Sujit Banerjee

Introduction Click to copy section linkSection link copied! Desiccants used in industry are typically dehydrated through temperature swing adsorption. High temperatures of 200–250 °C are required for molecular sieve; (1,2) less aggressive conditions suffice for dessicants such as silica gel (3), where solar dryers can even be used. The energy burden for regeneration is high because the water is removed evaporatively.

Introduction Click to copy section linkSection link copied! Desiccants used in industry are typically dehydrated through temperature swing adsorption. High temperatures of 200–250 °C are required for molecular sieve; (1,2) less aggressive conditions suffice for dessicants such as silica gel (3), where solar dryers can even be used. The energy burden for regeneration is high because the water is removed evaporatively.

References , , and . 2021. Salt precipitation during geological sequestration of supercritical CO2 in saline aquifers: A pore-scale experimental investigation. Advances in Water Resources 155: 104011. , , , and . 2023. Continuous dewatering of sludge and aqueous slurries by sodium polyacrylate. Case Studies in Chemical and Environmental Engineering 7: 100289. , , , and . 2021b. Mechanism of dewatering porous structures with supercritical carbon dioxide.