Nanoscale transistors demand aggressive scaling of all channel dimensions—length, width and thickness. Two-dimensional semiconductors (2DS) provide …
Is this you? As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.
Claim your profile
Articles by Eric Pop
Scaling nanoribbon transistors with monolayer transition metal dichalcogenides
Abstract Nanoscale transistors demand aggressive scaling of all channel dimensions—length, width and thickness. Two-dimensional semiconductors (2DS) provide the ultimate thickness limit, yet good device performance has largely remained restricted to micrometre-wide channels. Here we report monolayer 2DS nanoribbon transistors with both n- and p-type operation, fabricated by a top-down multipatterning process that includes ‘anchored’ contacts to limit nanoribbon delamination.
Flexible radio-frequency carbon nanotube transistors operating at frequencies above 100 GHz
|
By Fan Xia, Tian Xia, Haotian Su, Lanyue Gan, Qianlan Hu, Wanyi Wang, Ruyi Huang, Tianshun Bai, Yufan Chen, Chao Ma, Guanhua Long, Shan Wang Verified, Eric Pop, Lian-Mao Peng, Youfan Hu
|
Nature
Verified
Abstract The development of the sixth generation of wireless communications technology requires terminals that can operate at frequencies above 100 GHz. For human-centric applications, these terminals should also be flexible and have low power. However, current flexible radio-frequency transistors typically have lower maximum frequencies, in part due to the poor thermal conductivity of flexible substrates.
Transition metal dichalcogenide solar cells for indoor energy harvesting
Keywords indoor photovoltaics transition metal dichalcogenides detailed balance modeling Internet of Things Device Translation and Integration DTI-1: Understand Introduction As the Internet of Things (IoT) expands, the need for reliable energy sources to power IoT devices becomes increasingly vital, especially within indoor environments.
Surface conduction and reduced electrical resistivity in ultrathin noncrystalline NbP semimetal
Acknowledgments We dedicate this work in memory of the late Prof. A. K. M. Newaz (San Francisco State University) and Prof. E. Reed (Stanford University). We are grateful for discussions with them throughout the years and for their contribution to the scientific community. We also acknowledge Prof. H.-S. P. Wong for discussions and encouragement related to this work. A.I.K. is thankful to J. McVittie and C. Kline for their support and discussion regarding materials deposition, to S.
Axon-like active signal transmission - Nature
Abstract Any electrical signal propagating in a metallic conductor loses amplitude due to the natural resistance of the metal. Compensating for such losses presently requires repeatedly breaking the conductor and interposing amplifiers that consume and regenerate the signal. This century-old primitive severely constrains the design and performance of modern interconnect-dense chips1.
Thermal Transport in Layered Materials, Devices, and Systems
0 users 0 questions (Ask a question) 0 review(s) (Review this) Abstract The Viskanta Lecture The thermal properties of layered materials (like graphene and MoS2) are an active area of investigation, particularly due to their anisotropic and tunable thermal conductivity. We have studied their behavior as part of transistors [1,2], where self-heating is a major challenge for performance and reliability.
What Are 2D Materials Good For?
0 users 0 questions (Ask a question) 0 review(s) (Review this) Abstract This talk will present my (admittedly biased) perspective of what two-dimensional (2D) materials could be good for. For example, they may be good for applications where their ultrathin nature and lack of dangling bonds give them distinct advantages, such as flexible electronics [1] or DNA-sorting nanopores [2].
A disposable reader-sensor solution for wireless temperature logging
Highlights • A battery-free, sticker-like reader for wireless passive sensors • A passive wireless sensor capable of recording temperature abuse history • Utilizing self-oscillation for reader simplicity rather than forced excitation The bigger picture The applications of passive wireless sensors are expected to continue growing due to their simplicity, which facilitates daily usage. Ideally, a sensor should be capable of measuring non-transient data, a challenge given their minimalistic design.
Thiol-based defect healing of WSe2 and WS2 - npj 2D Materials and Applications
Abstract Recent research on two-dimensional (2D) transition metal dichalcogenides (TMDCs) has led to remarkable discoveries of fundamental phenomena and to device applications with technological potential. Large-scale TMDCs grown by chemical vapor deposition (CVD) are now available at continuously improving quality, but native defects and natural degradation in these materials still present significant challenges.
Imaging the electron charge density in monolayer MoS2 at the Ångstrom scale - Nature Communications
Abstract Four-dimensional scanning transmission electron microscopy (4D-STEM) has recently gained widespread attention for its ability to image atomic electric fields with sub-Ångstrom spatial resolution. These electric field maps represent the integrated effect of the nucleus, core electrons and valence electrons, and separating their contributions is non-trivial.
A Purcell-enabled monolayer semiconductor free-space optical modulator - Nature Photonics
Author notes These authors contributed equally: Jung-Hwan Song, Fenghao Xu, Jorik van de Groep. Authors and Affiliations Geballe Laboratory for Advanced Materials, Stanford University, Stanford, CA, USA Qitong Li, Jung-Hwan Song, Fenghao Xu, Jorik van de Groep, Jiho Hong, Yan Joe Lee & Mark L.
Approaching the quantum limit in two-dimensional semiconductor contacts - Nature
Abstract The development of next-generation electronics requires scaling of channel material thickness down to the two-dimensional limit while maintaining ultralow contact resistance1,2. Transition-metal dichalcogenides can sustain transistor scaling to the end of roadmap, but despite a myriad of efforts, the device performance remains contact-limited3,4,5,6,7,8,9,10,11,12.
Electrically driven reprogrammable phase-change metasurface reaching 80% efficiency - Nature Communications
Abstract Phase-change materials (PCMs) offer a compelling platform for active metaoptics, owing to their large index contrast and fast yet stable phase transition attributes. Despite recent advances in phase-change metasurfaces, a fully integrable solution that combines pronounced tuning measures, i.e., efficiency, dynamic range, speed, and power consumption, is still elusive.
Stanford's graphene heat shield is only 10 atoms thick
Keeping electronic devices cool is vital in order to keep them functioning properly, but the components used to contain the heat can add quite a bit of bulk to their overall size. Electrical engineers at Stanford University have developed a promising, atomically-thin alternative based on graphene that offers excellent thermal insulation, despite being 50,000 times thinner than a sheet of paper.
Recommended Methods to Study Resistive Switching Devices
Resistive switching (RS) is an interesting property shown by some materials systems that, especially during the last decade, has gained a lot of interest for the fabrication of electronic devices, with electronic nonvolatile memories being those that have received the most attention.
GST-on-silicon hybrid nanophotonic integrated circuits: a non-volatile quasi-continuously reprogrammable platform
Z. Yu, J. Zheng, P. Xu, W. Zhang, and Y. Wu, “Ultracompact Electro-Optical Modulator-Based Ge2Sb2Te5 on Silicon,” IEEE Photonics Technol. Lett. 30(3), 250–253 (2018). [Crossref] Q. Zhang, Y. Zhang, J. Li, R. Soref, T. Gu, and J. Hu, “Broadband nonvolatile photonic switching based on optical phase change materials: beyond the classical figure-of-merit,” Opt. Lett. 43(1), 94–97 (2018). [Crossref] [PubMed] K. Kato, M. Kuwahara, H. Kawashima, T. Tsuruoka, and H.
Theoretical potential for low energy consumption phase change memory utilizing electrostatically-induced structural phase transitions in 2D materials
Using the DFT-based approach developed in ref. 17, we compute the voltage-excess charge phase diagram of monolayer MoTe under electrostatic gating. This DFT-based approach models the parallel plate capacitor structure shown in Fig. 1a to gate the monolayer. In this capacitor structure, a dielectric medium of thickness d is sandwiched between the monolayer and a metal plate (i.e., gate electrode). The Mo atoms in the monolayer (colored black in Fig.
Kinetic Study of Hydrogen Evolution Reaction over Strained MoS2 with Sulfur Vacancies Using Scanning Electrochemical Microscopy
Molybdenum disulfide (MoS ), with its active edge sites, is a proposed alternative to platinum for catalyzing the hydrogen evolution reaction (HER). Recently, the inert basal plane of MoS was successfully activated and optimized with excellent intrinsic HER activity by creating and further straining sulfur (S) vacancies. Nevertheless, little is known about the HER kinetics of those S vacancies and the additional effects from elastic tensile strain.
Show More
loading
Actions
Is this you?
As a journalist, you can create a free Muck Rack account to customize your profile, list your contact preferences, and upload a portfolio of your best work.Get in touch with Eric
Contact Eric, search articles and posts on X, monitor coverage, and track replies from one place.
Learn more about Muck Rack