I need to keep my studio organized and looking clean. I prefer to build rolly carts that I can move around and use as needed depending on the projects that I undertake. I have built carts for my 3D printers and those serve me well. I will use MDF material to build the carts, the drawers for these carts. I built a short printer cart for my printer and the supplies for it, as well as a tool cart for my office supplies and plastic organizer cases for small parts.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Eric Strebel
Magnetic Molds: A Clever Way To Make Casting Easier
I finally got around to using my Magnetic mold box system to mold some parts. I originally made a video about the magnetic system in 2020 The mold box uses magnets to hold itself together. The magical magnetic system makes molding so much easier, no hot glue, no rubber bands, no screws. This makes the molding process so much easier and fun, as well as saving you time. The video shows the process of molding some 3D printed parts for an industrial project.
Making An Open Face Silicone Mold
This week’s video is about making a silicone mold for a 3D printed electromagnetic coil ring retainer. I 3D print a coil ring retainer from the CAD data supplied by my client.Next, I use the 3D printed part as the master part to make a silicone mold. Once the silicone mold has cured.Then I test cast a part in the mold to make sure the mold is free from defects. Once the part is cured, I trim the piece flush.
Epoxy VS Urethane Resin Comparison With Mold Making
My latest video is about comparing Epoxy resin to Urethane resin. I duplicate a battery door cover and my client has requested the part to be cast out of Epoxy resin. I go over how I make a three piece silicone mold of the part. There is an undercut snap tab on the part and it requires a small removable part to be added to the mold. This is a useful feature to have to ensure your mold does not rip part way through your project, and so you get consistent high quality parts.
Intro To Industrial Sewing Machines
Did you know that you can buy an Industrial Sewing machine for $300-$400 on CraigsList? That’s right, a heavy duty machine that can sew through most heavy duty materials, including leather with ease. You will need to do a few things with the machine before you can use it for your projects however.
Pulp Molding: How to Make Your Material
This week’s video is the fourth in the series about prototyping a proof of concept eco-friendly pulp molded wireless charger. This video follows the process of chopping up corrugated cardboard to produce the pulp slurry that is needed to make the fiber molded charging stand. The chopped fibers are suspended in a large container of water and the mold is drawn through the mixture to catch the fibers that are caught on the brass wire mesh mold.
Eco Friendly Prototypes with Pulp Molding: Building A Mold
On the journey to make an eco-friendly wireless phone charger, I need to make a wire screen mold. I build a brass screen mold using 3D printed molds. The 3D printed parts act as a guide to help form and shape the brass screen. The brass screen can be cut with scissors and then I solder the parts together to form the different sections of the mold. . Ultimately, all the parts are mounted into a frame that is also made of brass bar stock.
Eco Friendly Prototypes With Pulp Molding: Designing The Mold
This latest video is about building a prototype for an eco-friendly wireless pulp molded cell phone holder I am designing. The product is meant to have a minimal impact on the environment and thus is designed to be manufactured out of recycled paper fibers, just like the egg cartons in your refrigerator. This is the second video in the Wireless charging build series.
Using Gesso To Prime Your Parts Cheaply
3D Printing & Imaging Craft & Design Maker News Have you ever wondered if there is an alternative to spray can primer? I explore using acrylic gesso medium as a primer on some urethane modeling foam. Not everyone has a spray booth to spray lacquer based paint or 2K urethane primer. So, what are alternatives if you can’t spray paint? I brush layers of Gesso onto my object to build up the layers, then I dry sand them to get it to a 600 grit finish so it can be top coated with the finish of my choice.
How To Mold A Collapsible Container
My latest video is a follow up to a popular video about making a collapsible silicone container. Previously I took 25 attempts at making a collapsible container molded in the upright position. In this video I attempt the same container molded in the collapsed position. Turns out this way of making a collapsible container is much easier than in the extended position.
Karim Rashid on Design Losing Ground as a Respected Profession - Core77
Yesterday Karim Rashid posted this 8-minute walk-and-talk, where he brings up some topics you rarely hear about: An oversaturation of design schools and designers, a high number of designers willing to work for little or free, and the effect that's having on the overall business model whereby someone pays you to add value to their product or process. If it wasn't COVID times, I'd say watch this video, then let's meet up at the bar to discuss.
How To "Over-Mold" Clear Parts
This week’s video is about creating a flexible over-molded polyurethane clear acrylic lid using a four part 3D printed mold. I start by creating a 3D printed self locking 4 part PLA mold. I laser cut my acrylic with some teeth and holes in the edges for the Polyurethane to bond with.
Use A Treadmill Motor To Seriously Upgrade Your Drill Press
How to upgrade an old drill press with a brushless 2.6Hp DC motor from a treadmill.This modification has many advantages, more horsepower, speed control and reverse of course, because every drill press needs a reverse! I cover the process of building a new motor mount bracket out of an old office chair. Next I grind down the old motor shaft so I can reuse the pulleys.
Advanced Techniques For Prototyping With Wood
My new video is the second video in the wood model making series. This one is a bit more advanced than the previous basic wood model making video. In this video I cover building a sketch model of a wooden bench with a more advanced laminated plywood extruded shape. For this video I cover steam bending wood and a very brief history of when the practice started. I discuss different types of wood to use, and showcase different ways to steam bend various wood species.
Tips And Tricks For Basic Wooden Model Making
Today, you have access to two types of wood from your local hobby store, Bass wood and traditional Balsa wood. Both have advantages and disadvantages depending on what you are trying to accomplish with your project. I cover the two main types of cutting tools that you would use for making wood models, x-acto blade and a hand saw with a mitre box.
How 2 Part Primer In A Rattle Can Makes Props Look Great
This week’s video is about a new technology that puts a two component, solvent resistant primer in a can. Yes, a rattle can! Previously if you wanted a professional two part primer you needed to mix it by hand and load it in a spray gun. This is messy, time consuming and a lot of extra work. Now you can buy a can, activate and spray. Once activated it can be used for up to 24 hours.The two part mixture sets in two hours and is ready for sanding.
Tips For Making A Large Silicone Mold
Have you ever wondered how to make a large silicone mold of something big? It takes a lot of prep and planning, but the results are worth it. I show step by step how to make a 13″x19″/33cmx50cm mold with a self sealing laser cut key. The two part mold is constructed with over 5gal/19L of silicone material around the original part. I detail how to secure the original part to it’s platform and line it up in the mold box correctly.
How To Make Perfect Copies of Objects By Casting Them In Resin
Perhaps you have wondered how to make a copy of a simple object or how to make multiple duplicates of something for a project you are working on. This week’s video details how to duplicate a simple 3D object. Follow along with the setup of making a two part silicone mold and then casting that part with resin to make a copy of the original. In the video I break down the process of molding a violin chin rest.
Acrylic Tips And Tricks For Designers, Architects, & Makers
Art & Sculpture Craft & Design Workshop Acrylic Basics is the 1st of a series of videos that will show you 3 different ways to build models with sheets of acrylic. Covered in this video are the basics, how to cut the acrylic by using either a band saw, score & snap with a hand tool and a table saw. Also covered are the different types of acrylic and how to bond acrylic together.
Vibration Casting: How to Get Air Bubbles Out of Resin, Without Using a Pressure Tank - Core77
In the quest to produce more perfect resin castings, industrial designer Eric Strebel observed how folks who work with concrete and plaster get the bubbles out of their mixtures. He then came up with the idea of vibration casting, and spoke with the lead chemist and a manager at BJB Enterprises, a manufacturer of polyurethane resin, to confirm he was on the right track.
The Sound Produced by a Rivian Electric Delivery Van is God-Awful! - Core77
This would drive me absolutely nuts. In L.A. a YouTuber spotted one of Amazon's new Rivian electric delivery vans, and the whining drone it makes has to be heard to be believed: Enter a caption (optional) I mean it started out medium-annoying, but as the vehicle begins to move, the pitch increase sounds like an audio cue inspiring dread in a horror movie.
The Ford F-150's New Design Tricks: Fold-Out Work Surface, Lie-Flat Seats, Tailgate Workbench - Core77
Ford has done something unusual with the just-announced 2021 F-150: They went with a new exterior design that looks much the same as the last design. In other words, they undertook the expense of re-tooling for all-new body panels, yet did not gain the benefit of a fresh look. That has me scratching my head, and I'm guessing the exterior designers were frustrated. The interior designers, however, got a chance to shine.
PumPix: A Wearable That Shoots Sanitizer Out of Your Wrists Like Spider-Man's Webs - Core77
So this is hilarious. The PumPix is a wrist-mounted device that you load with hand sanitizer, and then you can squirt it from your wrists at will, like Spider-Man's webs. The thinking is that you'd spray it not only on your hands, but directly onto whatever object you're about to touch. I'm not sure how much sense that makes if you're not going to wipe the object down. My doubts aside, the PumPix has already been successfully Kickstarted.
Elon Musk Explains the Manufacturing Reason Why the Cybertruck is All Flat Planes
All jokes aside, the Tesla Cybertruck has racked up roughly 187,000 orders since its launch last week. (Truth be told, my wife and I are discussing whether we'll add ourselves to the order list, but I'll get into that in another entry.) And now a design detail that we'd have preferred to hear during the launch presentation has come to light.
Backpack Hanger Mockup Build: Using Matboard to Simulate Folded Sheet Metal Parts - Core77
"In product design, the importance of building mockups and simple prototypes cannot be underestimated," writes industrial designer Eric Strebel. "The knowledge gained from the exercise, to touch, hold and use the object in real life, is legitimately worth the time invested." "Seeing what you learned from a mockup gives you a leg up in the development process before you get to CAD.
Apple Releases Online Tool That Lets You See What Data They've Collected On You - Core77
I've pretty much accepted that if I discuss something out loud, ads start popping up for that thing when I go online. If I tell you that I think my phone is listening to me, I sound like a crazy person. So I have no explanation as to how this happens. Apple wants to assure you that they're not surreptitiously collecting data on you, that private things like your call log, heart rate and browsing habits are not stored on their servers.
Women's Pockets Really Suck - Core77
Last month at the DMV, I was switching my driver's license over to my new state of residence. The clerk showed me a screen where I could double-check my data, and I saw that she had accidentally listed my gender as female. "Can you backspace over that," I asked, "or do I have to get the operation?" Aside from said operation, I think the biggest hassle of switching from male to female would be adjusting to women's clothes. Especially the lack of carrying space.
Thinking of Chefs as Athletes to Create High-Performance Chefwear
Ever seen Chef's Table on Netflix? If you have, then you have an idea of how crazy a professional kitchen is. Chef's all around the world spend 8+ hours in kitchens, running, stretching, lifting objects in extreme heated conditions. Professional cooking is active, but what about chefwear? It is NOT. What if we reimagined professional cooking as a sport, and design chefwear, like sportswear, so chefs can perform with high efficiency and comfort throughout their day?
Better Butter Dispensing - Core77
You’ve made something you truly believe in. You’d love to let the rest of the world know... NOW wHat? I'm skeptical of kitchen gadgets in general, but this one seems genuinely useful, at least if you're a frequent consumer of butter. Most of us store butter in a butter dish, and cut slices off of it with a knife. If you refrigerate your butter (a Northeastern America thing?
Volkswagen's New California Camper Van is Packed With Utilitarian Design Features - Core77
Volkswagen's designers and engineers look like they had an absolute field day with their new California Camper van. They've loaded this relatively diminutive vehicle with built-in furniture, pop-out standalone furniture, two beds, a kitchen, an outdoor shower and more. It's not even the features themselves that most impress me, it's the way that everything has been designed to cleanly integrate with the structure, such that everything is invisible until the user chooses to reveal them.
How to Rejuvenate an Old X-Acto Knife
As industrial designers we both use tools and appreciate objects on an emotional level, so it's not surprising that we become attached to tools. When Eric Strebel's decades-old, favorite X-Acto knife looked like it was going to give up the ghost, he worked up a quick fix with copper, beautifying the tool in the process:Enter a caption (optional)Enter a caption (optional)Enter a caption (optional)Enter a caption (optional)VIDEOEnter a caption (optional) The latest design news, jobs & events.
Product Design in Practice: Mobile Solar Charger Prototype
We’re back! If you’re familiar with some of my other projects or subscribe to my YouTube channel, you’ll notice two new videos. Those are the the first of an eight part video series on building product prototypes. The series captures the process of creating a working prototype for a solar charger power bank – The Solar Vox Ultra. (Nice name, huh?) We’ll go over the design process I follow to design and refine the concept into the final product and build a working prototype of the device.
How to Make a Glow in the Dark Car Vehicle Antenna
I was having a tough time finding my white car occasionally. I wanted to remedy that situation by having an antenna that was unique and stood out in a crowd. I settled on a Glow option as it would be a lighter color than other vehicles and “of course” glows in the dark! I started by simply unscrewing and removing the antenna from the vehicle so I could work on it. First, I lightly sanded the antenna so I could prep it for the adhesion promoter.
How I Built an Ultra Quiet Shop Compressor from Refrigerator Parts
I needed to build a very quiet, high-capacity compressor for making ID models and prototypes in my shop. The one I have is quite loud and doesn’t have the capacity I was comfortable with for urethane casting work. I sourced a 6-gallon air tank on eBay for $35, including shipping, from a fellow in Indiana. Next, I needed a refrigerator compressor. Why use a refrigerator compressor?
Adventure Toy Rendering Series - Part THREE: Vehicles
Vehicles concepts fall into a category all of their own. They are different than other products in the sense that they are, in general, 95% styling and about 1% design, with 4% common sense/luck, in my opinion. Toy vehicles are usually some sort of a generalization of what a designer thinks a vehicle is and what the manufacturing process will allow them to produce. The concept vehicles for the these episodes are unique in the sense that they are atypical of kids free-play exploring adventure toys.
2-Day Model Making Workshop at Botzen Design Studio
Botzen Design Studio will have a 2-day, hands-on Model Making Workshop Saturday, June 25 – Sunday, June 26th. It all happens at the Botzen Design Studio in Southfield, Michigan (northwest Detroit). The focus is on real world techniques of building, modelling, surfacing and finishing relevant to designers and makers of various disciplines.
Design World Outraged By Frond Font Affront
Last week the U.S. Navy undertook a rescue mission, recovering three men who had been stranded on a desert island. The unlucky trio had set sail from Pulap, an atoll in the Federated States of Micronesia, and their boat was reportedly capsized by a large wave. The men swam overnight until they miraculously reached Fanadik, a deserted island. After spelling out "HELP" in the sand using palm fronds, they managed to be seen by a Navy spotter plane, and the men were subsequently rescued.
Punkt's Retro-Function MP 01 Cell Phone
Your American correspondent noticed something astonishing in Nuremberg. Each night after Holz-Handwerk I'd repair to a local café or restaurant, all of which were crowded at that hour. Among all of the patrons, not a single one was staring into their phone or photographing their food. They were all actually talking to each other and eating the food, and if they had smartphones, they remained out of sight.
How They Sorted Mail in 1903
You probably have an inkling that modern-day mail is sorted by machines. But back in 1903, it had to be done by guys named Ralph or Wesley. They had a lot of letters to sort, and they had to do it quickly—so this is the "system" the U.S. Post Office Department came up with.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Eric
Contact Eric, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack