Figure 1 Abstract This article presents practical principles for optimizing direct sampling ADC spurious performance in phased array systems. Principles presented are supported by measured data on a commercially available X-band 16T16R direct sampling platform. ADC spurs are discussed and related to well-understood spurious limitations from radio frequency (RF) mixers. Measured data shows spurious performance across X-band for individual channels and dynamic range improvements as channels combine.
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Peter Delos
Hybrid Beamforming Receiver Dynamic Range Theory to Practice
This article covers the following comparison of measurements vs. analysis for receiver dynamic range metrics in a phased array hybrid beamforming architecture. A commercially available 32-channel development platform is used to validate the analysis with measurements. The receiver analysis for subarray beamforming is reviewed, with an emphasis on handling the differences between signal gain and noise gain at the point where signals are combined in the analog subarray.
12.22.22 -- How Can Crest Factor Be Used To Assess Amplifier Linearity?
By John Oncea, Editor Interferometry is a technique often applied in astronomy that allows us to pick up details that even the largest telescopes today cannot resolve. It has been used to measure the speed of light in different directions and create the first-ever image of a black hole. So, what’s next?
11.08.22 -- How To Solve The 3 Most Common SiC Issues In EVs
Learn about WaveFarer's new features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls, windows, and more. Remcom demonstrates these and other new capabilities using a sample drive scenario as well as an indoor mmWave sensor scenario.
08.09.22 -- Easy Testing Of Interferometric Direction Finders | 3 Leading Defense Markets For SDRs
By Mercury Systems, Inc. To support ever-increasing computational challenges in radar, engineers must consider new innovative design approaches to meet real-time performance expectations. Utilizing new technology, it's now possible to solve the most advanced radar, cognitive EW, and AI challenges, all on a single board.
A Review Of Wideband RF Receiver Architecture Options
By Peter Delos, Analog Devices The heterodyne receiver has been the standard receiver option of choice for decades. In recent years, the rapid advance of analog-to-digital converter (ADC) sampling rates, the inclusion of embedded digital processing, and the integration of matched channels now offers options for the receiver architect that were not practical only a few years ago.
A Review Of Wideband RF Receiver Architecture Options
By Peter Delos, Analog Devices The heterodyne receiver has been the standard receiver option of choice for decades. In recent years, the rapid advance of analog-to-digital converter (ADC) sampling rates, the inclusion of embedded digital processing, and the integration of matched channels now offers options for the receiver architect that were not practical only a few years ago.
07.07.22 -- What Happened At IMS 2022?
By Abby Proch, Editor Like much of the sentiment heard regarding conferences this year, the return to in-person gatherings has been much needed and much enjoyed. IMS 2022 in Denver was no different. Hear what some attendees had to say.
A Measurement Summary Of Distributed Direct Sampling S-Band Receivers For Phased Arrays Original
By Peter Delos, Mike Jones, and Hal Owens This piece details performance measurements vs. predictions of a 16-channel S-band direct sampling receiver design. The design is based on recently released direct sampling analog-to-digital converters (ADCs) clocked at 4 GSPS and sampling in the second Nyquist zone of the converter. Download the full white paper to learn more.
05.17.22 -- A Day In The Life Of An RF/Microwave Attenuator
By JFW Industries, Inc. Fixed RF attenuators are versatile components that not only provide useful level control features, but they can be used to enhance the return loss at the input of a mismatched component/device in the signal chain, reducing the effective VSWR at that port. This article explains how RF fixed attenuators are used in hopes of improving the VSWR within the signal chain.
Empirically Based Multichannel Phase Noise Model Validated In A 16-Channel Demonstrator
By Peter Delos and Michael Jones, ADI This article details a systematic approach for predicting phase noise in large multichannel systems and compares it with measurements on a 16-channel S-band demonstrator. This analytic approach is based on a small set of measurements that can be used to estimate correlated vs. uncorrelated noise contributions. Based on only a few measurements, phase noise under a wide range of conditions can be predicted.
Empirically Based Multichannel Phase Noise Model Validated In A 16-Channel Demonstrator
By Peter Delos and Michael Jones, ADI This article details a systematic approach for predicting phase noise in large multichannel systems and compares it with measurements on a 16-channel S-band demonstrator. This analytic approach is based on a small set of measurements that can be used to estimate correlated vs. uncorrelated noise contributions. Based on only a few measurements, phase noise under a wide range of conditions can be predicted.
Transceiver Phase Noise Teardown Informs Performance Capability With An External LO
By Peter Delos, Analog Devices Software-defined radios are one of the leading topics in the industry today. The software-defined radio’s performance capability has been fueled by the release of radio frequency (RF) transceivers offering complete radio solutions in monolithic integrated circuits (ICs). The Analog Devices transceiver product line provides an enabling IC, proliferating into many radio designs that are completely software controlled.
Power-Up Phase Determinism Using Multichip Synchronization Features in Integrated Wideband DACs and ADCs
By Michael Jones, Michael Hennerich, and Peter Delos, Analog Devices The integration of multiple digital signal processing (DSP) blocks, wideband digital-to-analog converters (DACs), and wideband analog-to-digital converters (ADCs) within a single monolithic chip is now enabling the offload of power hungry FPGA resources to allow for smaller footprint, lower power, increased channel count platforms that can sample at higher rates than previously achievable.
Phased-Array Antenna Patterns (Part 6)-Sidelobes and Tapering
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format. Previously in this series, weintroducedthephased-arrayconcept,beamsteering,andarraygain. Then we presented the concepts of grating lobes and beam squint. In this final part, we will discussantennasidelobesandtheeffectoftapering across an array.
Phased-Array Antenna Patterns (Part 5)-Beam Squint
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format. In previous parts of this series, we described how, when a wavefront approaches an array of elements, there’s a time delay between elements based on the wavefront angle θ relative to boresight. For a single frequency, the beamsteering can be accomplished by replacing the time delay with a phase shift.
Phased-Array Antenna Patterns (Part 4)-Grating Lobes
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format. In the first three parts of this series, we introduced the phased-array steering concept and looked at the influencers on array gain. In the next two parts, we’ll discuss grating lobes and beam squint.
Phased-Array Antenna Patterns (Part 3)-Linear-Array Beam Characteristics and Array Factor
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format. In Part 1, we covered beam direction and working with a uniformly spaced linear array of antennas. Part 2 focused on antenna gain, directivity, and aperture, as well as array factors. In Part 3, we’ll dive into beamwidth, combining element and array factors, and antenna plots.
Phased-Array Antenna Patterns (Part 2)-Linear-Array Beam Characteristics and Array Factor
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format. Part 1 of the series covered beam direction and working with a uniformly spaced linear array of antennas. In part 2, we’ll cover antenna gain, directivity, and aperture, as well as array factors. Antenna Gain, Directivity, and Aperture Before we go too far, it’s helpful to define antenna gain, directivity, and aperture.
Phased-Array Antenna Patterns (Part 2)-Linear-Array Beam Characteristics and Array Factor
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format. Part 1 of the series covered beam direction and working with a uniformly spaced linear array of antennas. In part 2, we’ll cover antenna gain, directivity, and aperture, as well as array factors. Antenna Gain, Directivity, and Aperture Before we go too far, it’s helpful to define antenna gain, directivity, and aperture.
Phased-Array Antenna Patterns (Part 1)-Linear-Array Beam Characteristics and Array Factor
>> Microwaves & RF Resources .. >> Library: Article Series .. .. >> Topic: Phased-Array Antenna Design .. ... .. >> Phased-Array Antenna Patterns Download this article in PDF format.
BAE Systems MATRICs™ Transceiver
The MATRICs™ Transceiver is poised to cross over from defense applications to commercial markets with the latest non-ITAR version. The ultra-wideband reconfigurable transceiver system on a chip has immediate applications as a software defined radio prototyping platform for commercial RF/mm-Wave applications, including 5G FR2 and point 2 points links.
Analyze Pulse Width Modulated Signals
Pulse width modulation (PWM) is a commonplace technique for efficiently driving switched mode supplies at a fixed frequency. This applies to many types of power supplies in industrial control systems, power electronics and digital communications.
Design of a Complete RF Downconverter Module for Test Equipment
RF/microwave modules, often referred to as “hybrids,” integrate functional blocks used to transmit and/or receive radio signals. These hybrid circuits combine different technologies, including monolithic microwave integrated circuits (MMICs)/RFICs, discrete field-effect transistors (FETs), and passive devices attached to substrates such as alumina or FR4, which contain circuit traces and distributed components, all within a single housing or enclosure.
NewSpace Terminal Testing Challenges and Considerations
NewSpace Terminal Testing Challenges and ConsiderationsToday’s satellite communication systems combine features from legacy cellular networks and emerging wireless technologies. New constellations are under development that attempt to provide ubiquitous mobility and internet networks via satellites, ground stations and user terminals. Please note: By downloading a white paper, the details of your profile will be shared with the sponsoring company and you may be contacted by them directly.
Dk Measurements are Affected by Various Test Methods
Mobile wireless communications systems are moving to their fifth generation (5G) and with them, the world is moving to millimeter-wave (mmWave) frequencies. For many circuit designers, this means taking a hard look at their choice of printed circuit board (PCB) material to understand how well it will perform in 5G circuits and systems at mmWave frequencies.
TMD Technologies Takes Share in GaN Power Amplifier specialist Diamond Microwave Limited
Home » TMD Technologies Takes Share in GaN Power Amplifier specialist Diamond Microwave Limited As part of a strategic investment programme, TMD Technologies Ltd (TMD), world class West London based manufacturer of advanced equipment for the microwave industry, has taken a share in Diamond Microwave Ltd (DML), a specialist in high-power solid-state microwave amplifier products utilising gallium nitride (GaN) and GaAs technology.
Passive Plus, Inc. Broadband Capacitors: 0201BB & 0402BB
Passive Plus, Inc. (PPI) customers requiring surface-mountable capacitors that provide resonance-free, low insertion loss, low reflection operation over extremely large RF bandwidths will be well served by Passive Plus's BB series. The 0201BB and 0402BB case sizes are available in 10nF and 100nF, and Tin (RoHS), Tin/Lead or Gold terminations. These capacitors are intended primarily for coupling RF signals or, occasionally, for bypassing them to ground while blocking DC.
Spectrum Adds Four New LXI-Based AWG Instruments for High Amplitude Signal Generation
Home » Spectrum Adds Four New LXI-Based AWG Instruments for High Amplitude Signal Generation The ability of Arbitrary Waveform Generators (AWGs) to recreate virtually any waveshape makes them especially useful as signal generators in today’s sophisticated electronic systems. Spectrum Instrumentation recently released four new models in its generatorNETBOX family with output swings of up to 24 volts on up to 8 channels, to cover even the most demanding test applications.
USB Power Sensor: PSP102
PSP102 USB power sensor offers a distinct advantage over most USB power sensors, by providing measurement capability down to 4 kHz and up to 6 GHz. The PSP102 utilizes a much faster sample rate than traditional power sensors, allowing for measurement of typical EMC modulation envelopes, such as AM and PM. These sensors are ideal for conducted and radiated immunity applications; as well as research and development, semiconductor, and wireless testing.
Custom MMIC Begins New Chapter As Part of Qorvo
With Qorvo completing the acquisition of Custom MMIC, Microwave Journal wanted to understand how Custom MMIC will merge into Qorvo. Roger Hall, general manager of Qorvo’s High Performance Solutions (HPS) business, and Paul Blount, the founder of Custom MMIC, graciously responded to our questions: Q&A Roger, how does Custom MMIC fit into Qorvo's strategy?
Skyworks Advances Next Generation WI-FI 6E
Skyworks Solutions, Inc., an innovator of high performance analog semiconductors connecting people, places and things, today announced that it is supporting next generation wireless technologies set forth by Wi-Fi Alliance® and developing advanced connectivity solutions designed to meet future requirements.
Metawave SPEKTRA™ Beamsteering Analog Radar Demonstrating Long-Range, High-Resolution, and Accuracy
Home » Metawave SPEKTRA™ Beamsteering Analog Radar Demonstrating Long-Range, High-Resolution, and Accuracy MetawaveTM announced the successful demonstration of the industry’s first, award-winning, SPEKTRA™ analog beamsteering radar. SPEKTRA is the most accurate and intelligent automotive radar available today able to clearly detect vehicles beyond 300 meters and pedestrians beyond 200 meters with the highest angular resolution.
5G Site Testing Solution from Rohde & Schwarz Bundles Test Tools for gNodeB Site Acceptance and Troubleshooting
Home » 5G Site Testing Solution from Rohde & Schwarz Bundles Test Tools for gNodeB Site Acceptance and Troubleshooting With commercial 5G deployments gathering pace globally, field service teams are facing the challenge of successfully deploying and operating new network infrastructure that has a radically different architecture from previous cellular generations.
Visit TMYTEK to See our Latest 5G Solutions at MWC Barcelona
TMYTEK invites you to visit our booth #H2.J99 at MWC Barcelona from February 24 to 27, 2020. Meanwhile, TMYTEK and NTK Japan will demo the LTCC-based, IF-ready 5G mmWave AiP jointly at booth #CS92. At this exhibition, TMYTEK will be demonstrating our latest 5G products, such as: 5G BBox: It's an innovative beamforming development kit for all 5G antenna/baseband designers. To implement beamforming needs lots of knowledge, including antenna array, active circuit, and control software.
Discover the Latest Game Changer from HUBER+SUHNER - Enabling Fast and Functional 5G Deployment
Book a one-to-one briefing with HUBER+SUHNER at Mobile World Congress 2020 to learn about a brand-new 5G development, that is already being used by Deutsche Telekom, to increase capacity in regional hotspots, create superfast speeds on 4G and 5G, as well as simplify network expansion. Featuring a compact design, the SENCITY Urban 100 & 200 MIMO antennas adopt existing city infrastructure, allowing for widespread and cost-effective deployment of 4G and 5G.
Sprint's Stock Soars More Than 70% After Judge Approves T-Mobile Merger
The $26 billion merger between T-Mobile and Sprint has been approved, ending a years-long attempt to combine the United States' third- and fourth-largest wireless carriers. A federal judge ruled Tuesday in favor of allowing the two telecom giants to combine, a decision that is expected to dramatically change the landscape of the United States wireless market.
Platforms Speed 4G/5G/Network Development
CommAgility has a new reference platform for LTE mobile device or user equipment (UE), enhanced its existing LTE eNodeB platform and released a new graphical LTE Management Tool. The reference platforms provide an integrated, fully tested solution combining CommAgility processing hardware and 3GPP LTE software, delivering a low-cost starting point for system development and deployment useful for 4G/5G researchers, product developers and LTE network engineers.
Breaking Down mmWave Barriers with Holographic Beam Forming®
By Mike Jones and Peter Delos, Analog Devices Inc., Norwood, Mass.
Microwave Journal
COMPONENTS Resistive Power Divider BroadWave Technologies unveiled a new resistive power divider featuring an operating frequency range of DC to 6 GHz. Model 152-215-002 is a 50 Ω, 2-way power divider. This unit has an average power rating of 2 W with 1.5:1 max VSWR. The insertion loss is 6 dB ±1.5 dB nominal, the operating temperature range is 0°C to +70°C and RF connectors are N female.
New VNA Technologies Enable Millimeter-Wave Broadband Testing to 220 GHz
Application development in the millimeter-wave (mmWave) frequencies for terrestrial communication, high-frequency device characterization, automotive radar, and other technologies is increasing. The challenge of testing and characterizing the devices that enable new solutions is becoming increasingly complex.
≥ 300W Rack-Mount TWTAs Cover 2 to 6 and 6 to 18 GHz
dB Control offers two rack-mount traveling wave tube amplifiers (TWTA) for electronic warfare simulation, RFI testing and other applications requiring 300 to 325 W power in the 2 to 18 GHz range. The dB-4345 TWTA provides 325 W CW output power with 55 dB minimum gain across 2 to 6 GHz, and the companion dB-4311M covers 6 to 18 GHz, providing 300 W CW output with 55 dB minimum gain.
Antennas
L-com offers a broad range of antenna solutions across a wide array of applications. Our antennas deliver wireless coverage just about anywhere – inside buildings, around campuses, metropolitan areas, densely populated areas and more. Choose from a variety of wireless antennas in both Directional and Omni-directional styles for indoor and/or outdoor use; in commercial, government or military applications – for a broad range of frequencies.
RF-Comm Adopts Softil Technology to Build Next Generation LTE-R Terminal Devices
Home » RF-Comm Adopts Softil Technology to Build Next Generation LTE-R Terminal Devices Further consolidating its leadership in enabling mission-critical communications (MCC or MCX), Softil announced that its BEEHD technology has been selected by South Korea’s RF-Comm equipment provider to build the next generation of LTE-R high-speed train communications devices for KORAIL, South Korea’s national railroad network.
Anokiwave Expands in San Diego to Accommodate Growth
Anokiwave, Inc. announced the expansion of its San Diego operations to a new facility that will triple its floor space and lab capabilities to meet its growing needs. The location will increase the capabilities of its design center by providing state-of-the-art mmW laboratory for all mmW active antenna and IC design and test, and room to double its local workforce. The move to Sorrento Towers South, in San Diego’s tech hub Sorrento Mesa, was completed in early February 2020.
Rohde & Schwarz Presents Comprehensive IEEE 802.11ax Compliant WLAN Signaling Test Solution
Home » Rohde & Schwarz Presents Comprehensive IEEE 802.11ax Compliant WLAN Signaling Test Solution Rohde & Schwarz offers a broad range of WLAN signaling test solutions in line with IEEE 802.11ax. Access points and WLAN stations can now be tested in single input single output (SISO) and multiple input multiple output (MIMO) mode as well as in single-user or multi-user (OFDMA) operation, even under fading conditions and during IP data application.
Mysterious Repeating Fast Radio Burst Traced to Nearby Galaxy
Astronomers have traced the signal of an enigmatic repeating fast radio burst for only the second time -- and it's in a spiral galaxy similar to our own, not so far away. Fast radio bursts, or FRBs, are millisecond-long bursts of radio waves in space. Individual radio bursts emit once and don't repeat. Repeating fast radio bursts are known to send out short energetic radio waves multiple times.
Dr. Jaume Anguera named IEEE Fellow
Dr. Jaume Anguera is named IEEE Fellow for his contributions to small and multiband antennas for wireless telecommunication devices. The most salient contribution of Anguera, recently named FRACTUS ANTENNAS' CTO, is Virtual Antenna™ technology where he is the lead inventor together with his peer colleagues Dr. Aurora Andújar and Dr. CarlesPuente at NN.
Overcoming challenges in RF power solutions for digital broadcasting
The broadcasting industry is undergoing a period of fundamental change. Across Europe, the rollout of Digital Video Broadcasting - Second Generation Terrestrial (DVB-T2) transmitters continues and meanwhile, in the USA, the FCC has acted to address the looming spectrum crisis caused by the arrival of 5G, initiating a spectrum “repack” process and forcing many broadcasters to change transmission channels.
IEEE Antennas and Propagation Society C. J. Reddy Student Travel Grant
The IEEE Antennas and Propagation Society (AP-S) awards several (~4 or 5) travel grants ($1,500 each) annually to help graduate students attend the annual IEEE International Symposium on Antennas and Propagation. To be eligible, each applicant must… be a graduate student (MS or PhD) enrolled in electrical engineering or a related field at an accredited institution of higher learning. be an IEEE AP-S (student) member. have the endorsement of a faculty advisor who is a member of IEEE AP-S.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Peter
Contact Peter, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack