Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Xiaoding Wei
Control of ice thickness in cryo-EM via confinement
Abstract Achieving thin ice with optimal thickness is a prerequisite for successful cryo-EM analysis of embedded macromolecules. Despite decades of effort, precise control of ice thickness in cryo-EM remains a major challenge. Here we reveal that the intrinsic instability of sub-100-nm liquid film, a previously overlooked determinant before vitrification, plays a critical role in controlling ice thickness.
Van der Waals epitaxy suppresses thermal rupture in ultrathin metals
Abstract Metal films are indispensable to modern electronics, yet their continued downscaling is fundamentally limited by thermodynamic instability. In particular, ultrathin metals can exhibit liquid-like Plateau–Rayleigh instability and rupture at temperatures far below their bulk melting point, creating a long-standing challenge for both integrated circuits and emerging 2D-material devices.
Round and pleated blisters: interface delamination in thin film deposition
Interfacial adhesion energy governs the delamination and blistering behavior of metal films, with higher adhesion energies corresponding to greater resistance against interfacial failure. Therefore, accurately determining the interfacial adhesion energy between thin films and substrates holds significant implications for interface engineering strategies.
Mechanical exfoliation of non-layered metal oxides into ultrathin flakes - Nature Synthesis
Abstract The exfoliation of layered crystals can produce diverse two-dimensional (2D) materials and heterostructures. However, the micromechanical cleavage of non-stratified materials into 2D flakes remains challenging due to z-direction consecutive bonding. Here we report a mechanical exfoliation method for producing freestanding 2D metal oxide flakes.
Large-scale assembly of isotropic nanofiber aerogels based on columnar-equiaxed crystal transition - Nature Communications
Abstract Ice-templating technology holds great potential to construct industrial porous materials from nanometers to the macroscopic scale for tailoring thermal, electronic, or acoustic transport. Herein, we describe a general ice-templating technology through freezing the material on a rotating cryogenic drum surface, crushing it, and then re-casting the nanofiber slurry.
Fast synthesis of large-area bilayer graphene film on Cu - Nature Communications
Abstract Bilayer graphene (BLG) is intriguing for its unique properties and potential applications in electronics, photonics, and mechanics. However, the chemical vapor deposition synthesis of large-area high-quality bilayer graphene on Cu is suffering from a low growth rate and limited bilayer coverage. Herein, we demonstrate the fast synthesis of meter-sized bilayer graphene film on commercial polycrystalline Cu foils by introducing trace CO2 during high-temperature growth.
Uniform thin ice on ultraflat graphene for high-resolution cryo-EM - Nature Methods
A step-by-step protocol is available in the Supplementary Information. Production of wafer-scale Cu(111)/sapphire substrate The single-side polished C-plane (0001) sapphire wafers were purchased from Jiangsu Helios. The sapphire wafer had an ultraflat surface with an average roughness of <0.2 nm and a miscut angle of <0.5°. Before Cu film deposition, the sapphire wafers were annealed at 1,000 °C for 6 h in an oxygen atmosphere.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Xiaoding
Contact Xiaoding, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack