Abstract Electrically conductive two-dimensional (2D) conjugated metal–organic frameworks (c-MOFs) are emerging electronic materials with tunable topologies and metal nodes. However, the uniform reactivity of conventional high-symmetry ligands typically leads to homogeneous linking, limiting the programmable construction of diverse topologies and metal nodes from a single-type ligand.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Darius Pohl
A robust high-performance H 2 S sensor enabling real-world wireless monitoring
Abstract Hydrogen sulfide (H2S) is a highly toxic and corrosive gas that requires continuous, real-time monitoring at ultra-low concentrations in complex environments. Here we report a wireless, ultra-low-power H2S sensing platform for long-term, on-site detection. The device achieves a response exceeding 10,000%, a calculated detection limit of 0.328 ppb, and a 7 s response at room temperature, while consuming less than 0.7 μW.
Diketopyrrolopyrrole-based two-dimensional poly(arylene vinylene)s with high charge carrier mobility - Nature Communications
Abstract Layered two-dimensional conjugated polymers (2D CPs), or 2D conjugated covalent organic frameworks, are promising semiconductor materials for (opto)electronics and photocatalysis, but their performance is often limited by insufficient in-plane conjugation and poor charge transport. Guided by density functional theory calculations, we report two donor-acceptor-type 2D poly(arylene vinylene)s constructed from thienyl-benzodithiophene and diketopyrrolopyrrole units.
Spin-to-Charge Conversion in Orthorhombic RhSi Crystalline Thin Films
1. Introduction Click to copy section linkSection link copied! Topological semimetals are a novel class of quantum materials characterized by topologically nontrivial band structures, (1) hosting Dirac, (2) Weyl, (3) or unconventional multifold Fermions, (4) which have been the focus of extensive research in recent years.
Spin-to-Charge Conversion in Orthorhombic RhSi Crystalline Thin Films
1. Introduction Click to copy section linkSection link copied! Topological semimetals are a novel class of quantum materials characterized by topologically nontrivial band structures, (1) hosting Dirac, (2) Weyl, (3) or unconventional multifold Fermions, (4) which have been the focus of extensive research in recent years.
Solution Shearing of Sustainable Aluminum Oxide Thin Films for Compliance-Free, Voltage-Regulated Multi-Bit Memristors
In this work, solution shearing approach is used to fabricate sustainable, de-ionized water based 15 nm aluminum oxide (AlOx) thin films employing a combination of low-temperature thermal annealing and deep UV exposure techniques. Their electrical performance is evaluated for memristive technology, demonstrating bipolar resistive switching and a stable ON/OFF ratio of ≈102. Devices exhibit endurance for 100 cycles and retention exceeding 40 h.
Longhorn Beetles form Structural Colour Using Calcium Phosphate Biominerals
Abstract Brilliant structural colours originating from diverse photonic crystals are found across many phyla, including the striking iridescent colours of beetles and butterflies, produced by three-dimensional photonic crystal structures in the specialized cuticular scales. However, the precise composition of these structures remains largely unknown, although it is key to unravelling colour production mechanisms and morphogenesis.
Dual Plasmons with Bioinspired 3D Network Structure Enabling Ultrahigh Efficient Solar Steam Generation
Abstract Externe IDs PubMed 39171754 Schlagworte Dual plasmons, Energy conversion, Interfacial solar evaporation, Localized surface plasmon resonance, Non-noble-metal plasmon
Eco‐Friendly Approach to Ultra‐Thin Metal Oxides‐ Solution Sheared Aluminum Oxide for Half‐Volt Operation of Organic Field‐Effect Transistors
Thin Film Characterization TEM measurements were conducted using a JEOL JEM F200 operated at 200 kV acceleration voltage equipped with a GATAN OneView CMOS camera for fast imaging. Local EDS analysis was performed using a dual 100 mm2 window-less silicon drift detector. XPS samples were transferred to an ultrahigh vacuum chamber (ESCALAB 250Xi by Thermo Scientific, base pressure: 2 × 10−10 mbar).
On-liquid-gallium surface synthesis of ultrasmooth thin films of conductive metal–organic frameworks - Nature Synthesis
Abstract Conductive metal–organic frameworks (MOFs) are emerging electroactive materials for (opto)electronics; however, it is challenging to achieve MOF-based devices using existing synthesis methods.
Lateral solid phase epitaxy of yttrium iron garnet
Solid phase epitaxy is a crystallization technique used to produce high-quality thin films. Lateral solid phase epitaxy furthermore enables the realization of nonplanar structures, which are interesting, e.g., in the field of spintronics. Here, we demonstrate lateral solid phase epitaxy of yttrium iron garnet over an artificial edge, such that the crystallization direction is perpendicular to the initial seed.
Electronic Modulation of Iridium Single Atomic Site in NiCr Layered Double Hydroxide for Improved Electrocatalytic Oxygen Evolution Reaction
Electronic Modulation of Iridium Single Atomic Site in NiCr Layered Double Hydroxide for Improved Electrocatalytic Oxygen Evolution Reaction Single Atom Catalysts (SACs) have shown immense potential in the field of electrocatalysis by effectively modulating the electronic properties of a heterogeneous matrix. Implementation of such cost-effective catalyst systems has become imperative for the facile completion of kinetically sluggish reactions like Oxygen Evolution Reaction (OER).
Quasi‐2D AgRuO3 Oxide with Facilely Activated Basal Planes for Efficient H2 Evolution
1 Introduction The utilization of power generated from renewable energy is highly demanded due to the increasing energy consumption and environmental issues in the world.
Accessing parity-forbidden d-d transitions for photocatalytic CO2 reduction driven by infrared light - Nature Communications
Abstract A general approach to promote IR light-driven CO2 reduction within ultrathin Cu-based hydrotalcite-like hydroxy salts is presented. Associated band structures and optical properties of the Cu-based materials are first predicted by theory. Subsequently, Cu4(SO4)(OH)6 nanosheets were synthesized and are found to undergo cascaded electron transfer processes based on d-d orbital transitions under infrared light irradiation.
Silver nanoparticle enhanced metal-organic matrix with interface-engineering for efficient photocatalytic hydrogen evolution - Nature Communications
Abstract Integrating plasmonic nanoparticles into the photoactive metal-organic matrix is highly desirable due to the plasmonic near field enhancement, complementary light absorption, and accelerated separation of photogenerated charge carriers at the junction interface. The construction of a well-defined, intimate interface is vital for efficient charge carrier separation, however, it remains a challenge in synthesis.
Precise tuning of interlayer electronic coupling in layered conductive metal-organic frameworks - Nature Communications
Materials The synthesis and characterization of 2,3,7,8,12,13-hexaiminotriindole (HATI) ligands with different steric bulkiness (methyl, n-propyl, and n-butyl groups, denoted as C1, C3, and C4, respectively) at nitrogen atoms of indole were shown in the Supplementary Information (Section S2 Synthetic procedures).
Correction to “Chemically Stable Carbazole-Based Imine Covalent Organic Frameworks with Acidochromic Response for Humidity Control Applications”
We recently reported on the design of two novel 2D imine covalent organic frameworks (COFs), DUT-175 and DUT-176 (where DUT stands for Dresden University of Technology), based on the 9H-carbazole tetratopic aldehyde and linear aromatic diamines. We showed that reversible protonation of the imine nitrogen leads to electronic structure changes in the conjugated π-system of the frameworks, further leading to a characteristic colorimetric pH response in a wide range without COF decomposition.
Chemically Stable Carbazole-Based Imine Covalent Organic Frameworks with Acidochromic Response for Humidity Control Applications
According to the U.S. Environmental Protection Agency, the ideal indoor relative air humidity ranges from 40 to 60%. Deviations from this range often cause severe diseases such as asthma or encourage the growth of fungus, mold, and dust mites. This problem is in particular urgent in Southeast Asia, where the relative humidity seldom falls below 60%, or at the another extreme, the Middle East Region with dry air.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Darius
Contact Darius, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack