Introduction Musculoskeletal disorders remain one of the leading causes of pain, disability, and socioeconomic burden worldwide. Across orthopedics, sports medicine, and rehabilitation, a deeper understanding of the biomechanical behavior of joints, ligaments, tendons, and associate structures is essential for advancing preventive, diagnostic, and therapeutic strategies.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Engineering Laboratories
Preclinical Validation of a Patient-Specific Patch-Planning Workflow for Congenital Cardiovascular Reconstruction - Annals of Biomedical Engineering
Abstract Branch pulmonary artery (BPA) reconstruction is associated with high reintervention rates. We present in vitro validation of a patch-planning workflow accounting for vessel prestretch, tissue properties, and suture uptake, to achieve targeted reconstructed dimensions. Two physiologically compliant, centrally stenosed BPA silicone models were created to represent neonatal and child-age repairs. Preoperative CTs were segmented to create 3D models for virtual planning.
NOMO-1 cells expressing an NF-κB luciferase reporter gene facilitate a simple, rapid monocyte activation test that can detect a wide range of pyrogens
Citation: Nanao T, Marutani Y, Sato K, Mori T, Kitagawa T, Oku T, et al. (2025) NOMO-1 cells expressing an NF-κB luciferase reporter gene facilitate a simple, rapid monocyte activation test that can detect a wide range of pyrogens. PLoS One 20(6): e0326408. https://doi.org/10.1371/journal.pone.0326408 Editor: Rui Tada, Tokyo University of Pharmacy and Life Sciences: Tokyo Yakka Daigaku, JAPAN Received: May 31, 2024; Accepted: May 29, 2025; Published: June 20, 2025 Copyright: © 2025 Nanao et al.
Alternative Anticoagulant Strategy to Improve the Test Sensitivity of ASTM F2888‐19 Standard for Platelet and Leukocyte Count Assay
Conflicts of Interest The authors declare no conflicts of interest. Supporting Information Filename Description jbmb35514-sup-0001-Supinfo.docxWord 2007 document , 545.1 KB Data S1. References 1 and , “Bleeding and Thrombosis in Patients With Continuous-Flow Ventricular Assist Devices,” Circulation 125, no. 24 (2012): 3038–3047.
Accelerated In Vitro Oxidative Degradation Testing of Ultra‐High Molecular Weight Polyethylene (UHMWPE)
Conflicts of Interest The authors declare that they have no conflicts of interest regarding this work. Supporting Information Filename Description jbmb35495-sup-0001-Supinfo.docxWord 2007 document , 1.8 MB Data S1. References 1 and , “Modulation of the Wound Healing Response Through Oxidation Active Materials,” Engineering Biomaterials for Regenerative Medicine: Novel Technologies for Clinical Applications (2012): 161–192, https://doi.org/10.1007/978-1-4614-1080-5_7/COVER.
AI and machine learning in medical imaging: key points from development to translation
The rise of AI for medical imaging has sparked concerns about the potential obsolescence of radiology as a profession. This commentary paper seeks to provide a more balanced perspective on the near-future role of AI in clinical radiology and explores the challenges in AI development and implementation despite proliferation of AI systems. Prior to the early 2000s, limited data sets, insufficient computational power, and siloed research groups hindered progress (Figure 1).
Estimating Recovery in the Evaporation Chemical Space - Biomedical Materials & Devices
Abstract Evaporation is a commonly used extract preparation technique in chemical characterization testing which can greatly impact the observed extractables. Although ideally only solvent is removed and the analytes remain, in practice the analytes evaporate as well, and these losses must be considered when addressing the appropriateness of evaporation as an extract preparation method.
Artificial intelligence in medicine: mitigating risks and maximizing benefits via quality assurance, quality control, and acceptance testing
Artificial intelligence (AI) tools have the potential to revolutionize all aspects of medicine, from decision support in diagnosis to workflow management, drug discovery, and across the entire imaging chain in radiology.
Training pathologists to assess stromal tumour‐infiltrating lymphocytes in breast cancer synergises efforts in clinical care and scientific research
|
By Amy Ly, Victor Garcia, Victor García Verified, Víctor García, Engineering Laboratories, Anna Ehinger
|
Wiley Online Library
Verified
Conflicts of interest A.L.: consultant: Ultivue. R.S.: advisory board/consultancy: B.M.S., Exact Sciences, Roche, Owkin; research funding: Roche, Puma, Merck. K.R.M.B.: research funding: SimbioSys, Carevive. K.A.W.: employee/equity holder: Roche Diagnostics Solutions former employee/equity holder, Ultivue, Leica Biosystems/Danaher, Novartis. D.J.E.P.: consultant pathologist: CellCarta NV.
Physico-chemical characterization of food grade natural spring salt from the Central Anatolia region of Turkey and investigation of its microplastic content | Journal of Food Science and Technology
Abstract Delice salt is a natural spring salt obtained from the evaporation of spring water from the Central Anatolia region of Turkey and is a food grade salt with a geographical indication certificate. The aim of this study was to evaluate the compliance of Delice natural spring salt (Delice NSS), a commercial product, with food grade criteria by physicochemical characterizations and to investigate whether it contains microplastics.
Influence of titanium nanoscale surface roughness on fibrinogen and albumin protein adsorption kinetics and platelet responses
CONFLICT OF INTEREST STATEMENT There is no conflict of interest to declare. Supporting Information Filename Description jbma37635-sup-0001-Supinfo.docxWord 2007 document , 174 KB Data S1. Supporting information. REFERENCES 1, , , et al. Current advances in nanocarriers for biomedical research and their applications. Artif Cells Nanomed Biotechnol. 2018; 46(sup2): 1053-1062. 2, , , et al. Graphene-based nanomaterials for drug and/or gene delivery, bioimaging, and tissue engineering. Drug Discov Today.
Influence of titanium nanoscale surface roughness on fibrinogen and albumin protein adsorption kinetics and platelet responses
CONFLICT OF INTEREST STATEMENT There is no conflict of interest to declare. Supporting Information Filename Description jbma37635-sup-0001-Supinfo.docxWord 2007 document , 174 KB Data S1. Supporting information. REFERENCES 1, , , et al. Current advances in nanocarriers for biomedical research and their applications. Artif Cells Nanomed Biotechnol. 2018; 46(sup2): 1053-1062. 2, , , et al. Graphene-based nanomaterials for drug and/or gene delivery, bioimaging, and tissue engineering. Drug Discov Today.
Initial interactions with the FDA on developing a validation dataset as a medical device development tool
Introduction Here we discuss efforts to create a dataset to validate a computational model based on data from digital pathology whole slide images (WSIs) [1] for consideration of qualification as a Medical Device Development Tool (MDDT) [2]. Specifically, we discuss feedback from the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA) on our initial interaction with the MDDT program.
Structural analysis of platelet fragments and extracellular vesicles produced by apheresis platelets during storage
Subjects: Platelets and Thrombopoiesis, Thrombosis and Hemostasis, Vascular Biology Subjects: Platelets and Thrombopoiesis, Thrombosis and Hemostasis, Vascular Biology Subjects: Platelets and Thrombopoiesis, Thrombosis and Hemostasis, Vascular Biology Apheresis platelets (PLTs) can be stored for 7 days at ambient temperatures, in a range from 20 to 24°C, under constant gentle agitation,1 conditions that lead to PLT storage lesion (PSL).
EEG classification of traumatic brain injury and stroke from a nonspecific population using neural networks
Featureless deep learning models. A series of deep learning models were also trained using a downsampled (100 Hz) EEG segment or associated measures as input instead of a feature vector. They are detailed below. Topographic Map Network (TMN): Using a topographic map representing the change in relative PSD at each EEG channel location on the head and an interpolation across the scalp, we designed the Topographic Map Network (TNM) (Fig 4).
Reproducibility in Modeling and Simulation of the Knee: Academic, Industry, and Regulatory Perspectives
REVIEW Original article for submission to the Journal of Orthopaedic Research summarizing the Workshop held at the 2019 Annual Meeting of the Orthopaedic Research Society This article has been accepted for publication and undergone full peer review but has not been through the copyediting, typesetting, pagination and proofreading process, which may lead to differences between this version and the Version of Record.
Validation framework for epidemiological models with application to COVID-19 models
Loading metrics Open Access Peer-reviewed Research Article Abstract Mathematical models have been an important tool during the COVID-19 pandemic, for example to predict demand of critical resources such as medical devices, personal protective equipment and diagnostic tests. Many COVID-19 models have been developed. However, there is relatively little information available regarding reliability of model predictions.
identification and mitigation of potential biases in the roadmap from data collection to model deployment
1. Introduction Artificial intelligence and machine learning (AI/ML) in medical imaging provide important methods for leveraging large amounts of data to build models to detect disease and provide diagnosis, prognosis, and risk assessment tools to support decision-making in medicine. The development and deployment of AI/ML models in a wide variety of fields have grown substantially in the past decade, broadening considerations for more careful evaluation of the algorithms.
Characterization of aerosols generated by high-power electronic nicotine delivery systems (ENDS): Influence of atomizer, temperature and PG:VG ratios
Loading metrics Open Access Peer-reviewed Research Article Abstract The aerosol characteristics of electronic nicotine delivery systems (ENDS) are important parameters in predicting health outcomes since parameters such as aerosol particle size correlate strongly to aerosol delivery and deposition efficiency. However, many studies to date do not account for aerosol aging, which may affect the measurement of ultra-fine particles that typically coagulate or agglomerate during puff development.
Construction and validation of UV-C decontamination cabinets for filtering facepiece respirators: comment
Abstract In their September 2020 paper [Appl. Opt. 59, 7585 (2020) [CrossRef] ], Purschke et al. report UV-C transmittance measurements of N95 filtering facepiece respirators (FFRs), including the 3M 1860, which is one of the most widely used FFRs. We have also measured the transmittance of this FFR in our two separate laboratories with multiple FFR samples, and we have obtained transmittance values similar to one another, but very different from what Purschke et al.
Accuracy assessment methods for physiological model selection toward evaluation of closed-loop controlled medical devices
Loading metrics Open Access Peer-reviewed Research Article Ramin Bighamian , Jin-Oh Hahn, George Kramer, Christopher Scully Ramin Bighamian, Jin-Oh Hahn, George Kramer, Christopher Scully Published: April 30, 2021 https://doi.org/10.1371/journal.pone.0251001 Figures Abstract Physiological closed-loop controlled (PCLC) medical devices are complex systems integrating one or more medical devices with a patient’s physiology through closed-loop control algorithms; introducing many failure modes...
Quantifying Signal Quality From Unimodal and Multimodal Sources: Application to EEG With Ocular and Motion Artifacts
1. Introduction Advancements in and availability of wearable technologies that can readily collect electrophysiological data from individuals in both controlled laboratory and real-world settings have been growing rapidly. As such, both the volume of available biometric data and its potential utility, if properly understood, are also increasing. If these data are to be effectively applied and correctly interpreted, it is important to understand the quality of data being recorded.
Application of machine learning to the identification of joint degrees of freedom involved in abnormal movement during upper limb prosthesis use
Loading metrics Open Access Peer-reviewed Research Article Sophie L. Wang, Conor Bloomer, Gene Civillico, Kimberly Kontson Sophie L. Wang, Conor Bloomer, Gene Civillico, Kimberly Kontson Published: February 11, 2021 https://doi.org/10.1371/journal.pone.0246795 Figures Abstract To evaluate movement quality of upper limb (UL) prosthesis users, performance-based outcome measures have been developed that examine the normalcy of movement as compared to a person with a sound, intact hand.
Larger surface area can reduce nitinol corrosion resistance
Abstract Surface area has long been thought to influence the corrosion behavior of medical devices although this phenomenon has not been systematically investigated. Because many nitinol implants are offered in a range of sizes, understanding the influence of device surface area on corrosion susceptibility is key to ensuring nitinol devices are safe.
Erratum: Cytotoxicity, cellular uptake and apoptotic responses in human coronary artery endothelial cells exposed to ultrasmall superparamagnetic iron oxide nanoparticles
ERRATUM Peter L. Goering Corresponding Author E-mail address: peter.goering@fda.hhs.gov https://orcid.org/0000-0003-3335-2208 Division of Biology, Chemistry, and Materials Science, Office of Science and Engineering Laboratories, Center for Devices and Radiological Health US Food and Drug Administration, Silver Spring, Maryland, USA Search for more papers by this author The following disclaimer was erroneously omitted during production of the article by Palacios‐Hernandez et al.
International Multisite Study of Human-Induced Pluripotent Stem Cell-Derived Cardiomyocytes for Drug Proarrhythmic Potential Assessment
To assess the utility of human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) as an in vitro proarrhythmia model, we evaluated the concentration dependence and sources of variability of electrophysiologic responses to 28 drugs linked to low, intermediate, and high torsades de pointes (TdP) risk categories using two commercial cell lines and standardized protocols in a blinded multisite study using multielectrode array or voltage-sensing optical approaches.
Optimized generation of high-resolution phantom images using cGAN: Application to quantification of Ki67 breast cancer images
In pathology, Immunohistochemical staining (IHC) of tissue sections is regularly used to diagnose and grade malignant tumors. Typically, IHC stain interpretation is rendered by a trained pathologist using a manual method, which consists of counting each positively- and negatively-stained cell under a microscope. The manual enumeration suffers from poor reproducibility even in the hands of expert pathologists.
A Novel In Vitro Testing Approach for the Next Generation of Transvenous Cardiac Leads: Buckling Behavior
Manufacturers are constantly seeking to design new, better performing transvenous cardiac leads to prevent perforation of the heart by the lead tip. Currently, there is no standardized test method to measure the buckling load of leads, a major factor in the propensity of the lead to perforate the heart.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Engineering
Contact Engineering, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack