The rise of “nuclear verdicts” has profound implications for insurance carriers and the insurance pricing environment. Brokers should implement strategies to optimally position their firms and clients. There’s currently an unprecedented hard insurance rate environment that has extended beyond five years.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Peter Kämpf
U.S. Insurance Brokerage Buyers Make Europe Part of Their Expansion Plan - MarshBerry
The entry point: The United Kingdom The natural starting point for European expansion for U.S. buyers has proven to be the U.K. Aside from the major benefit of a common language, the U.K. represents an economy, consumer base, and insurance distribution market that is very similar to the U.S. The U.K. also boasts the birthplace of insurance in London, where many U.S. brokers still do business and have existing ties (such as accessing capacity through Lloyd’s of London).
THE IMPORTANCE OF OWNING CLAIMS DATA FOR DELEGATED AUTHORITY FIRMS
Data control is crucial for delegated underwriting authority firms, as many lack contractual rights to claims underwriting data. This creates significant risks in their ability to adapt to market changes, maintain carrier partnerships, and maximize business value. How important is data to what you do?
Why are wind tunnel models sometimes placed upside down?
In the times before strain gages and electronic transducers, the forces on the wind tunnel model were measured with scales. To avoid interference as much as possible, the model was hung on strings, the scale being mounted above the measurement area of the tunnel. Since the forces in upright flight were of the highest interest, gravity plus lift would make sure that the strings were always taut.
Why did the Junkers Ju-52 have corrugated external surfaces?
It was largely a structural decision. The Ford Tri-Motor which was designed to mimic many things the Junkers plane designs included, including the corrugated metal. Corrugated metal is common for roof panels and ironically, hangers, these days. You can find some info on the strength and flex properties of it when related to those topics. Here is an interesting thread on increased drag (and load) on corrugated roofs.
Can fuel be stored in the anti-shock bodies?
Fuel is stored in fuel tanks, which typically have two requirements: Anti-Shock bodies are typically not fuel tanks - they meet neither requirement as they are not watertight (fuel will just pour out of them), and there's no plumbing to get the fuel out of, or for that matter into them. As "Exhibit A", take a look at the anti-shock bodies around the 787 flap tracks & actuators- Note that the anti-shock body is hollow, but unsealed.
Could airliners' wings be thinner if no fuel were stored in them?
The wing thickness is primarily dictated by structural demands. It has to provide an aerodynamic fairing for the wing spar. Making it thinner would drive up the mass of the structure inside. To simplify things, imagine the wing spar as an I-beam. It has two flanges which carry tension and compression loads, and a web between the flanges to transmit shear loads. The bending moment carried by the spar is the product of the forces in the flanges and the distance between them.
Recognise Tupolev Airliners
First, the Russian airplane industry is organized differently from its Western counterpart. While both have research organizations and aircraft manufacturers, in Russia and Ukraine design offices are between both. In Russia, TsAGI does most basic research and develops aerodynamic designs which are then put into fully developed aircraft by the design offices (Antonov in Ukraine, Ilyushin, Tupolev, MiG, Suchoi or Beriev in Russia).
Do Cargo flights carry anyone other than the crew?
Yes, cargo aircraft are like other aircraft in that there is generally at least a jump seat available. Especially larger aircraft will also have additional jump seats, a lavatory, and a galley. This area can be used for relief crew, or other crew that are just deadheading. There are exceptions though. The upper deck of the 747 is larger than just the cockpit, even on the cargo versions. There is more room in the back for additional crew.
Do flaps have a maximum speed limit but spoilers don't? Why?
This related question on Aviation SE describes how in most aircraft spoilers (flight spoiler mode not ground spoilers) are deploy-able at any speed But flaps on the other hand mostly have a V_FE above which they cannot be deployed. I assume the speed limit imposed on using flaps is due to structural reasons? I am just wondering why spoilers do not have a similar limit?
What aircraft could make non-stop transatlantic flights in 1958?
The first scheduled trans-atlantic air service was made possible with Zeppelins. The LZ-127 started flying the route in 1931, but was disassembled in 1940. The first airliner which was able to cover the distance (back then it was Berlin - New York) was the Focke-Wulf 200, which in 1938 needed almost 25 hours East-West and 20 hours on the return leg. With its slow cruise speed, wind made a lot of difference.
What aircraft could make transatlantic flights in 1958?
The first scheduled trans-atlantic air service was made possible with Zeppelins. The LZ-127 started flying the route in 1931, but was disassembled in 1940. The first airliner which was able to cover the distance (back then it was Berlin - New York) was the Focke-Wulf 200, which in 1938 needed almost 25 hours East-West and 20 hours on the return leg. With its slow cruise speed, wind made a lot of difference.
What is automatic control connections and how does it work?
The automatic hookup uses a catchment area to mechanically force the pushrod into a receptacle to ensure a proper mechanical connection when the parts of the plane are connected. As an example, I have sketched below how the ailerons would be connected. The blue structure is the fuselage-side part, and the green structure is the wing-side part of the control linkage.
aircraft design - Why does the yoke "stick" in a turning position? - Aviation Stack Exchange
I think it's a little bit of both -- for most aircraft, how they behave in a turn is a byproduct of their designed aerodynamic properties. This question is actually quite complex to answer.
Why are planes using rivets & not welded construction?
Short answer: High-strength aluminium alloys are tricky to weld correctly. Aluminium is such a fine material for aircraft structures that the need to rivet it is gladly accepted. While steel has a temperature range in which it gets more and more runny, aluminium alloys change from solid to liquid within a few degrees. Also, heat conductivity in iron-based alloys is lower than in aluminium, so heating steel locally will keep the surrounding material cooler and more solid compared to aluminium.
How do insects decrease aircraft performances?
You're right, insects are very small, so they influence things which happen on their scale. The one important phenomenon on an airliner which has the scale of insects is the boundary layer, the sheet of air around all wetted surfaces where air speed changes from zero (relative to the plane) to the speed it has at some distance. This is called the boundary layer. It's thickness changes from zero at the stagnation point to several centimeters at the end of a long fuselage.
Is there a good reason why modern airliners can't have conventional landing gears (vs. tricycle landing gears)
By "good reason", I mean a reason that we definitely cannot overcome with reasonable changes in aircraft design, control laws or procedures. As possible benefits of this I see a much smaller (= lighter) tail landing-gear than the nose landing-gear. Also, an opportunity to reduce tail-strike margins (=increase incidence, reduce landing speed).
How do insects decrease aircraft performance?
You're right, insects are very small, so they influence things which happen on their scale. The one important phenomenon on an airliner which has the scale of insects is the boundary layer, the sheet of air around all wetted surfaces where air speed changes from zero (relative to the plane) to the speed it has at some distance. This is called the boundary layer. Its thickness changes from zero at the stagnation point to several centimeters at the end of a long fuselage.
What are the factors behind increasing aircraft window sizes?
One of the important things I'd like to add to the previous answers is that the old air-crafts used to have smaller windows to accommodate for the rate of cabin depressurization in case of an emergency. The old airplanes had much smaller windows to control the cabin depressurization rate in case of some emergency (some window actually breaking to cause hull breach).
What is the story of changing (increasing) window sizes?
One of the important things I'd like to add to the previous answers is that the old air-crafts used to have smaller windows to accommodate for the rate of cabin depressurization in case of an emergency. The old airplanes had much smaller windows to control the cabin depressurization rate in case of some emergency (some window actually breaking to cause hull breach).
Why did the Solar Impulse flight take so long?
No, it could not fly much faster with the available energy. Lift is a question of wing area and dynamic pressure. Solar Impulse 2 has 269.5 m² wing area to carry its 2.3 tons of mass. This is a wing loading of just 8.53 kg/m²; much less than even gliders have (they start at around 30 kg/m²).
Even after years of research, why are planes unable to keep passengers alive in case of a fiery crash?
The principal reason plane crashes are less survivable, which nobody really seems to fully grasp when talking about airliners, is the sheer amount of energy inherent in a commercial airplane. When you watch a plane coming in for approach, especially a big one like a 747 or A380, it usually seems very docile, with the plane very slowly and gently approaching the runway.
Why do airplanes have to retract landing gear?
In the early days of aviation it was simply easier to have the gear fixed. The landing gear adds drag, but so does a second wing and wire braces. Airplanes generally did not fly very fast or far, so the drag from the landing gear (and that other stuff) was not a big issue. The first design with retractable gear dates to 1911. Since then, retractable gear has been a design decision each airplane must make. Retracting the gear into the airplane allows for a cleaner form, which reduces drag.
Why does a missile have small wings but a better agility than a plane?
First of all, a missile is operating at a much higher dynamic pressure than the airplane. After all, it has to catch up with it to do its job. Since dynamic pressure scales with the square of airspeed, the wings of a missile twice as fast as the target would need only a quarter of the wing area to produce the same forces. Secondly, the missile uses its thrust just as much as the lift from its vanes to change direction.
Why does a missile have small wings but better agility than a plane?
First of all, a missile is operating at a much higher dynamic pressure than the airplane. After all, it has to catch up with it to do its job. Since dynamic pressure scales with the square of airspeed, the wings of a missile twice as fast as the target would need only a quarter of the wing area to produce the same forces. Secondly, the missile uses its thrust just as much as the lift from its vanes to change direction.
What would happen if a helicopters rotor hit the [in-air] refueling probe?
It would chop it right off. Watch the video. It's fun. When the helicopter pitches up right after refueling, the rotor disc cannot follow the movement (its hinges allow the blades to pitch up and down, and inertia makes it change its plane of rotation only slowly). The refueling probe is cut cleanly in half. However, I would not try this on purpose. The risk of damaging a blade is considerable. I am sure the rotor blades needed to be replaced after that incident.
How do wings generate lift?
Short answer: by exerting a downward force on the air around them. Long answer: Some outreach people at NASA's Glenn Research Center have written up a very good multi-page explanation, dealing individually with each contributing effect, as well as some discussion of why explanations you might have heard at school don't work. Since the navigation there is a bit funky, I'll link each page individually with a short summary.
Why do airplanes have curved windows?
The sharper you make a corner, the higher the stress will be. This is undesirable since it will increase the stress on the material and can promote fatigue which can lead to structural failure down the road. You can avoid this problem by having a greater curve radius. This does not only apply to windows, but cabin/cargo doors as well on an aircraft.
Why do some fighters have two engines and other have only one but still give the same performance?
Some countries don't get the most powerful engines and have to use what is available in the market. To avoid upsetting China too much, the US would not sell the F404 or the F100 to Taiwan, and a derivative of a civilian engine had to be developed.
Will driving experience benefit flight training?
I think my question/situation is a little bit of rare so I start this question and want to hear from you experience pilots. I'm a 30+ migrant from China working as a software engineer for 10 years. Now I use my weekends taking flight training for Private Pilot Licence in Sydney. Currently I don't see any big problem with my training and probably in next couple of weeks I will have my first Solo. What concerns me is my past experience.
Excess lift or excess power needed for a climb?
As the answers to your original question already explained, you do need extra lift to accelerate upwards. Once the wing is set into a vertical motion, however, lift again exactly equals drag to keep the wing at a constant vertical speed. No extra lift is needed to maintain that vertical speed. Only when you want to accelerate further up, extra lift is needed. Now let's look at your experiment: I assume the wing has some mass, is rotationally locked and slides up and down that pole without friction.
Why does an aircraft as big as the Airbus A400M use turboprops?
As RedGrittyBrick showed, the aircraft are certainly similar in external dimensions, with the A400M being a bit smaller than the C-17. However, the differences are in what the aircraft are designed for. The C-17 is designed to carry heavy cargo long distances, while the A400M is designed to carry lighter cargo shorter distances. The C-17 is powered by 4 turbofan engines which can together produce 160,000 lbf of thrust.
Which airplane designs have the greatest longevity?
What airplane designs have been around the longest, from first flight through last retirement from active commercial or military service? My guess is that the DC-3 will win, since it has been around since before WW II and is still in service, although there are enough other designs out there I'm not familiar with that I'll be interested to see where I may be wrong on that. (Russian designs come to mind as an obvious source of possibilities.) Can anything out there beat the DC-3?
Airplane designs with greatest longevity
What aircraft designs have been around the longest, from first flight through last retirement from active commercial or military service? My guess is that the DC-3 will win, since it has been around since before WW II and is still in service, although there are enough other designs out there I'm not familiar with that I'll be interested to see where I may be wrong on that. (Russian designs come to mind as an obvious source of possibilities.) Can anything out there beat the DC-3?
What is the purpose of a dorsal fin such as on the Boeing 737?
The "extension" at the front is called "dorsal fin". The double-sweep of the leading edge of the vertical stabilizer helps the vertical stabilizer to be effective at a larger range of side-slip angles (high lateral angles of attack). The stabilizer is an airfoil, much like a wing.
How to calculate the lift starting from the vertical speed?
Yes, it is. Here is how: Note that the altitude is only needed if you use the altitude-specific value of $g$. Using the standard value will give you a negligible error. Please note also that lift > weight will result in an upward acceleration. In a quasi-stationary climb or sink the lift will be slightly smaller than the weight.
Why are radial engines uncommon on commercial aircraft?
Noise should not be the problem. Modern turbo prop driven aircraft are even more quiet compared to similar aircraft driven by jet engines. It is - like always - all about economy. Let's talk about the available engine types. (All you experienced aviators, I'll keep it very simple and so in some points even not 100% correct.
Why don't small planes use turbine (turboprop) engines?
Fortunately this stereotype is changing, albeit slowly. Small GA engine development has been stuck in the back seat for generations and it's great to see a number of new start ups making the push towards change. The TP100 Turboprop by PBS is once such product. I really hope they reach their potential and bring the product to market, even if only to experimental parties. Continental is aggressively developing their new diesels and will be launching a new 230 ish hp unit in the next year.
How is a wing designed to be stall or spin proof?
It's really two separate questions. In both cases the wing is not alone, it is the whole configuration, especially when it comes to spins. A stall is unavoidable. At some point the airflow over the wing will start to separate, and if this flow separation is extensive enough to limit the increase in lift with increasing angle of attack (AoA), the wing stalls. To make stall characteristics benign, the outer wing should still have mostly attached flow to enable the ailerons to correct roll angle.
Why are aircraft turbine blades made of nickel alloys?
Not all turbine blades are made of nickel alloy, some blades are made of such family of alloys but clearly not all. Some blades are actually made of ceramic materials. Turbine is always located after combustion chamber amd the temperature the first stage of turbine blades is able to resist is a proof of high technology engine. Those blades are exposed over to 2000ºC, meltin point of steel is around 1100ºC, nickel can go much further up to 1700ºC. Ceramic can go further.
How is the weight of an airplane measured?
The empty weight of airplanes can only be given to single-pound precision for one specific airplane. Minute differences in metal sheet thickness, equipment and paint will make sure that there is a difference of many pounds between airplanes of the same type and furnishing. Add to this the difference in seating, galleys and instrumentation between airplanes of the same type which are operated by different airlines, and a precise number as in your question becomes almost meaningless.
How do friendly stealth planes locate each other?
The accounts that have been published of F-117 missions indicate that they generally flew single-ship, rather than formation missions, and it seems probable that B-2 aircraft do likewise. So in a sense, the important question for those aircraft isn't "how do I know where (another stealth aircraft operating nearby) IS," but "how do I ensure that we don't collide with each other," and that's a much easier question.
Would it be viable to install a screen in front of jet intakes to prevent them from sucking in birds?
Modern high-bypass turbofan engines work by pulling in immense volumes of air and accelerating it. A screen as proposed would make that task far more difficult, which would ruin the efficiency of the engine. It's also pretty well unnecessary. Jets worldwide take plenty of birdstrikes every day.
How do paper airplanes create lift if their wings are flat?
Paper airplanes create lift just like any other airplane. Don't let the wing cross section confuse you; what the air "sees" is a different shape. When a flat plate flows through air at a positive angle of attack, the stagnation point of the flow (where air splits into an upper and a lower flow path) sits slightly below the forward edge of the wing.
What is propeller / engine sync and how does it work?
I don't know how it is achieved, but here is the reason: If you have two sources of the same noise, with nearly the same frequency, the sum of both noises will be a noise of slowly increasing and decreasing volume. It's called beat and can become very annoying. To demonstrate this, there you see two sinus-tones of almost same frequency, and what happens if you mix them: The blue curve is of frequency $(f_1-f_2)/2$.
Would connecting propeller blades with a continuous ring reduce induced drag?
As others have pointed out, fitting the ring to the prop will greatly increase the stress on the blades. The same effect can be had with a nicely fitted shroud. There has indeed been a plane which used this concept, the RFB FanTrainer (see picture below). To reduce weight and wetted area, the prop diameter was much smaller than with a regular propeller, so the overall efficiency was not better.
Can you fly a plane in a wind tunnel?
You certainly could fly a completely assembled aircraft in a sufficiently-large wind tunnel -- at least in theory (theory is an awesome place - everything always works there. When I retire I'm moving to theory).
How to go about designing a custom airfoil
Wing sweep, incidence, and airfoil geometry will all have to be adjusted to achieve the best performance at a certain air speed, density, and Reynolds number. The software that egid mentioned is a good place to start. While studying aerospace in college, XFOIL was used for basic airfoil analysis in our classes. Another program used was AVL. This analyzes the aircraft as a whole and can model other things such as dynamic stability.
Gearbox used in turbofan and turboprop
Both. Each has its own optimal speed (that is not the same) and the gear allows them to work at that speed. It does not "know", it is simply built so that everything will run smoothly. In this question it has been explained why there is not manual transmission on aircrafts: the gear ratio is fixed. This also answer your question, it is fixed and the gear ratio is selected during the design phase. Because the propeller runs at much slower speeds.
Given the same engine, why install a gearbox on a turboprop but not on a turbofan?
The bigger the diameter, the lower the optimum speed. Generally, fan and propeller blades should run at a high dynamic pressure, but still at subsonic speeds to avoid the higher losses involved with supersonic flow. Since the tip will be the part with the highest speed, and propellers have bigger diameters than fans, propellers run at lower speeds.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Peter
Contact Peter, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack