We report a high-order laterally coupled distributed-feedback (HO-LC-DFB) semiconductor laser emitting near 850 nm. A 50th-order Bragg grating with a period of approximately 6.25 µm can be fabricated by conventional 405 nm ultraviolet lithography, substantially reducing process cost and complexity. The coupling coefficient and radiation loss were optimized by theoretical analysis and numerical simulation.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Suping Liu
Air quality index prediction using a hybrid CEEMDAN-CNN-IGWO-BiGRU-Attention model
Abstract Precise forecasting of the Air Quality Index (AQI) is essential for environmental management and public health protection. However, the non-linear and non-stationary nature of AQI time series presents a significant challenge for traditional predictive models. Most current deep learning approaches still face limitations in feature extraction and rely on inefficient manual hyperparameter tuning.
Fabrication of dielectric DBR for long-wavelength VCSELs by magnetron sputtering
In order to fabricate dielectric distributed Bragg reflectors (DBRs) with high thermal conductivity and reflectivity, magnetron sputtering of ${{\rm AlF}_3}/{\rm ZnS}$ DBR structures was systematically investigated. The fluorine deficiency issue in ${{\rm AlF}_3}$ films was addressed by introducing ${{\rm SF}_6}$ gas, which significantly improved stoichiometry control.
Clinical significance of intensity-modulated radiotherapy (IMRT) to the distant metastatic lymph nodes for metastatic cervical cancer - BMC Cancer
References Alix-Panabières C, Pantel K. Clinical applications of circulating Tumor cells and circulating tumor DNA as Liquid Biopsy. Cancer Discov. 2016;6(5):479–91. Article PubMed Google Scholar Sung H, et al. Global Cancer statistics 2020: GLOBOCAN estimates of incidence and Mortality Worldwide for 36 cancers in 185 countries. CA Cancer J Clin. 2021;71(3):209–49. Article PubMed Google Scholar Guo M, Xu J, Du J.
High-power 940 nm DFB laser diode with large optical cavity
High-power laser diodes with a stable wavelength and narrow linewidth are crucial for many applications. In this study, we introduce a first-order distributed feedback (DFB) grating into an asymmetric large-cavity laser diode operating around 940 nm. This design maintains high output power and offers a wide temperature locking range.
Theoretical investigation on the effective coupling optical system between an astigmatic tapered diode laser beam and single-mode optical fibers
In this study, we theoretically investigate the coupling efficiency of tapered diode lasers to single-mode fibers in four different coupling systems using an astigmatic beam propagation algorithm. The fast-axis lens and slow-axis lens have been used to mitigate astigmatism, which is a characteristic of the tapered diode laser and then the beam coupling into different single-mode fibers.
High-power distributed feedback laser diode arrays with narrow spectral width over a wide temperature range
High-power semiconductor lasers with stabilized wavelengths are recognized as exemplary pumping sources for solid-state lasers. This study introduces distributed feedback (DFB) laser diode arrays designed to maintain an extensive temperature locking range. We report experimentally on high-power 808 nm DFB laser diode arrays. The first-order sinusoidal grating was fabricated using nanoimprint lithography, succeeded by inductively coupled plasma (ICP) dry etching and subsequent wet polishing.
High-power narrow spectral width 975 nm semiconductor laser with high process compatibility achieved by high-order gratings
We present broad-area semiconductor lasers with a 100th-order high-order distributed Bragg reflection (HO-DBR) grating structure, fabricated with the conventional UV lithography techniques. Based on the finite-difference time-domain (FDTD) algorithm, a maximum output power of 10.5 W, emitting around 975 nm with a spectral width of less than 0.5 nm FWHM has been achieved. This method provides insights for reducing the manufacturing costs of the high-power narrow spectral width DBR lasers.
Development of the prognostic value in lung adenocarcinoma based on anoikis‐related genes and initial experimental validation
DATA AVAILABILITY STATEMENT The data generated or analyzed during this study are available in the Gene Expression Omnibus (GEO) (https://www.ncbi.nlm.nih.gov/geo) caArray_jacob-00182 (GSE68465) and GDC TCGA (https://portal.gdc.cancer.gov) (LUAD datasets). The raw datasets used and analyzed during the present study are available from the corresponding author upon reasonable request.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Suping
Contact Suping, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack