Abstract Accessing reversible four-electron iodine redox chemistry in aqueous metal–iodine batteries offers a promising route towards high-energy aqueous energy storage, but has conventionally relied on highly concentrated, corrosive halogen-containing electrolytes to stabilize reactive hypervalent iodine cations through interhalogen complexation1,2,3,4,5,6,7,8,9.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Ruwei Chen
Water serves as a charge-transfer medium for ultrafast aqueous batteries
Abstract Charge storage in aqueous batteries is commonly understood through an ion-centric picture, in which metal ions or pre-existing protons transport and compensate charge. However, conventional metal-ion diffusion and proton insertion do not fully account for seconds-level kinetics, strong cation–electrode specificity and experimentally detectable proton signatures observed at the low equilibrium proton concentrations in aqueous metal-ion batteries.
Studies on Counter Electrode Materials in Aqueous Zinc Half-Cell Configurations
1 Introduction Aqueous zinc ion batteries (AZIBs) are emerging as a potential ‘game changer’ in the modern energy storage landscape [1-3]. Although lithium-ion batteries (LIBs) dominated the energy storage market for several decades, their intrinsic safety concerns make them unsuitable for large-scale energy storage [4, 5]. In contrast, AZIBs offer significant advantages, including intrinsic safety, natural abundance, and a higher volumetric capacity of zinc anodes (5851 mAh/cm3 vs.
Interfacial ion depletion at high concentration guides electrolyte design for aqueous aluminum-iodine batteries
Keywords aqueous multivalent batteries aluminum-iodine batteries concentrated electrolytes bulk-interface decoupling choline chloride additive interfacial ion regulation solvation structure water-in-salt electrolyte design polyiodide confinement Introduction Aqueous aluminum batteries (AABs) have recently emerged as a promising class of aqueous energy storage systems due to their intrinsic safety, cost-effectiveness, and high theoretical volumetric capacity (∼8,040 mAh cm−3 for Al3+).1,2,3...
Redox-Active Antimony Sulfide Frameworks for Dynamic Radioiodine Capture
Energy, Environmental, and Catalysis ApplicationsDecember 12, 2025 Fu Peng State Key Laboratory of Radiation Medicine and Protection, School of Radiation Medicine and Protection, Collaborative Innovation Center of Radiological Medicine of Jiangsu Higher Education Institutions, Soochow University, Suzhou 215123, China Linwei He State Key Laboratory of Radiation Medicine and Protection, School of Radiation Medicine and Protection, Collaborative Innovation Center of Radiological Medicine of...
Zn-thiocatecholate functionalized MOF modified separator stabilizing zinc anodes for long-life aqueous zinc-ion batteries
Zn-thiocatecholate functionalized MOF modified separator stabilizing zinc anodes for long-life aqueous zinc-ion batteries A separator (UiO-dcbdt-Zn@GF) modified by Zn-thiocatecholate functionalized MOF is proposed. Benefiting from the unique [S-‒Zn–S-] zincophilic moieties, UiO-dcbdt-Zn@GF ensures a uniform distribution of zinc ion flux, enhances ion migration kinetics and assists in the desolvation of hydrated zinc ions, thereby promoting the reversibility of Zn anode in Zn ion batteries.
Untangling the Role of Capping Agents in Manipulating Electrochemical Behaviors Toward Practical Aqueous Zinc‐Ion Batteries
1 Introduction AZIBs have attracted significant attention as a promising electrochemical energy storage solution for grid-scale and other stationary applications in the post-lithium era.[1, 2] With environmental friendliness, inherent safety, high theoretical capacities (5855 mAh cm−3 and 820 mAh g−1), and low cost, they stand out among other alternatives.[3] Despite these advantages, several long-standing challenges, particularly the poor battery reversibility and stability caused by both...
Untangling the Role of Capping Agents in Manipulating Electrochemical Behaviors Toward Practical Aqueous Zinc‐Ion Batteries
1 Introduction AZIBs have attracted significant attention as a promising electrochemical energy storage solution for grid-scale and other stationary applications in the post-lithium era.[1, 2] With environmental friendliness, inherent safety, high theoretical capacities (5855 mAh cm−3 and 820 mAh g−1), and low cost, they stand out among other alternatives.[3] Despite these advantages, several long-standing challenges, particularly the poor battery reversibility and stability caused by both...
Induced Anionic Functional Group Orientation‐Assisted Stable Electrode‐Electrolyte Interphases for Highly Reversible Zinc Anodes
1 Introduction The accelerated evolution of portable intelligent electronic devices, electric vehicles and large-scale energy storage devices have generated a growing demand for high-performance rechargeable batteries.[1-4] Lithium-ion (Li-ion) batteries occupy a major market share of current secondary batteries owing to their high energy density and remarkable cycling stability.
Rational Design of an In‐Situ Polymer‐Inorganic Hybrid Solid Electrolyte Interphase for Realising Stable Zn Metal Anode under Harsh Conditions
Introduction Rechargeable aqueous zinc-ion batteries (RAZBs) have been regarded as promising candidates for large-scale energy storage applications because of their low cost, high safety, and high theoretical capacity (820 mAh g−1 and 5855 mAh cm−3) in terms of mildly acidic aqueous electrolytes and Zn metal anodes.1-3 However, interfacial stability and compatibility in RAZBs are still needed to be optimized under operation due to the electrochemical activity of the Zn metal anode and its...
Robust Zinc Anode Enabled by Sulfonate‐Rich MOF‐Modified Separator
Conflict of Interest The authors declare no conflict of interest. Supporting Information Filename Description smll202305687-sup-0001-SuppMat.pdf1.9 MB Supporting Information References 1a) , , , , , , , Chem. Soc. Rev. 2020, 49, 180; b) , , , , , , Chem. Soc. Rev. 2020, 49, 4203; c) , , , , , , , , , , , , , , , , Angew. Chem., Int. Ed. 2022, 61, e202112304. 2a) , , , , , , , , , , Nat. Mater.
Hydrated Deep Eutectic Electrolyte with Finely-Tuned Solvation Chemistry for High-Performance Zinc-Ion Batteries
Hydrated Deep Eutectic Electrolyte with Finely-Tuned Solvation Chemistry for High-Performance Zinc-Ion Batteries Ruwei Chen, Chengyi Zhang, Jianwei Li, Zijuan Du, Fei Guo, Wei Zhang, Yuhang Dai, Wei Zong, XUAN GAO, Jiexin Zhu, Yan Zhao, Xiaohui Wang and Guanjie He Abstract Despite their cost-effectiveness and intrinsic safety, aqueous zinc-ion batteries have been struggling with poor reversibility originating from various active water-induced side reactions.
Interface Engineering of Biomass‐Derived Carbon used as Ultrahigh‐Energy‐Density and Practical Mass‐Loading Supercapacitor Electrodes
2.1 Synthesis of N/S-Co-Doped Graphene-Like Carbon N/S-co-doped graphene-like carbon was synthesized using the g-C3N4 sacrificial template method by pyrolyzing urea and lignosulfonate mixed precursors (Figure 1a). To verify the feasibility of the sacrifice template method, the pyrolysis behavior of different precursors was tracked by thermogravimetric analysis (TGA).
Highly Reversible Zinc Metal Anode in a Dilute Aqueous Electrolyte Enabled by a pH Buffer Additive
As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors.
Transparent, flexible and recyclable nanopaper-based touch sensors fabricated via inkjet-printing
Transparent, flexible and recyclable nanopaper-based touch sensors fabricated via inkjet-printing Hao Ling, Ruwei Chen, Quanbo Huang, Feng Shen, Yuyuan Wang and Xiaohui Wang Abstract Transparent, flexible, and eco-friendly touch sensors are important components for next-generation green electronics such as wearable sensors and e-skins.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Ruwei
Contact Ruwei, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack