Servo myServo

Things used in this project × 1 × 1 × 1 Introduction Most Bluetooth servo controller tutorials use a standard Arduino Uno with a breadboard. This project takes it a step further — we designed and assembled two custom PCBs, each built around the ATmega328P microcontroller, with an HC-05 Bluetooth module and a servo motor connected directly. One board acts as the transmitter (sends angle commands via Bluetooth), and the other acts as the receiver (drives the servo based on received data).

Things used in this project × 1 × 1 × 1 LED Strip, NeoPixel Digital RGB × 1 DC Power Cord 5V Power Supply × 1 General This project was assigned under the prompt “cultivating light.” My partner and I were expected to collaborate together to combine artistic both components and technical aspects to create a project responding to the aforementioned theme. Decision My partner and I decided to take our project in a much more literal direction.

Things used in this project DFRobot MindPlus Arduino Coding Kit × 1 × 1 DFRobot I/O expansion shield × 1 × 1 × 1 × 1 × 1 I've recently posted a tutorial about this project on YouTube explaining everything you can read on this article. You can watch it right below. Servo Motors with Arduino - Lesson #19 Introduction Imagine telling a motor to move to a position - and instead of spinning blindly, it actually checks whether it reached that position and corrects itself if needed.