Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Anibal Bher
Compostable Multilayer Films with Tailored Gas Barrier and Biodegradation
3.1. Film Structural and Functional Properties The thickness of single-layer and multilayer films is summarized in Table S3 of the Supporting Information , as determined by digital microscopy analysis. Figure 1 a shows the appearance of single- and multilayer films and their % T values at 600 nm, indicating their transparency. The lowest transmission value indicated that the PLA- g -TPCS-Gly film was hazier than the other structures. Figure S1 shows the % T of all the films versus wavelength.
Leveraging Life Cycle Assessment for Informing Packaging Eco-Design and Eco-Modulation
1 Introduction Over 2 billion tons of municipal solid waste (MSW) were generated globally in 2020 (UNEP 2024). The United States (U.S.) alone produced more than 300 million tons of MSW (U.S. EPA 2024b), and over twice that amount in construction and demolition (C&D) debris, as reported in 2018 (U.S. EPA 2024a).
Composting Performance of l-Poly(lactic acid), d-Poly(lactic acid), Their Blends, and Stereocomplex PLA Films
ACS Omega Cite this: ACS Omega 2025, XXXX, XXX Click to copy citationCitation copied! . This publication is licensed under CC-BY 4.0 . You are free to share (copy and redistribute) this article in any medium or format and to adapt (remix, transform, and build upon) the material for any purpose, even commercially within the parameters below: Creative Commons (CC): This is a Creative Commons license. Attribution (BY): Credit must be given to the creator.
Microstructural, mechanical, thermo‐rheological, barrier, and antimicrobial properties of coextruded tri‐layer polylactide/encapsulated geraniol/polylactide‐graphene nanoplatelets films
CONFLICT OF INTEREST STATEMENT The authors declare no conflicts of interest. Supporting Information Filename Description pat6488-sup-0001-Figures.docxWord 2007 document , 194.8 KB Supplementary Figure S1. Typical DSC thermogram of PLA/PLA-GER/PLA-GNP multilayer films at a heating rate of 5°C/min. Supplementary Figure S2. Melt rheology of polylactide-based multilayered films (PLA/PLA-GER/PLA-GNP) at 160°C (a) elastic modulus, (b) viscous modulus, and (c) complex viscosity.
Coextruded polylactide/encapsulated cinnamon essential oil/graphene nanoplatelets trilayer films: Morphological, barrier, thermal, rheological and antimicrobial properties
CONFLICT OF INTEREST STATEMENT The authors declare that there are no conflicts of interest regarding the publication of this article. Supporting Information Filename Description pen26630-sup-0001-Figure_S1.docxWord 2007 document , 46.6 KB Figure S1. The release of cinnamon essential oil from PLA/CEO single layer and PLA/PLA-CEO/PLA-GNP multilayer films in an ethanolic aqueous medium (volume ratio of 1:1) for a period of 5860 min. REFERENCES 1, , , , , .
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Anibal
Contact Anibal, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack