Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Michael Quin
New tool enables early intervention for diabetic foot ulcers
Workflow for thermal image acquisition of high-risk foot services before debridement. Credit: Journal of Diabetes Science and Technology (2026). DOI: 10.1177/19322968261501979 Australian researchers and clinicians have developed an AI-powered thermal imaging tool to predict if diabetes-related foot ulcers are likely to heal, potentially reducing hospitalizations and amputations.
Engineers Have Created the World’s First Floating Titanium
Dr. Jordan Noronha holding a sample of the floating titanium. Credit: Sara Tan, RMIT Australian engineers have developed a strong, lightweight titanium material that remains afloat even after severe damage, offering a potential new option for marine infrastructure. Buoys, floating sensors, and other marine structures depend on sealed spaces to keep water out and stay afloat. A serious crack can flood those spaces and send the entire structure underwater.
New approach brings OLEDs to microchip scale
Scientists from RMIT University have created a light-sensitive material that can produce tiny, coloured light-emitting pixels, an advance that could enable sharper miniature screens and light-powered medical technologies. While screens are becoming increasingly sharper, shrinking them for use in augmented reality glasses, camera viewfinders or other applications is limited because conventional light-emitting diode crystals become dimmer the smaller they are cut.
First-ever floating titanium looks to transform marine construction
Engineers created an open-cell 3D-printed titanium lattice that floats by filling only its hollow internal struts with closed-cell polyurethane foam. The hybrid structure remained buoyant after cracking, connection failures and the fracture of an entire lattice layer, while outperforming common marine materials at the same overall density.
Engineers create a world-first in floating titanium
Cross sections of the titanium lattice cube showing before and after being filled with polyurethane foam for buoyancy. Credit: Sara Tan, RMIT. Research led by RMIT University shows the 3D-printed titanium lattice—made up of hollow, interconnected struts filled with foam—not only floats but also withstands seawater exposure and is stronger than the stainless steel or high-density plastic currently used in jetties, buoys and floating sensors. The paper is published in the journal Advanced Materials.
Cheaper, Stronger Titanium? New 3D-Printing Breakthrough Makes It Possible
A new titanium alloy from RMIT University could cut costs, boost strength, and transform 3D‑printing technology. Credit: SciTechDaily.com Engineers at RMIT University have developed a new 3D-printed titanium material that costs roughly one-third less than standard titanium alloys. Researchers at RMIT University in Australia have developed a new form of titanium for 3D printing that costs approximately 33% less than the titanium alloys currently in widespread use.
Technology for OEM Design Engineers
By Michael Quin, RMIT University Engineers from RMIT University in Australia have produced a new type of 3D-printed titanium alloy that's about a third less expensive than commonly used titanium alloys. The team used readily available and less expensive alternative materials to replace the increasingly expensive vanadium that is commonly used in titanium alloys. PhD candidate and study lead author Ryan Brooke inspects a sample of the new titanium alloy.
New 3D-printed titanium alloy offers greater strength at lower production cost
Engineers from RMIT University have produced a new type of 3D-printed titanium that's about a third cheaper than commonly used titanium alloys. The team used readily available and cheaper alternative materials to replace the increasingly expensive vanadium.
Insect protein blocks bacterial infection
A protein that gives fleas their bounce has been used to boot out bacteria cells, with lab results demonstrating the material's potential for preventing medical implant infection. (Nanowerk News) The collaborative study led by researchers at RMIT University is the first reported use of antibacterial coatings made from resilin-mimetic proteins to fully block bacteria from attaching to a surface.
Scientists propose new dietary fiber classification for tailored health benefits
Australian food scientists have reclassified dietary fibers—beyond just soluble and insoluble—to better guide nutritional decisions and drive targeted health food products. Dietary fibers in fruit, vegetables, beans and whole grains are some of the most important food components for human health. They help digestion, weight management, blood sugar control, heart health, cancer prevention and more.
Technology for OEM Design Engineers
The JW Winco product range now includes dowel pins, drill bushings in numerous dimensions, and knurled screws with and without internal hex. Dowel pins DIN 7979 with internal thread are used primarily in connection with blind bores, where they cannot drive out from the opposite side. Drill bushings DIN 172 or 179, also known as guide bushings, are indispensable parts used wherever bore holes require wear-proof linings.
New device spearheads cheaper seafloor test for offshore wind farms
Australian engineers have unveiled a clever new device—based on a modified speargun—as a cheap and efficient way to test seabed soil when designing offshore wind farms. The RMIT University invention launches a probe into the seabed to provide valuable data on what lies beneath. This testing is normally done by winching or dropping probes—known as penetrometers—from the deck of a support vessel.
Long-life low-carbon concrete switches 80% of its cement for coal ash Original
Coal ash is abundant around coal-fired power stations. In fact, that might be considerably understating things – globally, power stations produce around 1.2 billion tonnes annually, and in Australia coal ash accounts for nearly 20% of all waste. It's a staggering figure – and it's also a safe bet that this stuff will remain abundant long into the renewable energy transition.
'Exciting' new research new opportunity for green concrete
New research from RMIT University has shown ‘exciting’ results for low-carbon concrete which uses alternative materials like coal ash and pond ash. The modelling indicated that low-carbon concrete, from RMIT University, had the potential to recycle double the amount of coal ash and maintain performance levels. Compared to current standards, the amount of coal ash used in this low-carbon cement would halve the amount of cement required.
Technology for OEM Design Engineers
PhD candidate Jordan Noronha holding a sample of the new titanium lattice structure 3D printed in cube form. [Credit: RMIT] By Michael Quin, RMIT University A 3D-printed "metamaterial" boasting levels of strength for weight not normally seen in nature or manufacturing could change how we make everything from medical implants to aircraft or rocket parts.
Technology for OEM Design Engineers
PhD candidate Jordan Noronha holding a sample of the new titanium lattice structure 3D printed in cube form. [Credit: RMIT] By Michael Quin, RMIT University A 3D-printed "metamaterial" boasting levels of strength for weight not normally seen in nature or manufacturing could change how we make everything from medical implants to aircraft or rocket parts.
'Ineffable cryptography' to protect critical infrastructure from cyber attacks
Australia's critical infrastructure—including ports, energy grids and water supplies—reported 143 cyber attacks over the past year, up from 95 incidents the year before.
Titanium micro-spikes skewer resistant superbugs
A new study suggests rough surfaces inspired by the bacteria-killing spikes on insect wings may be more effective at combating drug-resistant superbugs, including fungus, than previously understood. The increasing rates of drug-resistant infection has health experts globally concerned.
Smart stitches to reduce infection, simplify post op monitoring Original
A new antimicrobial suture material that glows in medical imaging could be a promising alternative for mesh implants and internal stitches. Surgical site infections are one of the most common medical infections, occurring in 2 to 4% of patients post-surgery. For some procedures, such as vaginal mesh implants to treat prolapse, infection rates can be much higher, leading to a ban on that procedure in 2018 in Australia.
Mini radar could scan the moon for water and habitable tunnels
Lab technician holds MAPrad prototype in the Micro Nano Research Facility clean rooms at RMIT. Credit: RMIT University A miniature device that scans deep below ground is being developed to identify ice deposits and hollow lava tubes on the moon for possible human settlement.
Successful trials show way forward to making quieter drone propellers
The team used machine learning to design their propellers, then 3D printed several of the most promising prototypes for experimental acoustic testing at the Commonwealth Scientific and Industrial Research Organisation’s specialised ‘echo-free’ chamber. Results now published in Aerospace Research Central show the prototypes produced around 15dB less noise than commercially available propellers, validating the team’s design methodology.
Technology for OEM Design Engineers
Good news for aero and medical: Adding copper strengthens 3D-printed titanium Titanium and copper powder with 3D-printed bars. Successful trials of titanium-copper alloys for 3D printing could kickstart a new range of high-performance alloys for medical device and aerospace applications.
New AI smashes Google DeepMind in video game challenge
A new breed of algorithms has mastered Atari video games 10 times faster than state-of-the-art AI, with a breakthrough approach to problem solving. Designing AI that can negotiate planning problems, especially those where rewards are not immediately obvious, is one of the most important research challenges in advancing the field.
Drones can now flap wings and ride wind currents like birds
A bird-like drone inspired by a wedge-tail eagle that “stole” one of the researchers' $10,000 test drones. Credit: RMIT. The next generation of unmanned drones will act more like birds than machines, thanks to new research. In a study just published in Bioinspiration & Biomimetics, researchers from RMIT University in Melbourne and ISAE-Supaéro in Toulouse, unveiled experiments with drones that can sense wind gusts and thermals, then use them to gain speed or altitude, just like birds do.
The secret ingredient for next generation nanochips could be air
Credit: RMIT. Researchers at RMIT University have engineered a new type of transistor, the building block for all electronics. Instead of sending electrical currents through silicon, these transistors send electrons through narrow air gaps, where they can travel unimpeded as if in space. The device unveiled in material sciences journal Nano Letters, eliminates the use of any semiconductor at all, making it faster and less prone to heating up.
New tech could make 100-times-faster internet
Groundbreaking new technology could allow 100-times-faster internet by harnessing twisted light beams to carry more data and process it faster. Broadband fiber-optics carry information on pulses of light, at the speed of light, through optical fibers. But the way the light is encoded at one end and processed at the other affects data speeds.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Michael
Contact Michael, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack