This is an excerpt from Fine Woodworking #14, Jan/Feb 1979 Click here to read the full digitized issue. Bolection turning is the inlaying of a narrow wooden strip into a groove around a turned object. The word bolection means a fillet or molding with part of its section set into a groove and part proud.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Barry Dima
Letter Carving Step-by-Step
[Content from FWW #14, p. 66] See the PDF for higher-quality photos. Carving incised lettering is a valuable skill in the repertoire of a professional woodworker and also an instructive practice for the beginner. Its decorative effect has many applications, and its visual appeal is universal. Incised letters are the opposite of relief and are cut directly into the wood without using a router; it’s actually a form of chip carving.
Designing Patterns on Laminated Bowls
[Originally from FWW Issue #13] Bowls can be turned from seasoned wood, green wood, or laminated wood. The results from seasoned or unseasoned stock are similar, but the bowls produced from laminated wood are quite different. I wanted to turn some bowls, but since I don’t have a chainsaw or a drying room, using green wood seemed beyond my capability. And I couldn’t afford to purchase a large slab of seasoned hardwood either. Therefore, I turned to making bowls from glued-up wood.
Throwback: Build an inexpensive DIY picture-frame clamp
To make the clamp, cut four L-shaped clamping blocks from 3/4-in. pine and groove the outside edges of the blocks a little wider than the rope diameter. Then round, smooth, and wax the grooves to minimize friction. Cut or drill a circular area at the inside corner of the blocks to allow for slight inaccuracies (which accumulate at that point) and to permit excess glue to escape. When you’re ready to glue, place a piece of waxed paper under each block to prevent it from becoming glued to the frame.
Throwback: Knockdown Tabletops Using Dovetails
Originally published in Fine Woodworking #20 For storage or shipment it is often advantageous for a tabletop to be quickly removable, while in daily service the top should be fastened securely enough for one person to be able to shift the table within a room. Here’s a pair of construction methods that require no hardware—one for tables with apron frames, a variation for pedestal frames.
Throwback: Hewing with a Hatchet
There are three basic types of ax work: chopping, where the person works diagonally to the grain, as in felling trees and bucking logs; splitting, where the wood is cut with the grain, as for firewood; and hewing, the most sophisticated of the three, in which the woodworker combines techniques of chopping and splitting. Hewing used to be common practice, and still has a place in the modern woodworker’s repertoire.
Throwback: Illustrations of a Drawbored Tenon
This blog is one part of three comprising Ian Kirby’s exploration of mechanically joined mortise-and-tenons. The other two cover through-wedged tenons and tusk tenons. These joints have the unusual characteristic of being able to function well without glue. Two of them, the tusk tenon and the drawbored tenon, can be disassembled without too much trouble. Once made, all three can be put together and worked on immediately; they are mechanically locked.
Veneering a Box with an Oyster-Shell Pattern
When a branch from a tree is cut transversely into thin slices and then applied to the surface of a box or piece of furniture, the grain and shape of the slices resemble oyster shell. Hence the name of this traditional decoration technique: oyster-shell veneering. Ernest Joyce, in his fine book, The Encyclopedia of Furniture Making, mentions the method, and that, along with the picture of a beautifully veneered cigarette box, led me to try my luck oyster-shelling a small plywood box.
Throwback: DIY dowel maker
Originally titled “A Dowel Maker” in Fine Woodworking #8—Fall 1977 Because commercial dowels in large diameters are expensive or hard to get, it is useful to make your own with the tool shown here. Properly sharpened and set, the tool turns easily around a square length of hardwood, cutting it smooth and round in a simple pass. The body of the tool is made from a block of hardwood about 2-¾ in. square and 7-½ in. long. First locate and bore a hole the diameter of the desired dowel.
Throwback: Make a Chair from a Sheet of Plywood - FineWoodworking
One afternoon a couple of years ago, furniture maker Peter Danko sat in a bar near his shop in Alexandria, Va., slicing up the menu card with a Swiss Army knife. A few slits and folds, and there it was: the one-piece plywood chair he had been musing about ever since touring the Thonet plant in Statesville, N.C. “I had thought it was so foolish, to cut up and bend all that wood only to glue it together again,” Danko recalls.
Scrap wood panel clamps
—This article is from FWW #20–Jan/Feb 1980. I know of no simpler, cheaper, or more convenient method to clamp up edge joints than the luthier’s technique for joining guitar tops and backs. Though intended for thin wood, the technique is easily adaptable to any thickness, width, or length. All that is needed are several long wedges, a few 1x2s (longer than the work is wide), and a length of ¼-in. rope. When the work is ready to be glued, lay it on the 1x2s as shown.
How to draw a basic acanthus leaf
After drawing different acanthus leaves through the years by simply copying earlier designs, I discovered that there can be a loosely applied mathematical approach to drawing them. The easiest way to understand the details of the design is to begin with drawing a symmetrical leaf. From there you can create more curling, decorative leaves with endless varieties. Once you unlock the mathematical formula, the secrets of the leaf begin to speak.
Finishing pine: 4 methods, 0 splotching
For such a ubiquitous wood, pine can be a blessing and a curse. It can build up your confidence like no other wood when working it, but all that can come tumbling down when you apply a finish. Its softness, pitchiness, and unevenly dense growth rings are challenges that may leave your finished piece looking less than the work you put into it.
Throwback: Making Ogee Bracket Feet Another Way
—This article is from FWW #21–Mar/April 1980. Ogee bracket feet, widely used during the Chippendale period of the early to middle 18th century, form a beautiful base for chests, tall clocks, desks, and many other pieces. However, to many beginning woodworkers, they appear difficult to construct. The traditional way involves shaping a long board of the required thickness, using molding planes. The instructions I have found for making ogee bracket feet have the ogee molding cut on the table saw.
Throwback: How to Hew a Beam in 10 Steps
—This article is from FWW #21–Mar/April 1980. Most areas grow at least one timber species that is suitable for log work. Some typical hewing woods include the pines, fir, spruce, redwood, tulip poplar, and oak, but you can also hew other woods such as black locust or maple. Within a species, certain trees will be more suitable than others. Knots add to the work involved, and the butt section of a tree is often much tougher than wood a few feet farther up the trunk.
Throwback: Edward Barnsley
—This article is from FWW #16–May/June 1979. In England many people consider Edward Barnsley to be the grand old man of furniture designers. What category of designer? Well, clearly far outside the furniture trade.
Throwback: How to sharpen a handsaw
—This article is from FWW #22–May/June 1980. A handsaw is a tool with a blade of tempered steel in which teeth have been cut. Different kinds of saws are made to perform different functions. The number of teeth to the inch and their shape vary according to the work the saw has to accomplish. The two basic woodworking saws are the crosscut saw, designed to cut across the grain of the wood, and the ripsaw, designed to cut with the grain. The crosscut-saw tooth cuts like a knife.
This DIY router table makes me a better woodworker
Roughly speaking, YouTube woodworking videos fall into two camps for me. The first often starts with, “Watch along as I figure this out”—or they dang well should if the person’s doing something for the first time or just winging it. I approach all woodworking content both critically and forgivingly, but these probably most of all. I make enough mistakes on my own, so I’ll seize any chance to learn from someone else’s.
How to make a better V-block
Excerpt from Fine Woodworking #10—Spring 1978 While making a flageolet, a small flute that resembles a recorder, I ran into difficulties in laying out and drilling the holes and in holding the flageolet down while working on it. Although I used a V-block, the slightest jiggle caused misalignments that became painfully evident after all the holes were bored.
MYL: An outdoor bench that's a gateway to indoor projects
If your urge to nest, like mine, doesn’t need help kicking into high gear, this video may be a liability. It may cause you, like me, to trip into a rabbit hole of watching more of the channel’s videos to discover ways to improve your home. And if you don’t own a home, as I don’t, that trip could hurt a little. But, I suspect you’ll find the host, Shoyan, to be charming and clever and with the coolest tools, more than offsetting the pain. That’s why I keep tuning in, after all.
How to create a lipped inset lid for a simple box
Of all the ways to top a box, I have two favorites at the moment. Both, fortunately, self-register the lid without costly hinges (and cheap ones are best left for shop projects). The first method is a wicked smart rabbet that you start before sawing the miters. The second, simpler one is the one I used on my box in “Make a Box with a Built-in Hinge” in FWW 303. This lid has a tab in front that slightly overhangs a notch in the box front.
Make a box with a built-in hinge
Synopsis: With continuous grain, interesting reveals and shadowlines, a painted base, and an ingenious design that provides for an easy-access, sealed lid without traditional hinges, this box blends utility and style. The mitered sides give the box a sleek look and the back, which pivots on a brass rod, is a snap to open and close. The plywood bottom adds strength, and color if you paint it like Barry did. This box was a happy accident.
Tools to look out for - Winter 2022
Air filter Jet’s AFS1000C detects dust levels down to 1 micron and can adjust the speed of its fan to suit the load. A remote allows you to manually change the speed or set the unit’s timer up to 16 hours. The unit has a tilted LED screen that indicates the fan speed and timer setting, as well as the remaining filter life. The system weighs 41.8 lb.
Review: Infinity sanding pads
A sanding pad is a critical aid when hand-sanding. It not only helps ensure a flat surface because it itself is flat, but the right ones also make gripping sandpaper less taxing. My problem is I rarely have one on hand. If I make one, I invariably lose it, so I end up grabbing a piece of scrap of about the right size and then making do. Thanks to Infinity’s sanding pads, I’m done settling. I tried the 5-in. circular and mouse pads when sanding a pair of interior doors, and both worked a treat.
From the bench: A splash of cold water
Synopsis: When your “dream shop” is in a small apartment bedroom, you make the most of the dream. For the past four and a half years, my shop has been a spare 11×11 bedroom in my apartment. It’s small, especially because not even all of that 121 sq. ft. is usable. I’ve had to be particularly strategic about which tools to keep, which to buy, which to sell, and which to skip altogether. The shop is also right off my bedroom.
Review: Infinity sanding pads
A sanding pad is a critical aid when hand-sanding. It not only helps ensure a flat surface because it itself is flat, but the right ones also make gripping sandpaper less taxing. My problem is I rarely have one on hand. If I make one, I invariably lose it, so I end up grabbing a piece of scrap of about the right size and then making do. Thanks to Infinity’s sanding pads, I’m done settling. I tried the 5-in. circular and mouse pads when sanding a pair of interior doors, and both worked a treat.
Tools to look out for this fall
Collapsible outfeed table Grizzly has developed its Bear Roll Outfeed Roller System (T32428), a collapsible outfeed table that attaches to the back of a cabinet saw or other tool with a solid base. The surface measures 36-1⁄2 in. wide and 40 in. long, including the mount. Owners will need to drill into their tool’s base to mount the outfeed table, for which Grizzly supplies a template and directions. Once installed, the table raises and lowers without the need for tools.
Workbench upgrades provide insight
Workbenches are one of those things that grab woodworkers’ attention at one point or another. For most, I imagine the appeal is strongest when they’re mentally building the most perfect bench of all time ever, so they consult what others built. I already did that for me, so now the appeal is seeing how and why other people work: How did they install that vise? Why did they choose that wood species? Why did they cut that joinery with this tool instead of that one?
A great relief carving for beginners and bosses alike
If you’re at all interested in carving, I’d bet good money your studies will quickly bring you to Peter Follansbee. He is, as far as I can tell, the only woodworker specializing at a high level in 17th-century carving—a very identifiable style—and teaching it around the country. He’s a wealth of information, so it’s both heart-warming and bonkers how much he gives away for free. For example, his blog has been running consistently since July 2008.
Ishitani Furniture Pierces My Hardened Heart
This is so embarrassingly jaded, but it’s hard to find romance in the shop anymore. It used to be so effective too, especially when I couldn’t get into there myself. For a jolt of woodworking from my old cubicle, I’d peruse Eric Sloane’s impossible expressive line drawings; read Brian Holcombe’s blog, where he wears cufflinks while making complex furniture by hand; or relish Lumberjock user mafe’s endless enthusiasm amid his tiny, cluttered space. Not now, though.
Tools to look out for - Summer 2022
High-hp fixed-base router Bora’s PM-6250 comes with a 3.25-hp, 15-amp motor and a fixed base with two D-handles. A ring on the base controls height adjustment. The motor has a soft start and variable speed from 10,000 rpm to 22,000 rpm. In addition to two collets, a 1⁄4-in. and a 1⁄2-in., the PM-6250 includes two subbases, one for standard bushings and another with a 2.5-in.-dia. opening for larger bits.
Fine pine finishes
Pine’s notoriously splotchy thanks to its uneven density, but that doesn’t mean it’s unusable. From subtle coloring to full-on painting, there are numerous routes for success. Pretreat Apply a touch of colorant and a layer of dark shellac. One of Klein’s preferred methods for working around pine’s blotchiness is to go light on the colorant (top) and use a darker shellac (bottom) as either the base layer or the final finish. Tip: Go darker, not deeper.
How to make a timber panel door
I’m in the middle of building interior doors for my parents. They want something carved, frame-and-panel, and with some rustic charm. I want something that involves smart and tested techniques so it doesn’t take months or twist like Chubby Checker when I transport it from my shop in Connecticut to their home in Florida. I’ve never made anything at this scale, so I dove into research. My favorite resource by far has been the Bradshaw Joinery YouTube channel.
My favorite DIY joinery
Pocket screws, dowels, or just screwing through face grain and into end grain for a butt joint: They’re all examples of DIY joinery. They all have their place, too, whether you’re looking for entry level or efficiency. So, I’m not going to poo-poo the other options as “not woodworking” and decry people forgoing secret mitered dovetails or whatever. Used well, DIY joinery works well. Instead, I want to add an example, slip mortise-and-tenons.
Tools to look out for this spring
Adjustable track saw square Woodpeckers has introduced a track saw square that will hold your track from square up to 60°, including detents every 5° and at 22-1⁄2°. The angle gauge can be recalibrated if necessary. The square slides into the underside of tracks, and holds onto them via a clasp. It will fit Festool, Makita, and Triton tracks.
Build small to design big
Blog If you want to learn how to design furniture, Aspen Golann recommends testing ideas on small objects, like she did with her wooden bench brushes. By Barry NM Dima Apr 06, 2022 When it comes to designing furniture, a common guidance from our authors is to create small-scale mock-ups—or maquettes if you’re feeling fancy. The idea is to suss out ideas with easy-to-use materials, such as hot glue and foam core or scraps, before you’re too deep into a build to recover from a wonky design.
Video: How to hang DIY floating shelves without special hardware
Black iron pipe is the solution. Just be prepared to patch some holes. By Barry NM Dima Mar 23, 2022 DCLA Universe My parents recently moved from southeastern Pennsylvania to a little below Tampa, Fla., leaving me the only Dima up north. But I can look past this abandonment because with their outdated condo comes updated renovations, including woodworking projects ranging from DIY to furniture.
Tools to look out for this spring
Tools & Materials Springa Goliath CNC, Rockler Dust Right Floor Sweep, Delta 18-900L drill press By Barry NM Dima #295-MAR/APR 2022 Issue CNC on wheels Springa’s Goliath CNC is a portable, self-driving CNC router that uses positioning sensors (at left) to help direct the cuts. Three wheels allow the CNC to move freely without interference from dadoes, grooves, or profiles already cut. It comes with integrated dust collection.
A dark horse of cutting rabbets by hand
If you cut rabbets by hand, there are some tried-and-true methods. Vic Tesolin covers three wonderfully in Handwork: Three Ways to Cut a Rabbet Joint. Megan Fitzpatrick weighs in, too, in Three Planes for Cutting Rabbets. Megan and Vic are whip-smart pros, and any hand-tool worker would do themselves a favor by getting familiar with their strategies. Before I got a router table, I used all of these methods and tools. Among them, a moving fillister plane was my favorite.
New Tools to Look Out for This Winter
Tools & Materials Bosch GEX335N and GEX336N random-orbit sanders, General's Smart Switch dust collectors, Crucible planing stop. By Barry NM Dima #294-JAN/FEB 2022 Issue Pair of random-orbit sanders For fans of 5-in. and 6-in. random-orbit sanders, Bosch has announced a pair of new models that replace earlier versions. The GEX33-5N is the smaller model, and the GEX33-6N is the larger. Both use hook-and-loop pads to secure sanding disks.
Video tour and tips for a small woodworking shop
An apartment wood shop is hopefully not your shop's final form, but it can still punch above its weight. By Barry NM Dima Nov 03, 2021 My small shop dictates a lot of things, so figuring out how to work with it has become a crucial part of my woodworking skill set. The space is 11 ft. x 11 ft., and not all of that’s usable—not ideal. But when Fine Woodworking lost its shop in 2018, I didn’t have room to whine about what’s ideal. I had to figure out my space, from storage to tooling to layout.
Sturdy, knock-down workbench
Synopsis: This beefy bench borrows a lot of details from benches that have come before–Roubo benches, timber-framed benches, and most specifically, the Moravian workbench. It’s heavy, portable, and straightforward to make. By laminating the parts for the base, you get a nice heavy workbench, capable of taking a beating, without having to buy expensive thick stock. It also makes the mortise-and-tenon joinery much simpler.
How to make a salt box
Salt boxes are appealing little things. In the kitchen, they offer a quick and ready way to grab a literal pinch of salt. In the shop, they’re small, fast, giftable projects—a winning trio. Fine Woodworking’s own John Tetreault made three lovely ones with mitered dovetails and a sliding lid in 2015. Me, I wanted a hinged lid. But none spoke to me until I saw chef J. Kenji López-Alt’s. I tweaked the concept some to better fit my tooling and aesthetics.
Tiny Bit of Wood for a whole lot of people
Eight years before starting her one-woman shop in Holt, Mich., Megan Shannon learned the healing powers of woodworking when she built her first project. Now, after setting up her space, Tiny Bit of Wood, she wants to open up her shop’s doors—and its ability to restore—to others, especially those who may have a harder time getting there, whether the barriers are financial or social. The start Shannon’s first build was a sewing table.
Tool review: Infinity router bit vise
Tools & Materials This two-sided vise holds a bit's shank securely against rotational forces when you remove or replace a bearing. By Barry NM Dima #288-Mar/Apr 2021 Issue Bearing maintenance is a cinch. This two-sided vise holds a bit’s shank securely against rotational forces when you remove or replace a bearing. One side is used when tightening, the other for loosening. There are some small tasks that prove to be outsize hurdles for me.
Robell Awake: Crafting change
Some of Robell Awake’s story sounds pretty familiar to most woodworkers. First, there’s the enduring itch to make. For him, it started in his early 20s when he dove into a DIY ethos inspired by his time as a bike messenger. After working various trade jobs, he homed in on carpentry and furniture work. Robell took an intensive hand-tool woodworking class at the North Bennet Street School in Boston, and he’s continued to expand upon his love for hand-tool woodworking back home in Atlanta.
New tools to look out for this winter
Tools & Materials Festool edge sanding guide, The Anarchist's Workbench, and Veritas 4-in. Carver's model drawknife. By Barry NM Dima #287-Jan/Feb 2021 Issue Sanding guide for angles Festool’s new edge-sanding guide promises to bring some balance to sanding. The pivoting cradle attaches to the company’s 5-in. ETS 125 REQ and the ETSC 125 random-orbit sanders. It works on different edges, angles, or curves. New workbench book If one thing unites woodworkers, it’s our love of workbenches.
Video: Watch Peter Follansbee carve a shallow relief pattern
Video You didn't get to visit Peter's shop with Barry and watch him carve in person, but this is almost as good. Plus you can wear your pajamas. By Barry NM Dima, Peter Follansbee Dec 17, 2020 Hey, Barry NM Dima here. I was the photographer for Peter Follansbee’s Master Class, “17th-century relief carving.” In that article, Peter takes you step-by-step through two carving patterns.
New woodworking tools to look out for this fall
Festool STM 1800 Mobile Sawing Table; Hedgehog Featherboard HH-30; JWS-10 variable speed wet sharpener by Jet. By Barry NM Dima #286-Tools & Shops 2021 Issue Festool is releasing its STM 1800 Mobile Sawing Table, a knockdown worktable for letting one person load, tip, and align large sheet goods by themselves. The table securely supports sheet goods up to 10 ft. by 7 ft., and it doubles as an assembly bench.
Tool Review: ISOtunes Free Bluetooth Hearing Protection
Tools & Materials Barry Dima takes a look at (and a listen to) Isotunes' new truly wireless bluetooth earbuds. By Barry NM Dima #284-Sep/Oct 2020 Issue Hearing protection for the shop is catching up with those fancy, cord-free Bluetooth headphones. ISOtunes’ latest offering, the Free, offers in-ear Bluetooth-capable hearing protection without any wires to tie you up. Most importantly, the Free earbuds, with a 22-db. noise reduction rating, are fantastic at blocking out shop sounds.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Barry
Contact Barry, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack