Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Dibakor Boruah
Machine Learning-Based Predictions of Porosity during Cold Spray Deposition of High Entropy Alloy Coatings
All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess.
Understanding the Effect of Substrate Preheating Temperature and Track Spacing on Laser Assisted Cold Spraying of Ti6Al4V
3. Results and Discussion 3.1. Phase 1: Characterisation of Single-Track LACS Deposits 3.1.1. Surface Profilometry The surface profile of LACS single-track specimens (deposited with three different substrate preheating temperatures viz. 400 °C, 600 °C, and 800 °C, respectively) are presented in Figure 3. The laser spot of 4.4 mm diameter was found to be large enough to heat one-half of the track.
Impact Assessment of Dynamic Loading Induced by the Provision of Frequency Containment Reserve on the Main Bearing Lifetime of a Wind Turbine
This is an early access version, the complete PDF, HTML, and XML versions will be available soon. Open AccessArticle by Narender Singh 1,2,*, Dibakor Boruah 1, Jeroen D. M. De Kooning 1,2, Wim De Waele 1 and Lieven Vandevelde 1,2 1 Department of Electromechanical, Systems & Metal Engineering, Faculty of Engineering & Architecture, Ghent University, Tech Lane Ghent Science Park—Campus A, Technologiepark-Zwijnaarde 131, B-9052 Ghent, Belgium * Author to whom correspondence should be addressed.
Digital Image Correlation for Measuring Full-Field Residual Stresses in Wire and Arc Additive Manufactured Components
This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Dibakor
Contact Dibakor, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack