As production demands increase, more material passes through the conveyor system at faster speeds. However, if the conveyor system design doesn’t change to compensate, the result is most often excessive dust, spillage, and broken idlers as the system struggles to keep up with volumes it’s not graded to handle. As managers seek to save money on equipment upgrades, some designers cut corners that can cause more issues than they solve. Here are some things to watch for and practical advice to follow.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Todd Swinderman
Conveyor safety training can boost results and ROI
The hours spent training production and maintenance teams can lead to variable results. They might just tick the boxes without providing a return on investment. Or they can enhance safety, foster team building, and develop a deep understanding of the equipment that boosts efficiency and uptime. Training should be robust and encourage problem-solving using modern methods and standards.
Best practices for servicing conveyor belts
The need for conveyor belt cleaning is well established. Excessive fugitive material can reduce component and belt life by as much as 30 percent, while a multiple-belt cleaner system contributes less than 5 percent to overall belt wear, delivering a significant benefit. Further, the effect of a properly adjusted cleaner on the belt is far less than one that is under- or overtensioned and allows material buildup to contribute to increased wear.
Training for Safer Conveyor Service and Maintenance
Dedicated educators guide personnel along a path of best practices and continuous learning. By: Jerad Heitzler and Todd Swinderman, Contributors Bulk handling belt conveyors are typically massive, powerful systems that can move tons of material per hour. They are essentially a giant elastic band, stretched tight and threaded through a maze of components then loaded with tons of material.
Guarding by Location: Danger and compliance
The global leader in conveyor safety is disputing the idea that putting conveyor equipment out of reach or inconveniently placed away from workers – known as “guarding by location” – is a valid form of safety. After decades of safe equipment design and comprehensive conveyor safety training in the bulk handling industry, Martin Engineering experts have witnessed where guarding by location has led to a lapse in workplace safety, resulting in injuries and – in some cases – fatalities.
Skirting around the issue
Are your skirts rubbing you the wrong way? By Todd Swinderman. Any discussion around the best practices of “skirtboards as a system” must include elements of the entire loading zone as each element impacts the effectiveness of the skirtboards to perform well as a system. The term skirtboard is derived from the early practice of using wooden boards to confine the load on conveyors.
Conveyor Technology:Designing for the Future by Innovating the Present @BiomassMagazine
Higher production demands across all bulk handling segments require increased efficiency at the lowest cost of operation, in the safest and most effective manner possible. As conveyor systems become wider, faster and longer, more energy output and more controlled throughput will be needed.
Engineering safer conveyors: Art meets Science
Additional attention to detail early on can pay dividends in safety and life-cycle costs CREDIT: MARTIN ENGINEERING All new conveyor systems will inevitably succumb to the punishing bulk handling environment and begin the slow process of degradation. The system will eventually require more time and labour for maintenance, experience shorter spans between outages and longer periods of downtime, and the cost of operation will escalate.
Designing Safety into Conveyors
All new conveyors inevitably succumb to the punishing bulk handling environment and begin to slowly degrade. They will eventually require more time and labor for maintenance, and the time between outages will continually shrink as the costs of operations will climb. The ongoing degradation is also accompanied by higher risks of injuries or fatalities as workers are more often called on to clean and maintain the conveyors and to fabricate short-term fixes to long-term problems.
Keeping Up the Pressure
Given the number of conveyor-related injuries that occur during routine maintenance and cleanup, every bulk material handler has a vested interest in technologies to help reduce hazards and prevent injuries. Seemingly mundane tasks such as adjusting belt cleaners and removing spillage often require employees to work in close proximity to the moving conveyor, where even incidental contact can result in serious injury in a split second.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Todd
Contact Todd, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack