Preprint Article Version 1 This version is not peer-reviewed Version 1 : Received: 10 April 2024 / Approved: 11 April 2024 / Online: 11 April 2024 (09:26:52 CEST) Li, Y.; Wang, H.; Wu, G. Decoupling Interaction for CFD-DEM Simulations of Bubbling Fluidized Bed. Preprints 2024, 2024040771. https://doi.org/10.20944/preprints202404.0771.v1 Li, Y.; Wang, H.; Wu, G. Decoupling Interaction for CFD-DEM Simulations of Bubbling Fluidized Bed. Preprints 2024, 2024040771.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Yanggui Li
CFD-DEM Simulation of Slugging and Non-Slugging Fast Fluidization of Fine Particles in a Micro Riser
1. Introduction Gas-solid two-phase flow phenomena can be commonly found in nature and in industrial processes [1]. Fluidized beds were used early on for coal gasification and are currently widely used in industries such as chemical, petroleum, metallurgy, and nuclear industries. Nearly all types of two-phase flows in gas-solid fluidized beds are typical coupled complex systems and asymmetrical problems.
Research on the Mesoscopic Characteristics of Kelvin-Helmholtz Instability in Polymer Fluids with Dissipative Particle Dynamics
Abstract : In this paper, the two-dimensional Kelvin–Helmholtz (KH) instability occurring in the shear flow of polymer fluids is modeled by the dissipative particle dynamics (DPD) method at the coarse-grained molecular level. A revised FENE model is proposed to properly describe the polymer chains. In this revised model, the elastic repulsion and tension are both considered between the adjacent beads, the bond length of which is set as one segment’s equilibrium length.
Improvement of Relative DEM Time Step Range in Fast Fluidization Simulation of Type-A FCC Particles
Abstract : In many process engineering fields, gas-particle fluidized beds are widely used. In fluidized bed research, the discrete element method, or DEM, has been a powerful tool for design and operation purposes. However, with the use of Type-A powders, fluid catalytic cracking or FCC particles being classical cases, they have hardly been reported in DEM simulations of fast fluidization. This study paid close attention to the suitable selection of a stiffness constant and a DEM time step.
Selection of Relative DEM Time Step for Modelling Fast Fluidized Bed of A-Type FCC Particles
Abstract : In chemical production processes, the most suitable operation regime for A-Type powders such as typical FCC particles is high-speed fast fluidization owing to their uniquely advantageous properties. Discrete element method (DEM) for modelling fast fluidization with A-Type powders has rarely been reported. How to appropriately select the DEM time step and the stiffness coefficient is one of the most critical problems for stable and accurate calculation.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Yanggui
Contact Yanggui, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack