Skip To Main Content
Boshan Chen on Muck Rack

Boshan Chen

As seen in: SHS Web of Conferences
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work. Claim your profile
Back to Boshan Chen’s profile

Articles by Boshan Chen

|
By Boshan Chen
| SHS Web of Conferences
SHS Web of Conferences 218, 02022 (2025) Research on the Application of Artificial Intelligence in Quantitative Investment: Implementation Scenarios, Practical Challenges, and Future Trends * School of Finance, Tianjin University of Finance and Economics, Tianjin 300202, China * Corresponding author: chenboshan@stu.tjufe.edu.cn Abstract The rapid advancement of artificial intelligence (AI) technology has brought revolutionary changes to the field of quantitative investment.
Open in Who Shared Issue with article?

Shear Capacity of Cold-Formed Steel Channels with Edge-Stiffened Web Holes, Unstiffened Web Holes, and Plain Webs

|
By Boshan Chen, Krishanu Roy, Zhiyuan Fang, Asraf Uzzaman
| ascelibrary.org
Downloaded 0 times Technical Papers Abstract In this paper, a total of 254 results comprising 30 shear tests and 224 finite element (FE) analysis results are reported. Simply supported test specimens of cold-formed steel (CFS) channels with aspect ratios of 1.0 and 1.5 were tested. For comparison, specimens with unstiffened web holes and plain webs were also tested. A nonlinear elastoplastic FE model was then developed and validated against the experimental results.
Open in Who Shared Issue with article?

Axial Capacity of Back-to-Back Built-Up Aluminum Alloy Channel Section Columns

|
By Krishanu Roy, Boshan Chen, Zhiyuan Fang, Asraf Uzzaman
| ascelibrary.org
Downloaded 0 times Technical Papers Abstract An experimental investigation of 12 screw-fastened back-to-back built-up aluminum alloy slender columns under axial compression is presented, complemented by a numerical finite element study comprising 246 results. Using a laser scanner, the geometric imperfections were measured. In the numerical study, the effect of the modified slenderness, number of screws, and section thickness were investigated.
Open in Who Shared Issue with article?
Show More