Theses Title ATLAS Inner Detector performance and alignment studies Author(s) González Sevilla, Sergio (Valencia U.) ; Marti i Garcia, Salvador (dir.) Thesis note PhD : Valencia U. : 2008 Subject category Detectors and Experimental Techniques Accelerator/Facility, Experiment CERN LHC ; ATLAS Abstract In this thesis, the work performed within the ATLAS Inner Detector is presented.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Gonzalez Sevilla
Detailed studies of full-size ATLAS12 sensors
The “ATLAS ITk Strip Sensor Collaboration” R&D; group has developed a second iteration of single-sided n + -in-p type micro-strip sensors for use in the tracker upgrade of the ATLAS experiment at the High-Luminosity (HL) LHC. The full size sensors measure approximately 97×97mm2 and are designed for tolerance against the 1.1×1015neq/cm2 fluence expected at the HL-LHC. Each sensor has 4 columns of 1280 individual 23.9mm long channels, arranged at 74.5?m pitch.
Charge collection and field profile studies of heavily irradiated strip sensors for the ATLAS inner tracker upgrade
The ATLAS group has evaluated the charge collection in silicon microstrip sensors irradiated up to a fluence of 1×1016 n eq /cm 2 , exceeding the maximum of 1.6×1015 n eq /cm 2 expected for the strip tracker during the high luminosity LHC (HL-LHC) period including a safety factor of 2. The ATLAS12, n + -on-p type sensor, which is fabricated by Hamamatsu Photonics (HPK) on float zone (FZ) substrates, is the latest barrel sensor prototype.
Embedded pitch adapters: A high-yield interconnection solution for strip sensors
A proposal to fabricate large area strip sensors with integrated, or embedded, pitch adapters is presented for the End-cap part of the Inner Tracker in the ATLAS experiment. To implement the embedded pitch adapters, a second metal layer is used in the sensor fabrication, for signal routing to the ASICs. Sensors with different embedded pitch adapters have been fabricated in order to optimize the design and technology.
CERN Document Server
The high-voltage (HV-) CMOS pixel sensors offer several good properties: a fast charge collection by drift, the possibility to implement relatively complex CMOS in-pixel electronics and the compatibility with commercial processes. The sensor element is a deep n-well diode in a p-type substrate. The n-well contains CMOS pixel electronics. The main charge collection mechanism is drift in a shallow, high field region, which leads to a fast charge collection and a high radiation tolerance.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Gonzalez
Contact Gonzalez, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack