My Son has just moved in to his first place, I gave him my old Marantz but it seems to have given up the ghost in storage and just powers on to a standby light! So, could do with a cheap AVR with eARC I think. That should make for the easiest and most stable setup for his basic needs. Thanks
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by TB Rich
Speaker cables and worms in tins
sha66y Prominent Member #1 I am a little shocked and alarmed that my audio cable belief system is shattered! a little light reading: I have used Vandamme 2.5 blue for 4 years and loved it, however 3 months ago I decided to give “ change” a go and so fitted some Audioquest Rocket 11‘s ( bare wire to amp) to my surprise my wife noticed an immediate difference ( she described it as a bit louder and clearer), i on the other hand noticed a difference, but not necessarily a better sound….
Bluesound n130 or 2i
#1 Hi folks,have kef q350 and a chi-fi loxjie a30 amp,looking at the 2021 node and the node 2i,what is the major differences besides the hdmi?mostly want it so i can stream mqa(tidal)&amazon hd&uhd.is the extra cost justified for the 2021 model.would be using the nodes dac.not sure what the loxjie has i think an es9023,so assuming the nodes would be better. Thanks. #2 Think the newer one has a resigned power supply and WiFi brd. Your only going to know which is better with an A/B test.
Pre amp with home cinema/theatre bypass
DT79 Distinguished Member #1 I recently discovered that I get far better results for stereo in my home cinema system by using my Beolab 8000 front LR speakers on their own in straight stereo than by using the Anthem Room Correction or attempting to cross them over to the subs (which are located behind which might have something to do with it), so I thought I’d double down on the stereo side of that system and by-pass the AV processor (Anthem MRX520 used just as a processor) altogether and...
Dynaudio Evoke 20 review. Best subwoofer?
#1 As expected soft dome tweeters have softer attack than aluminum tweeters… This gives the listener relaxing listening session. Very musical and muscular speakers! That 7 inch driver sure moves some air. They are brand new so I don’t dare have the volume too loud, but normal volume and the bass is quite decent. Very decent in fact. I’d like to see if you can both feel and hear the bass drums on the song The losing End by Neil Young and you can. Evil Dub by Trentemøller also.
Help - setting up KEF R3 (single wire connection)
SandyF Established Member #1 So, I picked up the KEF R3 and the new amp and took them home. The KEF R3 are the first biwarable speakers I have bought - and they've got these link knobs on the back. Unfortunately, the intructions do not explain what these knobs do. I'm supposed to turn the knob on the left speaker in a particular direction - and it does affect the sound quality, but I'm not sure if I am supposed to turn the knob on both speakers or not.
Important Squeezebox mysqueezebox.com news
gvh Established Member #2 Can anyone tell me if there is anything urgent we may need to do before they close the servers down? May sound like a silly question but I seem to remember something similar with Blackberry and wishing I had done something before it was too late. #3 I only use my SB for local NAS playback, so it doesn't matter? #4 i dont use LMS anymore but this is always the fear for anything music and internet related. What if the provider just shuts up shop one day and you lose access.
TB Rich Prominent Member #1 (Schiit Freya S now sold) For sale is the renowned Schiit Yggdrasil+ OG DAC I would genuinely love to keep this and will be sad to see it go, but I simply need to the funds to offset the purchase of a NAD M66. Yggdrasil+ OG: £1650 Including p&p (Royal Mail Special Delivery with additional £2500 insured cover) This is the latest version of the Yggdrasil with the ‘+’ chassis, slimmer and upgradable.
What's an Upgrade from Arcam SA30?
#1 Toying with the idea of changing my Arcam SA30 .... I think part of this is just an itch so don't know how serious I actually am, think it would depend wholly on whether I thought something would be a significant upgrade or not and balancing that vs the cost to do so. If I say what I'd like to improve (may not all be possible) it'd be better bass control, better at low volume (appreciate related to speakers as well) and maybe slightly more energetic / livelier ....
For Sale - Schiit Yggdrasil+ OG and Schiit Freya S
I would genuinely love to keep these and will be sad to see them go, but I simply need to the funds to offset the purchase of a NAD M66. Individual prices below, fully inclusive of insured postage and PayPal fee’s. If buying both then a package price reduction of £100 to: £2200 Yggdrasil+ OG: £1700 Including p&p (Royal Mail Special Delivery with additional £2500 insured cover) This is the latest version of the Yggdrasil with the ‘+’ chassis, slimmer and upgradable.
Audiolab 8300A or NAD C368 for B&W 705 S2
#5 Thanks for the insight! I don't think the Arcam or the Rega has the trigger input though. Maybe the Musical Fidelity M3si? I would have thought more people would like to interject their opinions into this. Last edited:
suggestions for improving my system /streaming
reevesy Distinguished Member #1 hi all, after using a server for streaming for quite a while , i've moved away from all that and have been using amazon unlimited hd music for my streaming...as i had a couple of echo's about the house for controlling stuff etc. my system is the quad solus artera cd/amp all in one ...not the newer streaming model unfortunately and quad Z1 speakers .
Playing with DSP
TB Rich Prominent Member #1 The Squeezebox Touch is hooked up to my secondary system which is desk based and uses LS50 Meta's and a REL Tzero v2 - first thing was first to take some initial measurement sweeps.
DSP as a means to eliminate the need for hi-end speakers
rs172 Standard Member #1 After trying several standing speakers in my system which consists of a Denon avr 4500h receiver connected to a NAD poweramp I have noticed that using room correction via the receiver's DSP I measure a flat frequency response no matter the speakers I use. After fiddling with the speakers placement I have managed to make all speakers that I tried to disappear. The sound stage and imaging is excellent, consisting of layers and excellent depth within the soundstage.
Roksan Attessa Streaming Amplifier Review & Comments
#2 Thanks for the review Ed, as always. You have a way with words that usually brings a chuckle, and we all need a little more chuckling in our lives. I’m not in the market for an amp at present, but if I was, I think this would tick a lot of boxes. I’ve liked the Roksan sound ever since I demo’d a Kandy over 15 years ago and have enjoyed their sound ever since.
New Amp - Nait, Hegel, Exposure....Kinki Audio??
Smonks Standard Member #1 I'm looking to build a completely new hi-fi system after many years of relatively budget buys. I'm at the age now where I'd like to start piecing together a 'forever system' which will be a major step-up from my current gear. I'm not going to list my current set up as this will be a new 2 channel system from scratch - amp, speakers, turntable and streamer and possible extras if needed like phono stage and DAC.
fyne audio F501
anis67 Standard Member #1 Bought these blind after reading a what hifi review and thought i would home demo using richer sounds return in 14 days if not satisfied option.i have a cambridge audio cxa80 and cxn and previous speakers were dali zensor 3 (which were excellent) .
Kef R3 -attaching cables!
#2 I've always used the bottom pair. There's no difference into which binding post you wire into as long as the make sure the jumper knob is turned fully clockwise if using a single amp. 'My opinions expressed here do not represent those of the AVForums or its associated websites'. Head-Fi: Denon DCD-2500ne>Lehmann Linear, Oppo PM1, Focal Clear MG, Denon AH-D9200, Meze Liric 2. #3 I've always used the bottom pair.
KEF R3 Pairing
#1 Hi all, Firstly, thank you for reviewing this post and putting in your two senses if you plan on doing so. Please find my predicament below, and advise as you see fit. Last year I purchased a sound system for my second bedroom in an apartment now used as an office /listening /gaming room. At the time, I purchased a Marantz hd-1 amp, kef q350, Bluesound Node N130 and a kef sub. I decided to make a few upgrades since I felt I was missing something, the sound was good, but I wanted better.
McIntosh MA7200 Integrated Amplifer Review & Comments
#2 Brilliant review Ed. Always wanted a Big Mac. I love the sound, the looks. I’ll get one one day and it will be my forever amp. Rob. Resolution Audio, Bel Canto, Neat, Project.
Question - Pioneer N50A is not being detected by the iPhone, any suggestions?
#1 Hello, the player is connected via LAN, recognized by the router and PC, and internet radio plays without issues on the player. However, it's not being detected in the Pioneer Music Control App and Pioneer Remote App. Proxy is off, DHCP is on. The firmware is up to date (034_039_1019_100). What could be the issue? #2 the player is connected via LAN do you mean you have connected with an ethernet cable?
Two Driver Subwoofers
#1 There are a lot of two driver subwoofers out there and are quite popular with many enthusiasts and audiophiles and I'm quite interested how other subwoofer owners think about them and how they sound. My experience is they can pressurize a room quite well usually better than single driver subwoofers in most cases, but it seems the drivers conflict with each other and you lose some detail even though the bass is louder.
Optimising AVR subwoofer channel gain/trim level
Mr Wolf Distinguished Member #1 Now why should you care are about this subject? Well, as @Conrad kindly pointed out to me some while ago, running a higher subwoofer pre-out voltage at the AVR/AVP creates a cleaner signal due to raising it above the noise floor i.e. higher SNR. So you want to run your AVR's subwoofer trim level as high as possible but without clipping anything.
volume control recommendation
#1 hellou! It looks like I'm gonna need a preamp to stick between my broken D90 (preamp module is buggered and Topping won't replace it) and my new power amplifier (March purifi based). This would be my first preamp and I'm totally clueless! I like the xlr inputs and outputs on this one but it's a bit too expensive. Bel Canto Analogue PRE5 Preamplifier Rrp £2700 Ex Demo Bargain!!!! | eBay why are they so expensive? I thought a preamp was just a volume control can anyone recommend any brands/models?
Question - Does Streamer Quality Matter??
Mr Broon Established Member #1 I've just upgraded my amp and speakers - Electrocompaniet eci 80d into PMC Prodigy 5's. I'm mainly streaming these days and use a Bluesound node 2i. I'm running this via coax into the eci 80d and the result is stunning. I'm assuming that, as I'm therefore using the node as transport, that there would be no particular sonic benefit to upgrading to eg an Auralic Aries?
Do you juice the bass?
stevos Distinguished Member #1 I have noticed on a lot of YouTube channels that they like to juice the bass in their settings, with +10db or higher seeming to be common. I'm curious is this a common thing done or just for people that play at lower master volumes or the serious bass heads? Do you boost yours and if so how much? I have tried in the past with it but never really liked it, especially when it comes to using the system for music.
Audyssey App results
TB Rich Prominent Member #1 I've just finished doing a second play through now I have XT32 and the Audyssey App - I've got 3 different curves, interested to know which one most people may choose? - Is this broadly how other people are setting up their systems too? Red line is the as-is XT32 output, so mains were set as large/full range, sub level reported at -10.5dB, reference curve, etc (although I did turn off midrange compensation and all the dynamic eq/volume malarky).
Dirac + Bluesound
#1 Enhance your Bluesound listening experience with Dirac Live for Bluesound. Dirac optimizes the sound for your room with smart acoustics. www.dirac.com I see that Dirac has announced a partnership with Bluesound today, and a Node X is in the initial product shots. I wonder how far back they will back date it, Dirac on a Node 2i probably feels a little optimistic?! @nygafre thought you might be interested in this, sure it'll come to a Powernode of some model too.
New: Primare SP25 Prisma AVP
spinaltap Distinguished Member #2 It's a great shame the sub out's are parallel, and so it'll never be capable of Dirac bass control multisub - As for even DLBC single sub then they are/were considering it, but the lack of independent sub out is an immediate rule out for me on this model.
Audio Technica AT-SB727 Sound Burger Portable Turntable Review & Comments
Review Specs Discussion (16) #2 hi Ed, I’m really liking the practical application of this, the lack of space it takes is a big win & it’s portable nature. Can we have more niche product reviews please. Keep up the fine work. G #3 Perfect for listening to albums on the tube ____________________________ The quality of your life is determined by the quality of the questions you ask.
Subwoofer advice for pairing with Q Acoustics M20
#1 Subwoofer advice for pairing with Q Acoustics M20 I recently bought a pair of the Q Acoustics M20 speakers (which I absolutely love), and I am now looking to pair them with a subwoofer. I was initially looking at buying one of the Q Acoustic‘s slimline subs, however I have not read many good reviews for Q Acoustics subs. Are there any recommended subs that would pair well with the M20’s and also look aesthetically similar (or at least not look out of place)?
Hegel H390 vs Rotel Michi X5 vs NAD M33
Hasi Novice Member #1 Hi everyone, would like your opinion on the listed 3 amps. Im planning to upgrade to one of these. Will be using - speakers B&W 702 S2/REL T9i Sub. Mainly listens to streaming using tidal (at the moment) but looking to use Vinyl a bit with the new upgrade as well. If Hegel and Michi I would probably use Roon via USB. Let me know your thoughts. Much appreciated in advance. Many thanks #2 I would also chuck the Lyngdorf TDAI3400 into the mix if you are auditioning.
Question - My new Hi Fi system is bright :(
#1 Hi, So I had a cheap soundbar (without a subwoofer) for years. Last week bought a new Hi-Fi system - KEF R3 Meta & Cambridge Audio CXA81. The problem is that it sounds bright to my ears. Voices don't sound as full & warm as I would expect and for example, high hats are too much on my ears. My music taste is mostly Hip hop, and R&B but also some pop. This is also based on a comparison with Airpods Pro which I am used to listening to and my previous soundbar.
Question - Using Audiolab 6000A as part of AV setup - Query.
Mr Lime Distinguished Member #1 I just took delivery of the Audiolab 6000A amp and I want to use it to drive the main front L-R speakers in my home cinema AV set up, while simultaneously using it as a stereo amp with my CD player and tuner connected to it. Do I simply run the Pre-Out Front L-R from my AV amp to the normal AUX phono inputs on the Audiolab where I would connect the CD player, etc, or do I connect them to the power input sockets on the input panel?
Stereo Audio system advice (£10k budget)
diseasex Established Member #1 Hi guys I’m new to this forum and must say audiophile gear in general, I have neglected old 5.1 system and fearly OK headphones (Sony xm1000 m5) for office use Now I’m doing house move and have remaining budget to upgrade my hifi that will ideally last me decade or 2 The room size is 4.5m x 3.8m which I’m planning to turn into home office/man cave.
Lyngdorf BW-2
TB Rich Prominent Member #1 Been mulling over running a pair of BW-2’s, and looking over the specs they are listed at 106dB RMS THX Method: 40-80hz. Does anyone know what the THX method actually is; continuous? anechoic? 10% distortion? (I would assume it to mean) I’m assuming too that these things should really play a very flat response over a very wide range, given their potential for 800hz playback.
Yamaha RX-A4A 7.2 Channel AV Receiver Review & Comments
#2 My Question is where are Yamaha Slimline Receivers Model No New model since Rx 602……….? Had to go to Marantz for there Slimline Version a lost Sale. Yamaha get your A…. In gear . - PIONEER KRP-500M - B & W XT SERIES - YAMAHA RX-V1900 - HUMAX HDR 500GB - OPPO BDP- 93 - ZIDOO Z10 - ZIDOO X20 - ZIDOO X10 - PANASONIC PRO PF11 - B & W M1 - SONY S7700 - PANASONIC PRO PF50 - #3 Martin you forgot to mention the Yamaha web interface, which gives you a whole set of adjustments to tweak.
Quad Platina Integrated Amplifier
Snippet previews such as this one have got me licking my lips for the Quad Platina integrated amplifier. Some immediate positives. Well it’s a Quad. If it carries the same tonal balance as my Vena II and Artera (perfectly judged top end, full-bodied midrange and yet exciting and quite bullish when it needs to be with lightfooted timing), but with more bass grip and power, then I’ll be very pleased indeed and may seriously consider this.
Wharfedale Lintons, who is happy with theirs?
YoK Established Member #1 The next piece of my system that I'll be looking at upgrading is my speakers. Front runners are the Wharfedale Lintons, I've watched a ton of YouTube and read as much as I could and see these as top of the shortlist. This is bolstered by the fact I'll be able to audition them locally too. Can I ask if anyone is using them in a smallish room? I'd be looking at having them in a 4.5 x 3.2m room, listening position would be just over 2m away.
Question - EVERSOLO DMP-A8 harsh and thin!
#1 EVERSOLO DMP-A8 I just got a Eversolo DMP – A8 and it sounds harsh! And THIN. I tried using the parametric EQ and everything that I could find on the unit to try and make it less harsh but it seems that most of it has zero effect. It seems as if they EQ and sound adjustment does not work. I downloaded Apple Music onto the unit. It seems some of the Internet radio stations. The high-quality stuff is less harsh. I also watched and listened to TV through it.
Eversolo DMP-A8 Streaming Preamp Review & Comments
#2 Baffling, another review that fails to cover the DSP aspect of this device, arguably the single biggest difference to that of the A6. I'm fairly sure at this point that it's not possible to apply different EQ profiles to the RCA and XLR outputs, and thus it can't provide time aligned sub to mains output.
Yamaha Streamers - Digital Output
#1 In my 2nd system (starting to become the main one these days) I currently have a Yamaha WX10 as a streamer for Spotify, into a Lyngdorf TDA2200. I would like to see if there is any improvement using the DAC in the Lyngdorf, and wondering if anyone has tried the NP-S303 or WCX-50 as a digital streamer, over the WX10? Looking around you can get a used NP-S303 or WXC-50 for about the same price, just under £300. I believe they are the only Yamaha options for Musiccast with a digital output?
Rega Elex Mk4 Integrated Amp Review & Discussion
#2 Thanks for the Review Ed. Looks like another great Rega product. No mention of HT (Home Theatre) Bypass in the review - I’m assuming you still need a Elicit-R for that feature? Regards, James. Living Room: 65” Panasonic GZ950B OLED Television, Oppo UDP-203, Denon X6200W, KEF R series 5.1.2 speakers. Rega Elicit-R 2 channel amplifier and Rega DAC-R. Home Cinema: JVC RS440 Projector, Oppo UDP-203, Denon X6200W, Monitor Audio Apex series 7.1.2 speakers. I'm a THX Certified Professional.
Wiim Amp Integrated Amplifier Review & Comments
#2 #3 Not stellar review in some ways… Bear in mind this is the reviewer own opinion. Your opinion might differ. Last edited: “I admire your luck…. Mr”. “ Bond, James Bond”. What line. Caution : Do not create cable thread. #4 I think it Ed's review is a stellar review. There's some obligatory nonsense about another amp (in this case a poor performing noisy Rega), but it's perhaps the best review of a device he's ever done.
Audiolab Remote Control
telb Standard Member #1 Hi, my Audiolab 8300A remote control is a real problem. The back of the remote control is sprayed with something that makes it feel soft. After a couple of years the surface has become very sticky to the point that I do not want to use it. Cleaning makes no difference. Has anyone else had this problem? Thanks for any advice. #2 Same with my Marantz RC9001. I'm afraid I don't have a solution.
large music collection, LMS management
rccarguy3 Distinguished Member #1 For those with large music collection, I'm having some issues. Before I used to have A-Z in artists, but now it's so many it's not showing those, I have a lot of songs where it's only one or two tracks so it's cluttering up main branch Any ideas? If I use "compilation" tag to 1/yes would that help? Or what about using "album artist" tag and change that various? I'm thinking this could be a solution. Or use compilation yes and album artist to various?
Question - Trying to decide
wiz Outstanding Member #1 Got a Bluesound Node 2i with a SMSL M500 MkII Wondering whether it's worth going all in and buy a Eversolo A6 or just upgrade the dac to a Gustard R26 or Denafrips ares II?
Question - Complete system £2500 advice
#1 New hi-fi set up circa £2500 Looking for advice on what to purchase, starting again with a new hi-fi system. Currently, I have some old budget stuff that's about 25 years old but thinking about keeping the Pro-Ject Debut II turntable to start with as has been little used. Have loads of CDs, fewer records, and use Spotify.
Article: Bristol HiFi Show 2024 Report and pictures
#2 Some interesting absentees which could be perceived as quite telling. The B&W demonstration was always popular. The photo of the venue hardly sells the event. It was a lot simpler with nicam stereo! #3 I’m looking forward to a listen to the Epos 7s. A move to a smaller living room may dictate a change. Last edited: AVI Trios and Lyngdorf TDAi 1120 + two BK XLS200s. #4 Some interesting absentees which could be perceived as quite telling. The B&W demonstration was always popular.
Wiim mini vs pro optical sound quality
mrTT Established Member #1 Hi Guys Got myself a Wiim mini which i'm temporarily using with my old av reciever via optical. I plan on getting an audiolab 6000a soon. I've come across a couple of reviews on youtube which state the sound quality of the mini isn't as good as the pro even when using the optical out on both. How accurate is this as i thought they would send the same bit perfect digital signal to an amp/reciever?
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with TB
Contact TB, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack