Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Engineering Harbin
Hot Deformation Behavior and Process Optimization of the 6005A/ADC12 Composite Fabricated From Solid-State Recycled Aluminum Chips
1 Introduction The global demand for aluminum and its alloys has increased rapidly across industries such as aerospace, automotive, construction, transportation, and packaging. This growth has also generated large amounts of waste, particularly in the form of scraps and machining chips produced during manufacturing and at product end-of-life [1-3]. Given aluminum's excellent recyclability, researchers have focused on developing efficient methods to recycle this processing waste [4-6].
The influence of heat treatment of lactoferrin powders on the physicochemical properties and bacteriostatic activity
CONFLICTS OF INTEREST The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the word reported in this paper. DATA AVAILABILITY STATEMENT The data that support the findings of this study are available from the corresponding author upon reasonable request. Supporting Information Filename Description idt70077-sup-0001-FigureS1.docxWord 2007 document , 420.4 KB Figure S1.
Enhancing Polymer‐Based Composite Properties via the Mechanical Chain Effect of Amino‐Functionalized Molybdenum Disulfide Nanosheets
Conflicts of Interest The authors declare no conflicts of interest. References 1, “Ultrathin Two-Dimensional Nanomaterials,” ACS Nano 9, no. 10 (2015): 9451–9469, https://doi.org/10.1021/acsnano.5b05040. 2, , , et al., “Defect-Rich MoS2 Ultrathin Nanosheets With Additional Active Edge Sites for Enhanced Electrocatalytic Hydrogen Evolution,” Advanced Materials 25, no. 40 (2013): 5807–5813, https://doi.org/10.1002/adma.201302685.
Preparation of thermally conductive polyimide/aluminum oxide/boehmite composite separators for enhancing lithium‐ion battery safety and performance
CONFLICT OF INTEREST STATEMENT The authors declare no conflicts of interest. REFERENCES 1, , , , , , , J. Power Sources 2020, 472, 228519. 2, , , , , , , , , , J. Power Sources 2021, 506, 230189. 3, , , , , ACS Appl. Mater. Interfaces 2017, 9, 25970. 4, , , , , , , , , , , J. Energy Chem. 2021, 59, 83. 5, , , , , , , , , , , , , Adv. Funct. Mater. 2024, 34, 2308929. 6, , , , , , , , , , Energy Storage Mater. 2022, 48, 123. 7, , , , Energy Storage Mater. 2021, 41, 522.
Directed energy deposition‐arc repair Al6.5Cu2Ni0.3Ti0.5Zr0.25V alloy: Microstructure evolution and Strengthening mechanism
Casting Al6.5Cu2Ni0.3Ti0.5Zr0.25V alloy is applied to aircraft engine components, but the casting defects are difficult to avoid. In this research, the local defects of casting heat-resistant Al6.5Cu2Ni0.3Ti0.5Zr0.25V alloy parts were repaired by the arc-directed energy deposition method.
Anisotropic Enhancement in Thermal Conductivity of Graphene Foam/Polymer Composites Based on Uniaxial Compression
Abstract High-performance thermal interface materials are in increasing demand because of the problems of dissipating heat from high-power computing devices. To solve this problem, this study proposes a method of microstructural design through uniaxial compression of graphene foam along the out-of-plane direction. The thermal conductivity of the composites with graphene foam shows an anisotropic growth along the direction of the compressive strain.
Direct Numerical Simulation of Surfactant Solution Flow in the Wide-Rib Rectangular Grooved Channel
The turbulent flow of surfactant solution in the wide-rib rectangular grooved channels was studied by direct numerical simulation. Moreover, the variations of near-wall streamwise vortices with time were discussed and the distributions of streamwise vortex radius, swirling strength and density were quantitatively investigated.
High Performance Thermosets with Tailored Properties Derived from Methacrylated Eugenol and Epoxy-Based Vinyl Ester
A renewable chemical, eugenol, is methacrylated to produce methacrylated eugenol (ME) employing the Steglich esterification reaction without any solvent. The resulting ME is used as a low viscosity comonomer to replace styrene in a commercial epoxy-based vinyl ester resin (VE). The volatility and viscosity of ME and styrene are compared. The effect of ME loadings and temperatures on viscosity of the VE-ME resin is investigated.
Single-Phase Mixed Transition Metal Carbonate Encapsulated by Graphene: Facile Synthesis and Improved Lithium Storage Properties
Transition metal carbonates (TMCs) with complex composition and robust hybrid structure hold great potential as high-performance electrode materials for lithium-ion batteries (LIBs). However, poor ionic/electronic conductivities and large volume changes of TMCs during lithiation/delithiation processes have hindered their applications.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Engineering
Contact Engineering, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack