Skip To Main Content
Kong Dejun on Muck Rack

Kong Dejun

As seen in: Wiley Online Library, Mechanical Engineering Magazine, Anti-Corrosion Methods and Materials
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work. Claim your profile
Back to Kong Dejun’s profile

Articles by Kong Dejun

Tempering Temperature-Induced Microstructural Evolution and Corrosion Resistance of Laser Quenched 40CrNiMoA Steel

|
By Wang Jian, Zhu Jian, Kong Dejun
| Wiley Online Library Verified
Conflicts of Interest The authors declare no conflicts of interest. Data Availability Statement Research data are not shared. References 1, , , , and , “Microstructure, Mechanical Properties and Wear Resistances of 40CrNiMoA Steel Affected by Cyclic Quenching Treatment,” Materials Today Communications 40 (2024): 109799.
Open in Who Shared Issue with article?

Atomic Force Microscope, Nanoindentation, and Tribological Performances of Arc Ion‐Plated AlTiSiN and AlCrSiN Coatings under Dry‐Friction Condition

|
By Kong Dejun, Wu Lihong, Jiang Yinfang, Wu Guoqing
| Wiley Online Library Verified
Conflict of Interest The authors declare no conflict of interest. References 1, , , , Ceram. Int. 2024, 50, 18655. 2, , , Metals 2023, 13, 907. 3, , , , , , Mater. Res. Express 2024, 11, 096402. 4, , , , , , , J. Nano Res. 2022, 73, 175. 5, , , , , Surf. Coat. Technol. 2021, 407, 126767. 6, , , , , Materials 2022, 15, 8605. 7, , , , , , , , , Coatings 2025, 13, 1448. 8, , , , , , , , , , Vacuum 2021, 193, 110516. 9, , , , , , , Nanomaterials 2025, 15, 503. 10, , Surf. Coat. Technol. 2022, 442, 128424.
Open in Who Shared Issue with article?

Microstructures and Friction-Wear Behaviors of Cathodic Arc Ion Plated Chromium Nitride Coatings at High Temperatures

|
By Zhu Shouyu, Kong Dejun
| Mechanical Engineering Magazine Verified
A chromium nitride (CrN) coating was deposited on YT14 cemented carbide using a cathodic arc ion plating (CAIP). The high temperature friction and wear of the obtained coating were investigated using a wear test. The results show that the Cr and N form the atom-rich zones in the coating. The average coefficient of friction (COF) of CrN coatings at 300?°C, 400?°C, and 500?°C is 0.50, 0.62, and 0.43, respectively.
Open in Who Shared Issue with article?

Microstructure and Tribological Properties of Cathodic Arc Ion Plated TiAlN and TiSiN Coatings at High Temperatures

|
By Kong Dejun, Kong Weicheng, Shen Hui
| Mechanical Engineering Magazine Verified
TiAlN and TiSiN coatings were deposited on YT15 cemented carbide using a cathodic arc ion plating (CAIP).
Open in Who Shared Issue with article?
Show More