"What is the best network protocol?" This single question can be a hotly debated topic between engineers, so this article will offer a surface-level look at some of the differences between DeviceNet and ControlNet. It will also explain why Ethernet/IP may dominate many applications, but may be difficult to entirely take over the industry. As network technology grows and evolves, it is important to understand what's happening between the devices that deliver value to a production line.
Mechanical Engineer background in R&D and fieldwork. Currently consulting & freelancing
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Jeff Kerns
Industrial Motor Health Tips | Modern Maintenance Solutions
Industrial motors are, quite literally, the driving force of manufacturing. Keeping electric motors healthy and operating properly can greatly affect production. According to a report from the Department of Energy, an average motor’s life cycle might be from 30,000 to 40,000 hours. When it comes to motor health, regular monitoring and maintenance will increase its life cycle. Industrial electric motors do not actually have that many parts, but each part is obviously critical.
TUD on Facts About PG&E Acquisition
Facts On PG&E Acquisition And Response To John Buckley, CSERC Imagine being presented with an opportunity to own an asset you, your family, and others have depended upon for generations. Now imagine that while you wait to make a decision, someone else buys that asset out from underneath you and then uses that ownership to exploit and take advantage of you and your family for decades.
TUD on Facts About PG&E Acquisition
Author Tuolumne Utilities District Board Vice President Board Term: 2018 - 2022 The primary purpose of the Tuolumne Utilities District is to efficiently provide reliable, reasonably priced water, sewer, and other services authorized under the California State Water Code to customers within its service area and to protect and utilize the available water resources within Tuolumne County for both present and future beneficial uses by residents within the District’s jurisdiction.
Are Wearables Decentralizing Medicine?
Check out trends and solutions that may help reduce the demand on medical professionals and move medicine into a decentralized future. Jeff Kerns | Nov 05, 2019 It’s no secret that increasing healthcare costs and an aging population are taxing the U.S. healthcare industry and exacerbating a skills gap within the medical industry. While automation and IoT are helping to alleviate the manufacturing skills gap, some companies are working on similar technologies to aid the medical industry.
Technologies Bridging the Skills Gap, Part 1
How to get advanced robotics and programming into your factories without the hassle. Jeff Kerns | Oct 25, 2019 While it might seem like robots are taking over everything, humans are very much still in demand. In fact, the lack of skilled labor could be one of the larger drivers of technology. “We are facing a looming skills gap in the manufacturing industry that we need to bridge by all means possible,” says Esben Østergaard, founder and CTO of Universal Robots (UR).
Medical Software Scales Healthcare
With an aging population and an increase in natural disasters, it looks like the medical industry will need to scale for both day-to-day and for heavy fluctuations during disasters. Fortunately, industry is finding ways to use technology and even open-source community competitions to answer this seemingly inevitable future demand.
Connecting Emergency Medical Professionals
The Call for Code IoT competition is preparing laypeople and professionals alike for natural disasters. Jeff Kerns | Oct 16, 2019 Make-a-thon and Hack-a-thon events have produced interesting solutions to the world’s problems. Call for Code is just one of these competitions, and it is showing a lot of promise.
Medical Software Scales Healthcare
With an aging population and an increase in natural disasters, it looks like the medical industry will need to scale for both day-to-day and for heavy fluctuations during disasters. Fortunately, industry is finding ways to use technology and even open-source community competitions to answer this seemingly inevitable future demand.
3 Trends in Mobile Industrial Robotics
Mobile Autonomous Robots While companies such as Boston Robotic are producing videos of robots able to run, flip, or do chores around the house, we don’t see then doing these tasks in industry. Perhaps the biggest reason these humanoid robots aren’t common in industry is cost. Like most solutions, engineers want to find the simplest solution to a problem.
New Technology Makes “Moves” in the Medical Industry
Missed hours and cost from injured workers has an effect on companies bottom line costing industry billions every year. StrongArm is producing quantifiable data to show how ergonomics with notifications to make sure workers stay safe. Keeping athletes safe, the elderly mobile, and workers uninjured is a challenge, but it isn’t stopping these companies from finding innovative solutions.
How to Fit Artificial Intelligence into Manufacturing, Part 2
In part 1 we reviewed why artificial intelligence (AI) is moving slowly. In short, AI is growing and will continue. Reports which say growth is slow may be looking into specific trends, industries, or AI on a mass scale. However, maturity, confidence, ROI, scaling, and connectivity might be slowing mass adoption. Additionally, we saw what AI can do in manufacturing. AI is amplifying design engineer’s abilities with CAD tools.
Starting a Digital Manufacturing Plan, Part 2
In Part 1we covered how to start a digital manufacturing plan with a modified Six Sigma DMADVV format. To review… Define who is at the table Define what they bring to the table Define what are their objectives and concerns Measure and analyze where analog and digital workflows connect Part 2 continues with when you need data, checking your pain points, and how to find product that can amplify and support the people in a company.
How to Fit Artificial Intelligence into Manufacturing
Even early concerns related to artificial intelligence (AI) have not appeared to slow its adoption. Some companies are already seeing benefit and experts are saying companies not adopting new technology will not be able to compete over time. However, AI adoption seems to be moving slowly despite early successful case studies. Why AI is Moving so Slow in Manufacturing?
Design Considerations for Metal 3D Printing
Thinkstock Are direct energy 3D printing metal processes right for you? Find out by checking out some of the design criteria. Jeff Kerns | Sep 18, 2019 With increased confidence in 3D printing, more design engineers are looking to see where new processes could add a competitive edge. While cost associated with 3D printing is reducing, metal printing could still be a large capital expense.
Building the Smartest City, Part 2
In part 1 I introduced the companies, educators, and research facilities I visited during my stay in Columbus, Ohio, along with a recap of my visit to Pillar Technology. In part 2 I meet with JE Grote, CoverMyMeds, and Ready Robotics. JE Grote Company A family-owned and operated manufacturer of food processing equipment, JE Grote built its corporate headquarters in the Columbus Region in 1982. Since then, the company has become a leading manufacturer of slicing and food assembly equipment globally.
Reclaiming Mobility via Technology
When people think of technological advances in the medical field, marvels like 3D-printed skin and bionic legs probably come to mind. But less sci-fi-oriented design concepts also play a significant role in restoring lost mobility. Take the simple wheelchair. In 1962 Ernesto Blanco was given $5,000 from the National Inventors Council for his wheelchair design, according to NPR.com. Rubber-tipped spokes would extend from the wheel’s rim, allowing the wheelchair to climb stairs.
Starting a Digital Manufacturing Plan, Part 1
What is currently on the market that will help a company get all the great things the IoT and Industry 4.0 are said to provide? This is probably one of the most damaging questions that lead to the most failures in a digital manufacturing plan. It’s like a chicken-and-egg problem: You need data to make informed decisions, but you need to make an informed decision on what data you need to collect to make that happen.
When Electric Vehicles Take Over
The electric vehicle (EV) market is growing globally, with no apparent sign of stopping. According to an article by Neil Oliver, technical marketing manager at Accutronics, one out of every 12 cars purchased in the UK is an EV. In 2018, sales in the U.S. increased by 81%. In the same year, EVs made up almost one-third of all car sales in Norway. Additionally, according to CleanTechnica, EVs sales are up 70% across Europe.
Building the Smartest City, Part 1
Machine Design visits Columbus, Ohio to follow up on how it’s using DoT grant money to become an innovative place to live, learn, and labor. Jeff Kerns | Sep 03, 2019 There were many cities applying for the U.S. Department of Education’s Smart Cities Grant in 2016 in an effort to facilitate their transformations into beacons of technology. But in the end, the coveted $40 million prize was awarded to Columbus Ohio.
The Challenge of 3D Printing Medical Devices
One way to accelerate innovation in recent times has been to use 3D printing. This process lets designers work through more iterations faster to find improvements, while accelerating failure to improve the next design. But prototyping with 3D printing’s geometries, volumes, and complexity capabilities might be challenging when moving into production. While material properties are being improved to drive 3D printing into production, some applications in the medical field are more demanding.
When Electric Vehicles Take Over
The electric vehicle (EV) market is growing globally, with no apparent sign of stopping. According to an article by Neil Oliver, technical marketing manager at Accutronics, one out of every 12 cars purchased in the UK is an EV. In 2018, sales in the U.S. increased by 81%. In the same year, EVs made up almost one-third of all car sales in Norway. Additionally, according to CleanTechnica, EVs sales are up 70% across Europe.
A Book About Everything
We review Christopher Lloyd’s book Absolutely Everything!: A History of Earth, Dinosaurs, Rulers, Robots, and Other Things Too Numerous to Mention. Jeff Kerns | Aug 16, 2019 At a time when companies are fighting for STEM and hands-on skills, it is important to excite a younger generation to become scientifically literate. A while ago, I received a copy of Christopher Lloyd’s book Absolutely Everything!: A History of Earth, Dinosaurs, Rulers, Robots, and Other Things Too Numerous to Mention.
Robots Are Invading America’s Operating Rooms
Being highly regulated can slow down industries such as healthcare, though often for good reason. Nevertheless, medical technology is moving faster than ever before. It seems like each year it’s possible to delay a surgery, the better and less invasive a procedure becomes.
3D Printing Drives the Medical Market
The three drivers growing the medical 3D printing industry are not necessarily the most advanced technologies. Jeff Kerns | Jul 11, 2019 Whether you realized it or not, you have probably already seen 3D printing in your everyday life. Perhaps you’ve driven in a car that used 3D printing in the development phase or flown in a plane that had 3D-printed parts. Or if you had surgery, you might have had 3D-printed tools guiding the doctors.
3 Ways to Spot a Winner
How do you identify success in the new Industrial Revolution? Jeff Kerns | Jun 18, 2019 Recently someone asked me what company is going to emerge as the winner as all of this new technology infiltrates manufacturing. The question is a bit too broad to answer with any value, but I put together the following to try and find some general answer that might offer insight. Look for employers using technology to work with people. Manufacturers will need to adopt new digital technology, but many will fail.
How Can A Digital Thread Change Your Company?
Having a full digital thread isn’t very limiting. There are actuators that do the work that are now featuring sensors, feedback, and flexible operations such as variable speed motors and advanced drives. This information is still often fed to PLCs, which is evolving into industrial computers and PCs that are stronger on software.
3D Printing Trends in Manufacturing, Part 3
In Part 1 of this series, I wrote about 3D printing market predictions, standards, inspection, technology, and materials that had the potential to expand and thrive this year. Part 2 focused on companies that are making that success happen. Finally, this article will conclude with a review of what worked in 2018 and what will be the drivers for 3D printing this year. It is difficult to cover everything in 3D printing.
Medics Take to the Skies
Bell and others have completed an air medic service training to form a robust medical network in the sky. Jeff Kerns | May 23, 2019 Hearing about the recent problems with Boeing’s training program raised a lot of concern not just in the aerospace industry, but with how we are regulating industries in general. Team aerospace and medical regulations together and you have a challenge few would try and tackle. But Bell Technology (formerly Bell Helicopter) is no stranger to challenges.
3D Printing Trends in Manufacturing, Part 2
In Part 1, I wrote about the 3D printing market predictions, standards, inspection, technology and materials that might expand and thrive in 2019. This article will focus on companies that are making it happen: How Stratasys is pushing for carbon fiber tooling, Ford and Carbon’s work on the F-150 Raptor Auxiliary Plugs, Ultimaker’s expanded push into industrial printing, and Optomec acquiring Huffman to accel the company into the repair and aftermarket.
3 Tips to Start a Digital Manufacturing Plan
ragsac/iStock/Getty Images Old-school solutions can aid adoption of advanced automation. Jeff Kerns | Apr 24, 2019 Many companies are pushing for more connected technologies. Manufacturers want data to better understand where more advanced products or services would make the most impact with the easiest integration. But where is the best place to start? Business managers want to see a return on investment. IT is concerned with security.
Medical Trends at Hannover 2019
Move over digital manufacturing: Digital medical will show you the full thread in a highly-regulated industry. Jeff Kerns | Apr 04, 2019 The medical industry is one of the largest and fastest growing industries according to the Bureau of Labor Statistics. As the Baby Boomers continue to enter retirement, that growth is only expected to accelerate. Preparing for Hannover Messe—the world’s largest manufacturing and engineering trade fair, currently underway—I noticed medical was a little hidden.
3D Printing Trends in Manufacturing, Part 1
I talked a lot about 3D printing in 2018, and this year the process will continue to grow. Some companies say the technology is at a tipping point of mass adoption, while other continue to take incremental steps towards disruption. This article will look at some of what we can expect moving forward. The 3D Printing Market It’s hard to compare predictions. Many predictions have different timeframes, focus on a specific part of 3D printing, or break up the technology into industries.
What Will 3D Printing Look Like in 2019? (Part 2)
Part 2: The Material Another year down and 3D printing is continuing to deliver solutions and growth with no intent on stopping. In Part 1 we covered some technologies in the printer on the market for 3D printing. For Part 2, we look to the present and future of materials. While 3D printing will have gradual disruption in multiple markets, there won’t be a 3D printing boom in 2019. Still, as more discover the capabilities of this innovation, it looks like growth will accelerate.
Looking Back at the Biggest Show in the West
Jeff Kerns | Feb 28, 2019 Five shows combined to spotlight technology and trends in the manufacturing industry. Manufacturing expo shows are an interesting cross-section of the entire industry. From hardware and software to gears, couplings, and materials, they’re veritable cornucopias of technology. At the Anaheim Convention Center in California this month, five shows took over the building to show off what’s possible and what technology engineers are looking for.
How to Find IoT Solutions
Last year I became aware that Informa, Machine Design’s parent company, is a member of the Industrial Internet Consortium. The IIC is an organization transforming business and society by accelerating the Industrial Internet of Things (IIoT). Its focus on real-world IIoT solutions was apparent when I first ran into the organization at the IoT Solutions World Congress in Barcelona, Spain. Once I heard there was an IIC members meeting in Raleigh, N.C. Feb.
Top Myths of 3D Printing
Jeff Kerns | Feb 23, 2019 This gallery aims to separate AM hype from fact. I’ve heard it many times. 3D printing can do anything: free complexity, full assembly, disruption of industry. While some of this is true, it is important to understand there is no cure-all in manufacturing. Every process has limitations, strengths, pros, and cons. The following provides excerpts from the recent article “11 Myths of Additive Manufacturing,” along with my own notes on the topic.
Book Review: Simplify Work
As new technology such as the IoT creates more complex systems, simplifying work will take on greater value. Jeff Kerns | Feb 11, 2019 Anyone who has ever worked for a large company—or watched parodies of doing so, a la “The Office” or “Office Space”—is aware of some of the ridiculousness that can occur in the corporate world. Outdated management practices, putting time into things that seem valueless, and poor communications all come to mind.
Cool Idea! Award Helps Automate Medical Solutions
demaerre/iStock/Getty Images SafKan’s new headphones could ease pain and discomfort for about 12 million people a year. Jeff Kerns | Feb 06, 2019 If I said 12 million people visit the doctor every year for a very specific reason, you might picture broken arms or the flu. What you might not think about ear wax. Nevertheless, every year more than 12 million Americans visit their physicians for impacted earwax removal.
MD&M 2019: Medical Materials
Entering the Anaheim Convention Center in California for the MD&M show, it’s always exciting to see what companies are presenting. Global health care spending is projected to increase at an annual rate of 4.1% in 2017 to 2021, an increase of 1.3% from 2012 to 2016. According to a 2019 report from Deloitte, global health care expenditures are expected to continue to rise as spending is projected to increase at an annual rate of 5.4% between 2017 to 2022.
The Importance of Expos
This year’s Pacific Design and Manufacturing Expo is taking place in Anaheim Feb. 5-7, along with the MD&M Medical Expo, Pack West, ATX’s automation technology expo, and Plastec West. It’s a combined extravaganza that’s difficult to cover due to its sheer size. Still, with technology and innovation moving faster than ever before, shows like this can help offer a glimpse on what’s happening now, and what’s to come. These events are always evolving and have something new to offer.
Industrial Motors: How to Get More Bang for Your Buck
The recent push to make everything smart or connected has led to some interesting evolutions in manufacturing. Application and infrastructure divided the use of electromechanical and fluid power. However, with the development of high-speed controls, quick-response motors, and improved software, variable-speed electric drives are finding their way into power hydraulic pumps. Previously these technologies were difficult to combine.
What Will 3D Printing Look Like in 2019? (Part 1)
Another year down and 3D printing continues to deliver solutions and growth, with no intention of stopping. Looking to the future of printers and materials, we can expect incremental improvements to each. While the technology will have gradual disruption in multiple markets, there won’t be a 3D printing boom in 2019. Nevertheless, as more discover the capabilities of this innovation, it looks like growth will accelerate.
Will Technology Replicate a Human in 2019?
With the New Year and flu season both in full swing, health-related technology trends are top of mind for many. But going beyond more pedestrian trends (e.g., wearables), this article takes a look at one that verges on sci-fi: namely, replicating humans. More to the point, how easy and accurate would it be to replicate a human? And if successful, what consequences would that have for your health? Well, if we are going to start manufacturing humans, perhaps we should start with manufacturing tools.
New Technique Helps You Cut Metals Easier
Metallurgy is an interesting science. You would think for the thousands of years humans have been working with it we’d have it pretty well figured out. Well, recently Purdue published a paper titled “Material-Independent Mechanochemical Effect in the Deformation of Highly-Strain-Hardening Metals,” which presented the idea of improving the plastic-flow in the cutting of metal.
Digital Manufacturing is Streamlining Innovation
In today’s market, even large companies need flexibility. One of the ways some companies achieve this is through undertaking projects separate from their regular operations, and sometimes in different locations. Whether they are called innovation centers or accelerators, the goal of these endeavors is the same: Bring something new to market, and do it fast. Companies have achieved success through physical separation and working in small groups.
The New Face of Motor City, Part 3
Click here for Part 1 Click here for Part 2 With unemployment shrinking and automotive suppliers investing about $16 billion into the state (from 2009 through the second quarter of 2015), Detroit still stands strong. Michigan is close to 63 top North American auto suppliers, and a short drive to about three-quarters of all R&D facilities in the automotive industry.
10 IoT Solutions
While the buzz surrounding the Internet of Things (IoT) has led to new products being released regularly at trade shows, this hasn’t often followed by real-world application. But companies are starting to find ways to apply IoT technology and case studies,` and solutions are surfacing. Roger Bou called out for such solutions more than four years ago when he started the Internet of Things Solutions World Congress (IoTSWC).
The New Face of Motor City, Part 2
Click here for Part 1 Two other highlights of my first day in Detroit were visits to Roush and eos. Being familiar with both companies, I was excited to take a look inside their facilities. First up was Roush. A solid performer in the racing world, it still carries the most wins than any other team in history. On top of being good at what it does, Roush started winning early and expanded into multiple types of racing. Today Roush may be best known for its racing performance parts.
Why Most IIoT Predictions are Wrong
But without a standard measurement of what an IoT device is, predictions can be hard and it can be easy to let hype take over. This article will look at a new infographic and what is happening in the market to differentiate hype from reality. Psikick.com, a company that offers sensing without a battery, noticed a trend of shrinking IoT predictions across multiple companies.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Jeff
Contact Jeff, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack