Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Jacob Clatanoff
How to prevent shock and arc flash hazards in electrical systems | Consulting - Specifying Engineer
This article serves as a guide to understanding electrical hazards and establishing electrically safe work environments Learning Objectives Identify what electrical hazards to look out for. Understand the basics of existing codes and guidelines for safety-related work practices. Recognize ways to reduce risk while working on or near electrical equipment. Hazard insights Shock and arc flash hazards can cause serious injury or death.
Video: Arc flash mitigation
Learning objectives Understand major codes and standards related to arc flash mitigation design, such as NFPA 70E and IEEE 1584.1, plus other industry practices. Learn design techniques, including pros and cons, that will reduce arc flash incident energy. Use electrical power system software to simulate different mitigation approaches and system operations. Know that mitigating arc flash through design is paramount to electrical safety.
How to mitigate arc flash hazards in medium-voltage electrical systems
Mitigating arc flash hazards in medium-voltage systems could be performed in synergy to achieve optimal system reliability and safety Protective relays are the brain and intelligence behind a medium-voltage protective device. They are critical infrastructure for proper medium-voltage system operation and protection and increase system reliability.
Four areas that affect electrical safety in electrical, power systems
Learning Objectives Understand the key issues associated with arc flash and electrical safety in general. Appreciate the importance of electrical room design and safe working space. Learn the basics of safe lighting design for both maintenance and egress. Electrical safety insights Electrical safety requires several areas of expertise: System design, arc flash mitigation, room design, testing and commissioning and egress lighting.
Case study: Laboratory combines lighting and life safety lighting
SmithGroup was tasked with designing the lighting for a laboratory renovation for a major university system located in the Midwest. Because it was a laboratory, target illuminance within the laboratory space was designed around a 50 footcandle (fc) average at the work plane. Rather than designing separate egress lighting, it was more cost-effective to connect select light fixtures to a life safety power source than to provide separate dedicated emergency lighting fixtures.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Jacob
Contact Jacob, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack