During the late, great Les Nelson’s last AHR conference in Chicago back in 2018, he asked me what our hydronics industry needed the most. He was on a mission to increase the visibility of the Radiant Professionals Alliance and give the industry something that it could really use. At the time, I was the service manager for a large hydronic concern here in Colorado. We had just replaced a bunch of mechanical equipment on a large complex that had failed within its warranty coverage period.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Mark Eatherton
What a long strange trip it’s been…
ehrlif / iStock / Getty Images Plus I’ve had a chance to think about where I’ve been, and where I am going in the next few years. Mark Eatherton | Sep 11, 2019 (Credit to the Grateful Dead for those words.) Register to view the full article Registration on Contractor allows you exclusive access to high value content centered around proprietary research, expert analysis, and in-depth technical procedures. Related
Boiler Replacement Opportunities - Part 3
iStock / Getty Images Plus Remember, conservation in any form is less expensive than physical plant, and may end up in a decrease in the required driving forces. Mark Eatherton | May 17, 2019 Click here for Part 1, and here for Part 2 of the series. Register to view the full article Registration on Contractor allows you exclusive access to high value content centered around proprietary research, expert analysis, and in-depth technical procedures. Related
Boiler Replacement Opportunities - Part 2
caifas / iStock / Getty Images Plus I generally start my review in the mechanical room by focusing on what is there and how it operates. Mark Eatherton | Apr 17, 2019 The process of heating system replacement begins with a complete and thorough review of not just the boiler room and its components, but also the distribution system, the buildings control systems, and interviews with some of the buildings occupants and operators (management).
Boiler Replacement Opportunities
The “state of the art” heating systems at the time were appliances with a basic thermal efficiency of around 60 to 80 percent. Mark Eatherton | Mar 20, 2019 The HUD (Housing and Urban Development) organization was developed by the federal government in 1965 to assist in the development of low income and subsidized housing for seniors, veterans and the financially disadvantaged. It began developing housing in multi-family, multiple story buildings throughout the United States.
Challenges in DHW distribution - Part 3
imantsu / iStock / Getty Images Plus This is the third and final part of a three-article series addressing the problems associated with DHW recirculation systems. Mark Eatherton | Feb 13, 2019 This is the third and final part of a three-article series addressing the problems associated with DHW recirculation systems that cause pipe and fitting failures in the field. You can read part 1 here, and part 2 here.
Challenges in DHW Distribution - Part 2
primeimages / :iStock / Getty Images Plus The appearance of flux corrosion differs from HEC (hydraulic erosion corrosion) in that there are less U-shaped signs than random holes in the piping system. Mark Eatherton | Jan 22, 2019 This is a continuation of an article started in the December 2018 column addressing the many circulatory problems associated with older, multi-story buildings.
Comfort vs. efficiency in energy efficiency
As the chairman of the RPA Technical Committee, I try to stay abreast of situations that may affect our working members. One such area is the movement toward energy efficiency. I’ve been involved in the construction trades for 43 years this summer and I must tell you I have seen a lot of things come and go, many of which were touted as being the “best” energy-saving devices.
Challenges in DHW Distribution - Part 1
baona / iStock / Getty Images Plus Some cross-connection problems can be masked by other problems common to large, DHW distribution systems. Mark Eatherton | Dec 19, 2018 Over the years, I have addressed some of the many problems associated with large, multi-story apartment buildings DHW production and distribution systems.
Wood Flooring and Radiant Heat - Part 2
The new NWFA standard calls out the need for in-floor or under-floor data loggers.
Wood Flooring and Radiant Heat - Part 1
As the chairperson for the Radiant Professionals Alliance’ Technical Committee, I am charged with being involved in any technical developments of codes or standards affecting our members. Within the last year, I was approached by members of the National Wood Flooring Association (NWFA) in regards to developing a standard which they were in the process of developing to limit the operating temperatures of radiant floors covered by wood flooring materials. We (the RPA and NWFA) had been
Coming Full Circle
When I first began writing for Contractor Magazine around 22 years ago, I was employed by what I consider one of the best hydronic contractors in the world, that being Advanced Hydronics, Inc. I helped to grow the firm from its infancy, back when it was just the owner, Tom Olds, and his sole employee, Nathan Burtz. Many of my stories and ideas for articles come from my experiences at AHI.
A Day in the Life of... (Continued)
At the end of last month’s article, I’d mentioned that I’d be spending a day with a top- notch hydronics/HVAC equipment service technician. I was honored to spend the day working with a young technician by the name of Oscar Varela. Oscar works for Advanced Hydronics, Inc. in Denver Colorado. Advanced Hydronics, Inc. is a specialty contracting firm specializing in hydronic based, radiant driven comfort systems.
Comfort vs. efficiency
As the chairman of the RPA Technical committee, I try to stay abreast of situations that may affect our working members. One such area is the movement towards energy efficiency.I’ve been involved in the construction trades for 43 years this summer, and I must tell you that I have seen a lot of things come and go, many of which were touted as being the “best” energy saving devices.
Comfort vs. efficiency
As the chairman of the RPA Technical committee, I try to stay abreast of situations that may affect our working members. One such area is the movement towards energy efficiency.I’ve been involved in the construction trades for 43 years this summer, and I must tell you that I have seen a lot of things come and go, many of which were touted as being the “best” energy saving devices.
Comfort vs. efficiency
As the chairman of the RPA Technical committee, I try to stay abreast of situations that may affect our working members. One such area is the movement towards energy efficiency.I’ve been involved in the construction trades for 43 years this summer, and I must tell you that I have seen a lot of things come and go, many of which were touted as being the “best” energy saving devices.
Comfort vs. efficiency
As the chairman of the RPA Technical committee, I try to stay abreast of situations that may affect our working members. One such area is the movement towards energy efficiency.I’ve been involved in the construction trades for 43 years this summer, and I must tell you that I have seen a lot of things come and go, many of which were touted as being the “best” energy saving devices.
Commissioning Hydronic Systems, Part 4
In this, the final article on commissioning, we will discuss the other parameters in need of testing and documentation.
Commissioning hydronic systems, Part 3
In my last article we’d started to look at the instruments necessary for setting up the boiler. Today’s boilers are extremely sophisticated, and require the use of a combustion flue gas analyzer in order to properly set them up to ensure proper operation. The good ol’ days of a bang bang boiler (either on or off) are long gone. Today’s boilers come with
Commissioning hydronic systems, Part 2
On my last article (April 2018) I explained that we’d go into depth to discuss the proper commissioning of some of our newer hydronic heating systems. Suffice to say, there are no less than a 1000 different ways to do a system, but they all contain the same basic equipment. From the heat source side, the “boiler” could be something as simple as an atmospheric fired boiler, or as complicated as a Ground Source Heat Pump system. Regardless of what it is and where it is located
Commissioning hydronic systems, Part 1
When I first started in this business 40 some years ago, our equipment selections and system designs were much simpler. A typical residential system entailed a boiler, a pump and 3 to 4 zone valves connected to hot water base board convectors. No outdoor resets, no modulating capabilities and the pumps for the most part were single speed. Nice and simple.
Are you controlling pipe growth potential or is it controlling you?
With the ASSE 19210 Hydronic System Installation Standard, I helped address the coefficients of expansion and contraction in hydronic piping.
Important conversations to be had — Pt. 2
This is a continuation of last month’s article, “Important conversations to be had — Pt. 1” http://bit.ly/2qtxeL7, about meeting the consumer’s wishes, wants, needs and expectation as it pertains to their comfort delivery system. Popular Now2016 Book of Giants: One Giant Step for...Sizing mini split systems — Don’t oversize, choose the right equipmentVacuum Breakers: Understanding how they protect our water This also brings up the subject of programmable ...
Important conversations that never happen, but should — Pt. 1
As a professional comfort contractor, most people understand the need to listen to the consumer. You have two ears and only one mouth. Listen to the consumer to find out what their wishes, wants, needs and expectations are before you speak. I say this, because I have been practicing this method for most of my 40 years in this business. If we start talking first, we are assuming a lot of information that will lead to a dissatisfied, uncomfortable customer.
Reduce your energy consumption for heating domestic hot water by 50 percent
There are actually a lot of ways to reduce energy consumption related to the production of domestic hot water. Setting of a reasonably sized solar preheat system is one excellent way. You will spend between $10,000 and $20,000 to achieve that goal. Granted, there is a decent tax credit to help defer the initial installation costs, but with energy being as cheap as it currently is, the return on the investment is still rather long, with no guarantees of reaching pay back before the system ...
Radiant solutions and the beginning of a new age‌
As many of my regular readers know, I have stepped down as the Executive Director of the RPA, effective April 1. I want my fellow hydronics contractors to know that I fully intend to stay involved with this organization. It’s really the only game in town. I have offered to stay on as a volunteer to chair the Technical Committee. As I have stated in the past, if you aren’t a member, please consider joining.
Notable achievements and changes too
“The only thing that is constant is change...” Heraclitus, philosopher, 475 B.C. As I enter into the fifth year of my career with the Radiant Professionals Alliance (RPA), and I look back at all of the work and accomplishments, most of which were done by a great group of volunteers, I feel a great deal of pride in knowing that we, as an industry have become stronger today than we were when I first joined the RPA. Popular NowExpansion Tanks 101: pressure and air ventsWhat’s in a ...
Inadvertent code violation
For many years, there has been a practice in the field of hydronics of taking a code-compliant, dual-use, tank-style water heater and using it for both domestic hot water (DHW) and space heating by circulating the hot water through radiant floor heating circuits. From the outset, as a master plumber charged with protecting the health of the nation, I have been opposed to this design. And quite frankly, I, along with other well-known industry experts, have gone before code development bodies ...
Looking back on the year
As we close in on the end of the year, I’d like to look back at what has happened during the last year, and thank those responsible for their assistance. Popular NowBuilding from the ground up: Aquatherm North America’s new home5 Tips to make the most of KBIS 2017Expansion Tanks 101: pressure and air vents /** block-quote styles **/ .pquote { background: url("http://www.industryweek.com/site-files/industryweek.com/files/uploads/2014/08/openquote-iw.png") ...
System fluid volume revisited
As winter approaches, the task of estimating the volume of fluid in a given hydronic system rears its head once again, and many questions about how to properly estimate or calculate the volume of fluid in a given system begin flying around. With many hydronic equipment manufacturers demanding water quality knowledge and treatment in order to provide proper equipment warranty, this timely article will help those people in the field understand their options. Popular NowThe world is 3D so ...
K.I.S.S. — Keep it sweetly simple
Many people have their own interpretation of this acronym. Some say Keep It Simple Stupid. I prefer one I developed, which is Keep It Sweetly Simple. A perfect fit for hydronics. Popular NowMacDonald-Miller Facility Solutions’ launches wearable technology platform Augury unveils OEM partnership program for industrial IoTSolar Choices /** block-quote styles **/ .pquote { background: url("http://www.industryweek.com/site-files/industryweek.com/files/uploads/2014/08/openquote-iw.png") ...
Difference between circulators, pumps
Many industries suffer some of the same problems that our industry does when it comes to the jargon used by its tradesmen. Acronyms make it even more difficult in most cases, because when people don’t know or understand, they make things up. For example, PRV — is it a pressure-reducing valve or a pressure-relief valve? There’s a big difference between the two. One area of concern for hydronics folk is the use of the term “pump” versus “circulator.” Visually, they are one and the same.
So you think you know radiant eh‌.
I talk to people on a daily basis about radiant heating and radiant cooling systems. Many people have a fairly good grasp on the basics of radiant. Some even think that if you load up a joist bay with as much tubing as you can stuff in there that it will work. Maybe yes, maybe no. Having been in the consulting business prior to taking my position with the Radiant Professionals Alliance (RPA), I saw many jobs where the physical plant and the distribution systems didn’t have parity. ...
Non solid state control strategies, Pt. 2
In last month’s article, we began to rediscover non-electric thermostatic radiator valves (TRV). In this month’s article, we complete that examination. It is a “set it and forget it” type of thermostat, and the final setting is dependent upon all of the usual variables associated with determining final degrees of comfort. Are the occupants heavily clothed or lightly clothed; are they active or are they inactive; and what is their proximity to large areas of glazing. ...
Plumbing and Mechanical
Education is always a big draw for contractors, whether it’s at a local distributor’s facility, a manufacturer’s training center or an industry convention. At the 2016 AHR Expo held Jan. 25-27 in Orlando, Fla., the Radiant Professionals Alliance held its annual business meeting and educational offering — seven unique classes that set some attendance records at this show. The “No Sweat Radiant Cooling” class was standing-room only, attended by contractors, architects, students and engineers.
Non solid state control strategies
Having been in this business for more than 30 years, I have seen some things that if you’d told me 30 years ago that I’d be seeing them today, I’d probably have laughed myself to sleep. Computers on boilers? You must be kidding! And now, here we are today, with more computing power onboard even the lowliest of boilers than there was on the spacecrafts that circled the moon many years ago. And don’t get me wrong, I am all for increases in system and employee ...
What is the ‘point of no pressure change,’ and why should you care?
In all the years that I have been writing and teaching, I have found that one of the hardest concepts for people in the hydronics business to understand is the concept and explanation surrounding what has been called the “point of no pressure change,” or PONPC. This concept is very simple, but hard to explain, and even harder for people to see it in their mind’s eye. During a recent code hearing, it was pointed out to me that the pressure at the PONPC will in fact change ...
Hydronic certification becomes reality
Many years ago, the Radiant Panel Association, predecessor of the Radiant Professionals Alliance (RPA), developed the first certification program for radiant installers and designers. I was one of the folks who took the time and sat for the very strenuous examination. If memory serves me correctly, I passed by the skin of my teeth. It was a fairly tough test and required a thorough knowledge of all aspects of radiant heating systems. The only real dilemma with the program was that it ...
Educational opportunity from your Radiant Professionals Alliance
Every other year, we query our Radiant Professionals Alliance (RPA) members via an Internet poll to gauge our membership’s wishes, wants and needs. During the last survey, our members told us that for the most part, they understood the pipe, valve fitting and heat source side of the equation, but they didn’t have a good handle on the business end of doing business.
Announcing Series 19000 Professional Qualification Standard recognition by ANSI
As a part of the Radiant Professionals Alliance’s (RPA) ongoing program to increase professionalism and raise the bar as it pertains to installation standards, the RPA has been working with ASSE International to develop ASSE/IAPMO/ANSI Series 19000-2015 Professional Qualification Standards pertaining to the hydronic system installer and hydronic system designer certification program. In addition to hydronic designer and hydronic installer certifications, the program will also be for ...
Piping methodologies for distribution systems - Pt. 2
In last month’s article, we looked deep into the pipes of an old two-pipe gravity circulation system. We will now continue looking at the history and advances of these wonderful mechanical systems. In this very same neighborhood near Capitol Hill, I came across a single-pipe gravity system that had its piping pitched upward from the gravity heat source, just like the two-pipe system. However, this system utilized a special fitting called a Eureka fitting. The Eureka tee was ...
Education, certification work together
In a previous column, I introduced you to the Radiant Professionals Alliance’s online educational system. This is an excellent resource for contractors interested in furthering their education as it pertains to hydronic radiant-based systems. Now I’ll introduce you to the certification program that is being developed and explain how the educational offerings fit into this program.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Mark
Contact Mark, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack