Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Ian Bos
Artemis II Rocket Was Powerful Enough To Disrupt GPS
Rockets certainly have a substantial impact if you ever see a launch in person. The noise, shock waves, and even heat can be awe-inspiring. What is less obvious are the impacts a launch has on our upper atmosphere, or “anthropogenic space weather” as the fancy scientists call it. A pre-print from a recent study on Artemis II’s impact on our atmosphere shows a shockingly wide range of effects. As a whole, the impact on Artemis comes in waves.
Knitting Yarn And Filament With FilaLoom
We don’t generally think of 3D printing and knitting in the same sentence. One uses threads and fine motor control, while the other requires great knowledge of pressing buttons and plastics. That said, they both entail stacking material over and over until a finished product emerges. So why not blend the two crafts together? [Joram de Haas] decided to work on just that in the form of FilaLoom.
Evolving RC Circuits
We are surrounded by evolving algorithms and AI models, and it feels like we have to evolve to them as well. Of course, the world itself is always evolving, and when we have to implement filtering circuits based on current environments it might not last all that long. [Saikarthik Ramakrishnan] realized that this phenomenon can easily apply to simple RC circuits, so why not make them adapt to the changing world itself?
2026 Retrocomputing Challenge: Oldputer Gives Old Eyes Relief With E-ink Display
Modern computers are towers of glass and metal with very few large deviations from one to another. Monitor A will go against B, except you can’t tell them apart unless they’re on. At least, that is, compared to how different the old bulky monitors look compared to the new. [Andrzej Górski] seems to agree with this sentiment with his Oldputer, a blast from the past. [Andrzej Górski]’s inspiration came from one component, and the main component of the project, an old e-ink display.
TAKTO, Open Source Hand-Tracking Built Like LEGO
Hand tracking in VR/AR can add a substantial amount of immersion and added interactivity. Unfortunately, most camera based tracking suffers when fingers get covered, intertwined, or simply out of view of the headset’s camera. What’s even less common are methods of giving feedback to the user’s hands. [Sebastian Molano] saw these issues and decided if anyone was going to make an open-source solution, it was going to be him with his thesis on TAKTO. Clear visuals show step-by-step assembly.
The Big Moon Plot
When you look into the night sky, you can’t help but wish to bring the outer worlds to your doorstep. One of the best ways to do that is to photograph the Moon’s surface to display in a frame. However, [Sebastian Lague] found a simple image too lackluster compared to something with a bit more style, such as a plotted image of the lunar terrain. Why plotting? Well, the Moon is not defined in the same way with contrasting colors as Earth is.
Self-Repairing Conductive Material From Liquid Metal
PCB circuits are cool, but you know what is cooler? Terminator circuits that’s what! And what if the same material that makes Terminator circuits could also be used for smart heat sinks, flexible circuits, and self-healing material properties? Well, that is exactly what the lab at Virginia Tech’s VT MADE Lab has created, presented by Joel from [3DPrintingNerd]. So what does a Terminator circuit actually entail? Well, just like in Terminator 2, the circuits are made of liquid metal.
Functional Jumping Pokéball From An Ancient Pokémon World
When playing a game about Pocket Monsters, there’s one thing you can’t avoid using no matter what you do, and that’s a pokeball. Whether it’s a new or old game, you can’t avoid it. Many from different generations or spin-off games have their own fun spin, and that’s what [Kiara] wanted to explore with her custom made replication of an older style of ball. While beautiful on the outside from [Kiara]’s fine maker skills, it stands out compared to anything your kids might have from the functionality.
Junkbin, A Way To Efficiently Reuse Your Old Electronics
We all have that bin in the corner of our shops — the one with all the circuit boards or broken electronics that we are totally gonna do something with. We might rationalize that they’re worth keeping for the parts alone, but the reality is, unless you desolder and sort all the components ahead of time, most of us will never really use these spare parts to their full potential. Except it really doesn’t have to be that way. Junkbin.io is an attempt to improve on the state of that corner bin.
Fibrous Muscles For Humanoid Robotics
At the current rate of robotics development, you might assume that we’re close to Skynet taking over. However, while we likely wouldn’t do well in a physical fight against a robot, we can at least keep the bragging rights of having the cooler actuators. Or at least, that was the case before a new actuator came into town — introducing “Electrofluidic Fiber Muscles”.
CGI Motion Capture With Only A Camera
Computer-generated imagery (CGI) has largely replaced physical models in major film productions these days, but the transition didn’t exactly happen overnight. For a time there was an effort to blend the physical and digital, which allowed animators on productions such as Jurassic Park to work with newer technology in a way they were familiar with. [Corridor Crew] took this concept a step further by manipulating digital models with nothing but a webcam.
Is Now The Time For Volumetric 3D Printing?
Of all innovations adopted by the maker community within the past couple of decades, one stands among the rest on top for anything regarding manufacturing. It goes without saying here at Hackaday how many projects have been reliant on using the technology to turn their ideas into reality. 3D printing has been a maker community invention and, in return, has expanded this hacky community into something that anyone with an imagination can get into.
An Interactive Tomato Farm Overseen By AI
Oh, the farming lifestyle…living off the land, fending for yourself. But who’s got time for all that? For the modern hacker, the best option in the garden space may be this over-engineered automated AI tomato farm created by [Gerd Nicolay]. You can even interact with it right now through the magic of the Internet. [Gerd] started off with your run-of-the-mill pot and plant, choosing the humble tomato to keep the system simple.
Flight Sim Tracking From Spatial Audio
Flight sims are wonderful to play around with to get immersed in the position of a pilot. Racing sims can give you a thrill that can only be beaten by the real thing. However, most of this tech is on the more expensive side, so it would be great if you could use some of the hardware already found in your house. Many Sony headphones already have rotation and movement data built in for spatial audio, so why not start there?
Goddard The Robot Dog Brought To Life
There’s not much more nostalgic for many than good ole’ Jimmy Neutron. This was true for [Kiara], who saw the gorgeous pupper Goddard and wanted him for herself. Of course, there was no solution other than to make an animatronic version of the robot dog. Starting with some files ripped from a Jimmy Neutron GameCube game, Goddard was designed digitally before being printed in life size.
Fixing The Failure Of The Reevo
There are a lot of traditional features of a bike that rarely change. The spokes, the chain, and the inability for it to take off like a rocket, to mention a few. None of these are features of the Reevo, a bike that tried, and mostly failed, to innovate the traditional electric bike. [Berm Peak], an individual with more time on two wheels than the entire Reevo team ever had, tried his hand at fixing the Reevo’s many problems.
Emergency Bolt-Action Launcher For EpiPens
Imagine you and your friend are enjoying a nice sunny day, and BAM — they start to have a severe allergic reaction to who knows what. You have an EpiPen, but your friend is on the other side of a field! The solution? Obviously [Emily The Engineer] has only one option: build an entire EpiPen launcher! Starting off the life-saving project, [Emily] prototyped with a 3D printed blank and a simple solenoid-controlled glorified potato cannon.
MotoGP Rubber = Better Climbing?
Walking on grass, it’s easy, no matter the shoe. How about an inclined trail? Some hiking shoes or nice tennis shoes will do the trick. How about climbing a mountain? Now we are gonna need something special. [Magnus Midtbø] is a professional climber with an acute awareness of this fact and has used shoes of all kinds; however, today is something special. Imagine if you could use the technology of MotoGP to give you the same grip as a 1-liter bike. That is exactly what he tried out.
Ski Slopes For Laser Imaging
Lasers are cool and all, but they can be somewhat difficult to control at times. This is especially true when you have hundreds, thousands, or millions of lasers you need to steer. Fortunately, the MITRE Corporation might have created exactly what’s needed to accomplish this feat. While you might expect this to be done in a similar fashion as a DLP micro mirror array, these researchers have created something a bit different. A ski slope like a MEMS array is used to contort light as needed.
From Lunar Dust To Breathable Air
Moon missions are hot again for the first bit since the space race. While the previous period had us land on the big lunar rock, the missions of tomorrow have us living on it. The initial problem of landing in one piece has been solved, but there are many more puzzles to solve. One major issue of living in the vacuum of space is the lack of breathable air, because, ya know, it’s space.
A Nebula Straight From The Stars To Your Table
Space may truly be the final frontier, but maybe that frontier can be closer than you thought. Pictures of nebulae and planets bring the colorful sights of deep space right to your screen. You may even have models of some of the rockets used for those missions on a shelf. However, did you know that you could even have a model of those nebulae or planetary surfaces from [NASA]?
Retro Open Source Camera Straight From The ’90s
In our modern society, we have started to take the humble camera for granted. Perhaps because of this, trendy standalone cameras have started to take off. Unfortunately, most of the time these cameras are expensive and not any better than those in our everyday smartphones. If only there were some open-source solution where you could build and customize your own standalone device? [Yutani] has done just that with the SATURNIX.
Stadia Controller Reborn As Bluetooth Gamepad Adapter
Tech has a problem, an e-waste problem. Google is a common offender when it comes to this, creating a product just to end support a couple of years later. Thankfully, there are some lasting capabilities left in their defunct Stadia controllers. After hearing about these capabilities, [Bringus Studios] managed to turn this future e-waste into something new: a Bluetooth adapter for game controllers.
Venus Flytrap Takes Ride Through A Particle Accelerator
In the blue corner, we have the VENUS FLYTRAP! In the red corner, we have the underdog of the century, AN ENTIRE PARTICLE ACCELERATOR. Yes, you read that right. When you have a particle accelerator, it’s only second nature to throw anything you can into it. That’s why [Electron Impressions] put a poor fly-eating trap into their accelerator. Chloride and potassium ions leaving cause osmotic pressure in neighboring cells The match-up isn’t quite as arbitrary as it might seem at first.
A Simple Switch For Simply Too Much Current
A switch is simple: connect two pieces of metal together and bam! Except, it’s not that simple at high currents. How much current? Just about 400 car batteries worth would certainly cause some issues. This is the issue that [Technology Hobby] hoped to fix with his clever switch design. While many content creators are great at finding or making high-current sources (looking at you, Styropyro), their switches can’t always hold up to the abuse.
A Smart Printer Enclosure For The Open Source World
3D printing has had its time to spread its wings into the everyday home, yet many of those homes lack the proper ventilation to prevent the toxic VOCs from escaping. Because of this, [Clura] has put together an entire open-sourced smart enclosure for most open concept printers. While certain 3D printers or filament choices lend themselves to being worse than others, any type of plastic particles floating around shouldn’t find their way into your lungs.
Sub-Second Volumetric 3D Printing
One of the more promising 3D printing technologies that hasn’t quite yet had its spotlight is volumetric 3D printing. Researchers from the Department of Automation, Tsinghua University, have developed a new method that uses a high-speed periscope instead of rotating the printing volume — resulting in print times of less than one second. Normal volumetric printing uses a rotating volume of photosensitive resin to print nearly any geometry desired.
Scanning Table For The Professional Maker
Sometimes the simplest objects need some overthinking. This is exactly what [Chris Borge] realized when using his 3D scanner and finding that the included rotation table left quite a bit to be desired — providing him the perfect excuse to build a new one. One of the main features of a rotation stage is the, well, rotation. This was done in [Chris]’s case with a NEMA 17 stepper motor, perfect for precise rotation of scanning.
Pendulum Powered Battery
While the average person would use a standard charger to top off their phone, [Tom Stanton] is no average man. Instead, he put mind to matter with an entire pendulum battery system. Using the inductive effects of magnets on copper coils, [Tom] found the ability to power small components. With that in mind, the only path was forward with a much larger pendulum. A simple diode rectifier and capacitors allow for a smoother voltage output.
Beer Keg Plumbing For A Liquid Rocket
When you think of a high performance liquid rocket, what do you think of? Beer kegs? No? Well, when [Ryan] from the YouTube channel “Project KegRocket” saw a beer keg, the first thing he and his friends saw was a pressurized rocket body. You wouldn’t be crazy if the first thing you thought of was something designed by a massive company or university. Liquid rockets are far from simple to develop, with Keg Rocket being no exception. Liquid oxygen and alcohol is the oxidizer/fuel mixture of choice.
Binary And Digital Gradients For Telling Time
Creative clocks are a dime a dozen, even clocks that use binary have been created in nearly every format. [typo] promises a clever adaptation to the binary format, and it promises a more usable display. Using a combination of both traditional binary and digital gradients creates a usable and yet still nerdy fun clock. [typo]’s clock fits the traditional binary counting method with the hours on the left side of its face.
Arnis Brings The World To Minecraft: Bedrock Edition
A couple of years ago, we covered a project called Arnis, created by [Louis Erbkamm], which allowed you to generate any portion of Earth into Minecraft blocks and maps. It was already impressive, but since we last checked in the open source project has made some incredible progress. When we first covered Arnis, it was stuck on the Java edition of Minecraft.
Vice Of Old Brought To The Modern Age
People say they don’t make em’ like they used to, and while this isn’t always the case, it’s certainly true that old vices rarely die with time. This doesn’t mean they can’t use a refresh. [Marius Hornberger] recently backed that up when he decided to restore an old vice that had seen better days. Customized axial bearing assembly When refreshing old tools, you’ll almost always start the same: cleaning up all the layers of grease and ruined paint.
Seeing Sound For Under $200
There are five general senses: touch for feels, taste for food, smell for avoiding trash, hearing for sounds, and, of course, eyesight for visualizing the very waves making up that sound. [PlasmatronX] drives that last point home with his camera for sound waves, that’s even able to capture constructive and destructive interference. (Video, embedded below.) You may have heard of Schlieren imaging, which is usually used to capture the movement of air currents caused by heat sources.
Playing DOOM On A Receipt Printer
Gaming is a wonderful thing. Unfortunately for many of us, work takes up our valuable time, which should be allocated to our gaming. What if there was a better way? Well, printers can print an image quickly, and receipt printers can print a lot of images. This sounds like an effective display for DOOM in a pinch. [Bringus Studios] managed to find such a printer and got the classic shooter running.
Origami On Another Level With 3D Printing
Origami has become known as a miracle technique for designers. Elegant compliant mechanisms can leverage the material properties of a single geometry in ways that are sometimes stronger than those of more complicated designs. However, we don’t generally see origami used directly in 3D printed parts. [matthew lim] decided to explore this uncharted realm with various clever designs. You can check out the video below.
Rats Get Even Better At Playing DOOM
We all know that you can play DOOM on nearly anything, but what about the lesser known work being done to let other species get in on the action? For ages now, our rodent friends haven’t been able to play the 1993 masterpiece, but [Viktor Tóth] and colleagues have been working hard to fix this unfortunate oversight.
Magic Magikarp Makes Moves
One of the most influential inventions of the 20th century was Big Mouth Billy Bass. A celebrity bigger than the biggest politicians or richest movie stars, there’s almost nothing that could beat Billy. That is, until [Kiara] from Kiara’s Workshop built a Magikarp version of Big Mouth Billy Bass. Sizing in at over 2 entire feet, the orange k-carp is able to dance, it is able to sing, and it is able to stun the crowd.
Raise Bikes To The Heavens With Humble Garage Door Opener
Biking can be an incredibly rewarding hobby, but what do you do with all of your expensive pieces of metal and composite when you aren’t hitting the trails? They take up space that you could use for more bikes! [Chaz] figured there had to be a better way and discovered the unlikely solution of the humble garage opener. Garage doors are made to lift high with moderate weight, exactly what one would expect from a bike lift.
3D Printing For The Hospital Setting
Surgery is hard, there is a reason why school is so long for the profession. Making the job easier and smoother for both patients and surgeons is valuable for all parties, which is why [Mayo Clinic] is now working on including 3D printing into its more regular medicine pipeline. Prepping for surgery often requires examining CT scans of patients to figure out, well, what they’re even going to be doing.
An Online Repository For KiCad Schematics
In the desktop 3D printing world, we’re fortunate to have multiple online repositories of models that anyone can load up on their machine. Looking to create a similar experience but for electronic projects, [Mike Ayles] created CircuitSnips — a searchable database of ready-to-use KiCad schematics available under open source licenses. Looking for reference designs for LiPo chargers? CircuitSnips has you covered. Want to upload your own design so others can utilize it? Even better.
US Patent Changes Promise Severe Consequences
When someone creates a US patent, they go through a review process to stop the most blatant copies from previous patents or pre-existing work. After this, you may still have bad patents get through, which can be removed through litigation or publicly accessible methods such as Inter Partes Review (IPR). The latter of which is planned to be changed as we know it in the near future.
Designing PLA To Hold Over A Metric Ton
There’s never been such a thing as being “too competitive” when it comes to competition. This is something that [Tom Stanton] from Tim Stanton (wait, what now), [Tom]’s 2nd channel, took to heart for Polymaker’s 3D design challenge. The goal was simple: a single 3D printed part to hold as much weight as possible. While seemingly simple, when considering the requirements, including a single print in addition to being able to open up for the mounts, the challenge gets exponentially more complicated.
Camera Capabilities Unlocked From A Mouse
There is a point where taking technology for granted hides some of the incredible capabilities of seemingly simple devices. Optical mice are a great example of this principle, using what are more or less entirely self-contained cameras just for moving the cursor across your screen. Don’t believe us?
Artsy And Durable Recycling From A Heat Press
Plastic recycling is something that many of us strive to accomplish, but we often get caught up in the many hurdles along the way. [Brothers Make] are experienced in the world of plastic recycling and graced us with a look into a simple and reliable way to get consistent thin sheets of durable plastic. Using a common T-shirt press and a mixture of plastic scraps, you can get the process down quickly. Summarizing the process is pretty easy due to its simplicity.
Make Metal Rain With Thermal Spraying
For those of us hackers who have gone down a machining rabbit hole, we all know how annoying it can be to over-machine a part. Thermal spraying, while sounding sci-fi, is a method where you can just spray that metal back on your workpiece. If you don’t care about machining, how about a gun that shoots a shower of sparks just to coat your enemies in a layer of metal? Welcome to the world of thermal spraying, led by the one and only [Alec Steele].
Audio Sound Capture Project Needs Help
When you are capturing audio from a speaker, you are rarely capturing the actual direct output of such a system. There are reflections and artifacts caused by anything and everything in the environment that make it to whatever detector you might be using. With the modern computation age, you would think there would be a way to compensate for such artifacts, and this is what [d.fapinov] set out to do.
Print In Place Pump Pushes Limits Of Printing
3D printing has taken off into the hands of almost anyone with a knack for wanting something quick and easy. No more messing around with machining or complex assembly. However, with the general hands-off nature of most 3D prints, what could be possible with a little more intervention during the printing process? [Ben] from Designed to Make represents this perfectly with an entire centrifugal pump printed as one.
Holy Parachute Out Of Kirigami
If you have a fear of heights and find yourself falling out of an airplane, you probably don’t want to look up to find your parachute full of holes. However, if the designer took inspiration from kirigami in the same way researchers have, you may be in better shape than you would think. This is because properly designed kirigami can function as a simple and effective parachute. Kirigami, for those unfamiliar, is a cousin of origami where, instead of folding, you cut slits into paper.
Mesmerizing Patterns From Simple Rules
Nature is known for its intense beauty from its patterns and bright colors; however, this requires going outside. Who has time for that insanity!?!? [Bleuje] provides the perfect solution with his mesmerizing display of particle behavior. These patterns of color and structure, based on 36 points, are formed from simple particles, also called agents. Each agent leaves behind a trail that adds to the pattern formation.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Ian
Contact Ian, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack